Mandara Monitor 14 Series Tub and Shower

Model #:144962-SS

What does this model number mean?

Finish Shown: Brilliance® Stainless
List Price as
Shown (US $):1
$297.35
Exclusively available at Home Depot.

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • WaterSense certification promotes water conservation
  • Monitor pressure balance valve keeps water temperature within a safe +/-3degrees F (+/-1.6degrees C), helping to protect you from sudden changes in hot or cold water pressure
  • Soft, rubber spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your showerhead and handshower with the touch of a finger
  • Complete unit includes trim and rough-in
  • Single function operation
  • Single lever handle for ease of temperature control
  • Meets standards set by Americans with Disabilities Act (ADA)
  • Spray settings include: Full Body
  • Lifetime Faucet and Finish Warranty
Watersense certified by CSA International

This product meets EPA criteria for WaterSense

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

  • Valve Type: Single-function pressure balance cartridge
  • Flow Rate: 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa maximum water usage
  • Spray Settings: Full Body Spray

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Reviews

Rated 3.2 out of 5 by 6 reviewers.
Rated 2 out of 5 by Handle keeps coming loose I have had this trim kit for about a year (purchased from home depot) and can never get the handle to stay tight. After tightening it several times, I took the handle off and inspected how the set screw tightens against the cartridge stem. The set screw is at an angle to the flat side of the stem instead flush to the flat side of the stem. I believe that this is the problem. I called Delta for help and they are sending me a replacement handle. I asked the CS rep if this was a redesigned handle and he said no. If it is the same handle I have, then I will have the same problem. If this fixes the problem I will reevaluate my review, but the handle staying tight is a basic function of any faucet...especially at $150.00 March 30, 2016
Rated 5 out of 5 by Missing set screw I love the quality and design of this product. BUT... when you buy it be sure the set screw and Allen wrench are still in the package. Two out of the three I inspected at the store were missing. Someone had opened the package and taken the set screw (probably lost theirs, but that doesn't matter... just be sure to check so you get yours.) February 17, 2013
Rated 4 out of 5 by Looks Great....But Tub and Shower faucet looks flawless in my new bathroom, but I am having two issues. 1. The Set Screw was missing 2. The Shower Stays warm, but for whatever reason when I try to fill the tub, the water coming out of the tub spout will not stay warm. Would/Could there be a reason for this? August 3, 2015
Rated 3 out of 5 by Screw for faucet keeps coming off New install. I have to constantly tighten the screw on the handle. Handle keeps coming loose. When i align the hand to tighten screw it is not aligned with the grove part of the stem. July 15, 2014
Rated 2 out of 5 by spouts don't last you would think for the price the spout deflctor would last longer. This is my second one the first one lasted about eight months. This second about two and half years. April 22, 2016
Rated 3 out of 5 by Loud shower head I love Delta products however. The shower head on this one is extremely loud. At a certain temperature it whistles like crazy. March 10, 2013
  • 2016-07-23 T02:10:47.261-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_6, tr_6
  • loc_en_US, sid_144962-SS, prod, sort_default
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(19 Questions : 19 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Tub spout flow rate

Customer avatar
by
Barbara
Phoenix, AZ, USA
Hello, I notice the flow rate for this unit is described as 2 gal/min.
Can you confirm if this is for the shower or the tub spout flow rate?
If for the tub, can this be modified?
Topics: Performance
Project Type: New
Ownership: < 1 year
Skill Level: Beginner
1 year, 1 month ago
Customer avatar
by
Barbara
Phoenix, AZ, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello Barbara!

Thank you for your question! 2.0 gallons per minute is the flow rate of the shower head.
1 year, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet4 is loaded.
Additional information about DeltaFaucet4 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Handle of Mandara Monitor does not point towards "off" when water is shut off

Customer avatar
by
Tom
Pittsburgh, PA, USA
I had a plumber install a Mandara Monitor 14 series tub and shower trim. When he completed the job, I noticed that water temperature handle points 180 deg from the word "off" when the water was shut off. He states that this is normal for Delta. Is this correct? It doesn't seem right to me.
Topics: Assembly
Age: 55 to 64
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
1 year, 5 months ago
Customer avatar
by
Tom
Pittsburgh, PA, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Tom, Thank you for your question. When facing the faucet the handle on the model 144962-SS should be at 3 o-clock when in the off position, which would have it pointing to the "OFF" on the escutcheon plate. The handle should travel upwards to 12 o-clock when turned on. If your handle is pointing at 9 o-clock when off and turns on when moving to 6 o-clock the handle is on backwards. Removing the handle, turning it 180 degrees , and reinstalling should resolve the issue.
Thanks,
Dave
Skill Level: Advanced
1 year, 5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Replacing existing fixturing and wondering about compatability?

