Classic Monitor® Tub & Shower - Complete Rough and Trim

Model #:1343

What does this model number mean?

Finish Shown: Chrome
List Price as
Shown (US $):1
$170.10
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • WaterSense certification promotes water conservation
  • Monitor pressure balance valve keeps water temperature within a safe ±3° F (±1.6° C), helping to protect you from sudden changes in hot or cold water pressure
  • Complete unit includes trim and rough-in
  • 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa maximum water usage
  • Meets standards set by Americans with Disabilities Act (ADA)
  • Spray settings include: Full Body
  • Lifetime Faucet and Finish Warranty
Watersense certified by CSA International

This product meets EPA criteria for WaterSense

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

  • Valve Type: Single-function pressure balance cartridge
  • Flow Rate: 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa maximum water usage
  • Spray Settings: Full Body Spray

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Coordinating Items

Reviews

From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(2 Questions : 2 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Classic Monitor® Tub & Shower - Complete Rough and Trim
 
1 answer

Question about the model and repairing

1. I want to check whether the attached photo is this model: Classic Monitor® Tub & Shower - Complete Rough and Trim

2. Also, when I close up all of the switches in shower, there are still water dripping on the bottom part.
In this case, which part should I replace?

3. To replace it which size Allen wrench should I use?

Thanks and have a great day.
Topics: Care/Maintenance
Gender: Male
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Beginner
User submitted photo
User submitted photo
User submitted photo
3 months ago
Customer avatar
by
KSYI
canada
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi KSYI, Thank you for your question. Replacing the cartridge in your Classic Monitor Tub & Shower should stop the leak. The model 1343 was made with 2 different cartridges depending on the age of the faucet. If the faucet is older than 2006 and the upper portion on the cartridge is white the RP19804 will be the replacement cartridge. If the faucet is from February 2006 or newer and the upper portion of the cartridge is gray then the RP46074 is the correct cartridge. A 1/8" allen wrench should remove the handle set screw.
Thanks,
Dave
Skill Level: Advanced
3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Classic Monitor® Tub & Shower - Complete Rough and Trim
 
1 answer

I would like to replace the faucet trim of my model 1343 faucet with an oil rubbed colored one.

What other trim kits would fit my faucet without any modifications?
Topics: other
1 year, 5 months ago
Customer avatar
by
Barry
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Barry,

Thank you for your question. Depending on how old your faucet is, you can replace your trim without replacing the valve. If your valve was installed after 2006, you will probably have the multi-choice valve in the wall. If this is the case, you can install any of our 1300/1400 or 1700 series trims in your wall.

If it was installed prior to 2006, you can only use the 1300/1400 series trims but you will need to keep your old cartridge. The cartridge that comes with your new trim will not work with the old valve.
Thanks.

Jody
Skill Level: Advanced
1 year, 5 months ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2015-04-24T06:16:58.571-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_1343, prod, sort_default
1 of 1
  • 2015-04-24T06:16:58.574-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_1343, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.