Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower

Model #:144710-I

What does this model number mean?

List Price as
Shown (US $):1
$308.65
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • 5-function multi-spray showerhead
  • In2ition showerhead and handshower can be used together or separately to get water where you need it most
  • Features MultiChoice Universal Valve that allows future shower function upgrades or style changes easily without altering the plumbing behind the wall
  • Single handle pressure balanced valve with intergrated rotational limit stop to prevent accidental scalding
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

View Parts for this Product:

Installation Instructions / Owner's Manual

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Reviews

From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(17 Questions : 17 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

The Ditections are not super clear. How do I install the spout to the copper pipe coming out of the wall?

I have cut the pipe shorter and I can still cut it more if needed but I can not figure out how to make the spout stay on the copper pipe. I've never installed one before and the instructions are not clear. The ones that came with the assembly only show a picture of the spout... not the components of it or how to attach it. does it have to be soldered on or caulked or am I missing something? I can't find a screw for a hex key or anything either.
Topics: Assembly
Age: 25 to 34
Project Type: New
Ownership: < 1 year
Skill Level: Beginner
1 month, 2 weeks ago
Customer avatar
by
FirstTimeInstallation
Atlanta
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi FirstTimeInstallation,

Thank you for your question! The tub spout should have a brass adapter that you can solder onto 1/2" smooth copper pipe or thread onto 1/2" iron pipe. Below is a link to the installation instructions for this spout.

http://www.deltafaucet.com/customer...

Best regards,
Jon
1 month, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

what is the metal piece that's inside the faucet/diverter made of? Is it metal, copper, etc....

Topics: Assembly
Age: 35 to 44
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
1 month, 3 weeks ago
Customer avatar
by
Ray
California
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Ray,

Thank you for your question. The internal spout parts are non-metallic.

Thanks,
Jon
1 month, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

How can I get 10 gpm out of filler spout to fill my tub?

Topics: Features
9 months ago
Customer avatar
by
Bob
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Bob, Thank you for your question. None of our current wall mount tub/shower faucets are capable of a 10 gallon per minute flow rate out of the tub spout. Only our roman tub and free standing tub fillers have that high of a flow rate.
Thanks,
Dave
Skill Level: Advanced
9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

I have a 144710-rb-1 and the water drips out of the tub end faucet how can I trouble shoot this

1 year, 1 month ago
Customer avatar
by
Tony
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Tony, Thank you for your question. If water is leaking out of the tub spout on your model 144710-I when the faucet is off you will want to replace the RP46074 cartridge. Some water leaking out of the tub spout while the shower head is running is normal.
Thanks,
Dave
Skill Level: Advanced
1 year, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

Water coming out from showerhead when only tub spout is in use. How can this problem be corrected?

We just had this model installed in our tub/shower. When we turn on the water to the tub, even if we are not redirecting it to the showerhead, water is going coming out from the showerhead. We tried a replacement with a new cartridge, and verified that there were no obstructions but that did not resolve the issue.
Topics: Performance
1 year, 1 month ago
Customer avatar
by
Marc
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Marc, Thank you for your question. Most likely, you are experiencing "shower-rise" where the water can’t get out of the spout as fast as it flows through the valve. This causes the water to back up and come out the shower head. There can be one of several reasons for this:

The valve could be upside down. The length from the valve to the tub spout is outside of the 8" to 18" rule
There is more than one 90-degree angle
Something other than copper or galvanized pipe was used going to the spout
The most common reason is that there is something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. Something is impeding the flow of water to the spout and causing it to back up and go out the shower head. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage.
If none of these help, you may need to call a plumber. After the shower has been installed and the wall has been closed, there is little that can be done to remedy this situation yourself.
Thanks,
Dave
Skill Level: Advanced
1 year, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Topics: Assembly
1 year, 3 months ago
Customer avatar
by
Lesley
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Lesley, Thank you for your question. The RP29827 renovation cover plate will not fit around the rectangular escutcheon on the Nura model 144710-SS-I faucet. The opening is for a 7" round escutcheon. You could order a RP19809SS round escutcheon separately and replace the one that comes with the faucet trim.
Thanks,
Dave
Skill Level: Advanced
1 year, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

Low water pressure

How can I increase the water flow on this shower head?
Topics: Performance
1 year, 3 months ago
Customer avatar
by
Mike
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Mike, Thank you for your question. The In2ition showerhead that comes in the model 144710-RB-I faucet has a flow rate of 2.5 gallons per minute regardless of whether you are using the fixed, handheld, or both heads together. The flow rate of the showerhead cannot be increased. Check to make sure that the cartridge and showerhead inlet are clean and free of debris and mineral build up.
Thanks,
Dave
Skill Level: Advanced
1 year, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Topics: Features
Project Type: Replacement
1 year, 9 months ago
Customer avatar
by
Ken
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Ken, Thank you for your question. You can cap off the tub spout port on the valve for a shower only installation.
Thanks,
Dave
Skill Level: Advanced
1 year, 9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

Currently have model 144710-I installed. Want to change out to 144910. Do I need to change the universal rough in body behind the wall?

What model of the R10000 is used in model 144710 and what model of the R10000 is used in model 144910?
Topics: Assembly
Age: 55 to 64
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
2 years ago
Customer avatar
by
Louisiana
Louisiana
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Louisiana, Thank you for your question. Both the 144710-I, and the 144710 use the same R10000 multichoice rough in. You will be able to switch out all the external parts and use your existing rough in valve.
Thanks,
Dave
Skill Level: Advanced
2 years ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Monitor® 14 Series Tub and Shower with In2ition® Two-in-One Shower
 
1 answer

I have a Delta 144710-I shower head and faucet. How do I get to the Rotationalal Limiting Stop

I don't see any allen screw to loosen so I can pull off the handle.
Topics: Care/Maintenance
2 years, 2 months ago
Customer avatar
by
Mark
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Mark, Thank you for your question. To remove the handle on your model 144710-I you must remove the button at the end of the handle giving you access to the screw. Once the handle and trim sleeve are removed you should have access to the RLS. I have attached a picture of the faucet break down to assist you with your repair.
Thanks,
Dave
Skill Level: Advanced
User submitted photo
2 years, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
  • 2016-02-12 T06:45:08.596-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_144710-I, prod, sort_default
2 next>>
  • 2016-02-12 T06:45:08.600-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_144710-I, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.