Planning on replacing tub and shower fixtures, which are currently Moen brand. Will the Delta 144962-SS be able to be installed easily with existing plumbing, or do I need to stick with Moen? Getting behind the shower wall is not an option.
2 years ago
Customer avatar
by
Tim
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Tim, Thank you for your question. The Delta tub/shower trims are not compatible with other brands rough in valves. The entire faucet would have to be replaced.
Thanks,
Dave
Skill Level: Advanced
2 years ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Can I buy a handle separately?

Customer avatar
by
Shannon
Lenexa, KS, USA
I have a free standing shower separate from the tub and would need two handles for this to be installed in my bathroom. Is there a way (or place) I can buy an additional handle to match this set?
Topics: Purchase, Features, Assembly
Age: 25 to 34
Gender: Female
2 years, 8 months ago
Customer avatar
by
Shannon
Lenexa, KS, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Shannon, Thank you for your question. The RP64861SS handle kit can be ordered separately. The item can be ordered by your local retailer or wholesaler that carries Delta products or online at deltafaucet.com.
Thanks,
Dave
Skill Level: Advanced
2 years, 8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

How do you control the flow volume (gpm) on the device?

Customer avatar
by
Allie
Alexandria, VA
My control knob as installed by my contractor allows for no volume control, so it is either all on or off. This is fine for showers, but full flow makes for a quick fill bath which is not ideal. Is there something the contractor missed that can be modified?
Thanks!
Topics: Performance
Gender: Female
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
2 years, 9 months ago
Customer avatar
by
Allie
Alexandria, VA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Allie,
Thank you for your question. Unfortunately the model 144962-SS Tub/Shower faucet does not have anyway to modify the flowrate from the unit.
Thanks,
Dave
Skill Level: Advanced
2 years, 9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Mandara Collection

Customer avatar
by
DeliveryDriver
Peoria, IL, USA
I am wondering if the Mandara Monitor is available for strictly a shower only?
Topics: Features
Age: 55 to 64
Gender: Male
Project Type: Replacement
Skill Level: Beginner
2 years, 10 months ago
Customer avatar
by
DeliveryDriver
Peoria, IL, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # 144962-SS is only available as a tub/shower combination. You could purchase it and plug off the tub port and not use the tub spout.
Skill Level: Advanced
2 years, 10 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
3 years, 1 month ago
Customer avatar
by
cbeach
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model 144962-SS has an escutcheon plate that is 6 3/8". Most of our other escutcheon plates are 7" so if you need one bigger than that, we suggest purchasing the renovation plate which covers up to 8" center holes. The model number is RP29827SS.
Skill Level: Advanced
3 years, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Will RP19809SS Escutcheon work on this faucet

The hole in the shower is a bit bigger than the escutcheon provided with the faucet. Will RP19809SS work with this faucet? and what is the diameter of RP19809SS?
Topics: Assembly
3 years, 1 month ago
Customer avatar
by
Barb
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # 144962-SS has an escutcheon plate that is 6 3/8" and the RP19809SS is 7" in diameter. You should be able to switch the two plates.
Skill Level: Advanced
3 years, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Is there a larger tub spout adapter?

My existing pipe from my previous Delta tub spout had a 3/4 in thread, and the Mandara offers either a 1/2 in with the included brass adapter or a 1 in without. Without further lengthening the run from the wall, is there an adapter available that can help resolve this?
Topics: Assembly
Age: 25 to 34
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
3 years, 1 month ago
Customer avatar
by
Calypso
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. All of the Delta tub spout are 1/2" threaded or sweated onto pipes. We do not have an adapter available.
Skill Level: Advanced
3 years, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Mandara Monitor 14 Series Tub and Shower
 
1 answer

Does the Manadra 14 Series Tub and Shower have the 2nd controller to utlize the Universal MultiChoice rough?

Customer avatar
by
Keshia
St. Louis, MO, USA
You know how the Dryden 17 series has the 2 handle option on the shower.
Topics: Purchase, Performance
Age: 35 to 44
Gender: Female
Project Type: New
Ownership: < 1 year
3 years, 2 months ago
Customer avatar
by
Keshia
St. Louis, MO, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet does not have a 1700 style available in the Mandara series.
Skill Level: Advanced
3 years, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-07-23 T02:10:38.595-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_144962-SS, prod, sort_default
2 next>>
  • 2016-07-23 T02:10:38.599-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_144962-SS, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.