Celice Two Handle Widespread Lavatory Faucet

Model #:35705LF-SS

What does this model number mean?

Finish Shown: Stainless
List Price as
Shown (US $):1
$248.33
Exclusively available at Lowe's.

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • Distinctive design cues emulate soft contemporary styling with hints of the renaissance era
  • Elegant high arc spout
  • Lever handles for ease of operation
  • Two handle design for precise temperature control
  • Lifetime Faucet and Finish Warranty
Watersense certified by CSA International

This product meets EPA criteria for WaterSense

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Installation Information

3-hole 6-16″ installation
  • Number of Handles: 2
  • Installation Type: Widespread
  • Aerator Type: Cache
  • Valve Type: Washerless stem cartridge
  • Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa
  • Spout Length: 4-15/16″
  • Spout Total Height: 6-15/16″
  • Spout Height Deck to Aerator: 4-7/8″
  • Drain type: Plastic pop-up

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Coordinating Items

Reviews

Celice Two Handle Widespread Lavatory Faucet 4.3 5 3 3
Missing handle set screws This is a very durable, basic faucet and easy to use. We had a plumber install it as part of a bath remodel and he stated there were no set screws for the handles. I called Delta, and they sent replacements to arrive in a week. In the mean time I spent 88 cents at Lowes. That is why I always buy Delta,easy to deal with customer service and get replacement parts. June 24, 2012
Looks great and was easy to install. Purchased this to replace a Delta faucet that was 20 years old. Install was easy and Everything needed was included in the package. Looks great! March 20, 2014
Beautiful looking but some design issues It is a beautiful product that installed relatively easily. However there is a slight design flaw with the drain plug pull. It tends to hit the rubber water hoses under the faucet so it's not as smooth as it could be. Other than that it's a great product. September 5, 2013
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(6 Questions : 6 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Celice Two Handle Widespread Lavatory Faucet
 
1 answer

WHAT SHOWER HANDLE AND HEAD MATCHES THE CELICE FAUCET

Topics: Features
Age: 55 to 64
Gender: Female
Project Type: New
1 month, 1 week ago
Customer avatar
by
CHARLIE
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Charlie, Thank you for your question. The tub/shower faucet offered in the Celice collection is the model 144705-SS. The part number for the showerhead only is RP71015SS and the handle kit is RP71019SS.
Thanks,
Dave
Skill Level: Advanced
1 month, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Celice Two Handle Widespread Lavatory Faucet
 
1 answer

Has this product been discontinued? If not, is it in stock?

1 year ago
Customer avatar
by
MSS
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # 35705LF-SS has not been discontinued and can be purchased at your local Lowes Home Improvement store.

Thanks.

Jody
Skill Level: Advanced
1 year ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Celice Two Handle Widespread Lavatory Faucet
 
1 answer

internals

Customer avatar
by
doctrbob
Modesto, CA, USA
Are the components contained within the valve, etc the same when bought from a big box retail outlet versus a plumbing dealer? I don't mind paying more from a dealer if they are of stronger made materials.

Thanks
Topics: Purchase, Features
Age: 55 to 64
Project Type: New
1 year, 7 months ago
Customer avatar
by
doctrbob
Modesto, CA, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet models are the same no matter who you buy them from. If the model number is the same, then the internal parts and the external parts are exactly the same quality.
Skill Level: Advanced
1 year, 7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Celice Two Handle Widespread Lavatory Faucet
 
1 answer

What is the length and height of the spout, and the measure from deck to aeroator?

2 years ago
Customer avatar
by
Karen
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # 35705LF-SS has a spout length of 4 15/16 inches, spout height of 6 15/16 inches, from the deck to the aerator is 4 7/8 inches.

Included here is the spec sheet just in case you needed other measurements.

http://www.deltafaucet.com/customer...
Skill Level: Advanced
2 years ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Celice Two Handle Widespread Lavatory Faucet
 
1 answer

Did we install our faucet correctly?

We recently remodeled our bathroom and used the Celice collection for many of the fixtures, including the faucets for the sink. Our contractor did everything for us. In order to turn on the water for the sink we have to push the handle towards the wall (away from ourselves), instead of pulling the handle away from the wall (toward ourselves). Is this correct? We felt like he installed them backwards but he said that was how the instructions read. Thanks for your help.
Topics: Assembly
Age: 35 to 44
Gender: Male
Project Type: New
Ownership: < 1 year
2 years, 2 months ago
Customer avatar
by
Brbarga
GA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model 35705LF-SS should rotate towards you to operate on and off. We recommend removing the handles and looking inside them. They should say C for Cold and H for Hot. Also look underneath the sink and the longer of the two tubes should be on the outside of the faucet. If they are not, then the sides, were switched. You should be able just to switch the handles and make it work so that the handles point towards you when turning on the faucet. Make sure you turn off the water to the faucet before taking off the handles.
Skill Level: Advanced
2 years, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Celice Two Handle Widespread Lavatory Faucet
 
1 answer

where is this product manufacured ? what is the material content?

Topics: content/manufactured
2 years, 3 months ago
Customer avatar
by
laura
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your questions. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Regarding the material content, our faucets are made of metallic and non-metallic elements.
Skill Level: Advanced
2 years, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.