Hi Track 33, Thank you for your question. Flow restrictors are usually found in the neck or threaded end of the shower head exposed when the shower head is removed from the shower arm.
While it is possible to remove flow restrictors from shower heads, we strongly advise against it for several reasons.
Our H2Okinetic showering devices are specifically designed to operate most efficiently at the flow rate controlled by the flow restrictor. Removing the flow restrictor from an H2Okinetic showering device will result in improper operation and a very uncomfortable experience.
For water conservation purposes, most plumbing codes require faucets and showering devices to not exceed a certain maximum flow rate. Removing the flow restrictors could cause these devices to no longer meet these codes.
If you are noticing decreased water pressure or a poor quality flow rate, you may have debris in your flow restrictor or the screen filter in your shower head or aerator. Often this is easily remedied with a simple cleaning process.