Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets

Model #:R10000-UNBX

What does this model number mean?

List Price as
Shown (US $):1
$50.70
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • MultiChoice Universal valve body only
  • Accepts single, dual, or dual thermostatic cartridge
  • Cartridge ships with trim
  • Back-to-back capability
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Reviews

Rated 4.6 out of 5 by 110 reviewers.
Rated 3 out of 5 by Versitility Check review for T17430-MTS. Will be used in conjunction with it. Even though we've had this product for a year, have not had a chance to install yet. Was looking for unit with separate water volume and temp control. Could not find at local stores, found on line. Started looking at units knowing we wanted to replace existing cruddy ones with parts missing at some time. When these were found, went ahead and made the purchase. So at this point can only say they look good and will serve the purpose. March 2, 2016
Rated 5 out of 5 by BEST VALVE This is a universal pressure balance valve. I love this product because it truly is UNIVERSAL with any delta trim sets! It is extremly simple to install and even more simple to operate. I highly suggest using this valve when you are remodeling your bathroom. January 12, 2013
Rated 2 out of 5 by Shower Head is Leaking Had Delta Model 10000 valve put in with a shower head about 13 months ago. Shower head is now dripping. Hate to see new product not performing so soon after installation. April 23, 2013
Rated 5 out of 5 by Heavy duty. This is a required building block for the TempAssure® 17T shower faucet. It is made from heavy duty brass and installs easily. All faucet items fit flawlessly. June 29, 2016
Rated 2 out of 5 by shower head is dripping the shower head is dripping just 4 months after we renovated our bathroom. I would think the shower head would last much longer than a few months February 19, 2016
Rated 3 out of 5 by Replacing Rough Valve in old wall The product was fine, and the final result was good. I was replacing a 70-year old shower valve that was leaking, motivated by a desire to upgrade to a modern cartridge type. I wish I had paid more attention to physical dimensions of the new valve. With the (well-built) thickness of my existing plaster/tile wall, the valve wouldn't protrude far enough into the shower side of the wall. With a lot of chiseling of concrete, I finally got the job done. If such a longer-throat valve exists, it would have made the job a lot easier. If you have an older, thicker wall, look for such a valve. August 29, 2012
Rated 3 out of 5 by Great product, Faucet direct website recomended wrong valve Just purchased the R10000-UNBX Delta Universal valve as part of ordering a shower only control and shower head. The website said this was the model needed. However this model is used for Shower and Tub combinations not shower only. I will be returning and getting R10000 UNWSHF. The WS is a great feature that shuts the water off so you can work on the faucet without turning off the water. The HF is High Flow and means the port to the tub is already blocked. An added feature is the connections have male threads on outside. If you want to sweat the lines you need a different model. February 7, 2015
Rated 4 out of 5 by Good but not all there To keep it simple, make sure you by the version with the shotoff valve unless you can install the control of the shower as this piece doesn't have the ability to stop the water without it! Once the shower compnent was added this worked like a champ, but took a few frustrating moments of reading and re-reading the installation instructions to discover that it never talked about how to shutoff the water when it's turned on to re=pressurize your lines. - YOU NEED the shower controls or the other style that has the valve in it! October 13, 2008
  • 2016-07-23 T02:15:37.363-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_110, tr_110
  • loc_en_US, sid_R10000-UNBX, prod, sort_default
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(97 Questions : 102 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

Are rough in kits all brass?

2 weeks, 1 day ago
Customer avatar
by
JC
Sarasota, FL, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi JC,

Thank you for your question. The valve body is forged brass.

Best regards,
Jon
2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

Will the Delta MultiChoice Universal Tub and Shower work with other brand name faucet/shower trims/cartridges?

Also, will it work with a two shower head configuration. If so, what other valves or cartridges would it need to keep temperature and pressure consistent if both were used simultaneously?
Topics: Assembly
Age: 45 to 54
Gender: Female
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
1 month, 1 week ago
Customer avatar
by
SE
WA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi SE, Thank you for your question!
Our Delta products are manufactured to only be used with other Delta products. We are unable to tell you if our rough in valve will work on other brands trims/cartridges. Also, the valve is not manufactured to control two separate shower heads. You will need either a shower arm diverter or a in wall diverter such as our R11000 3 port 6 function diverter with your choice of trim.

Best regards,
Brandis
1 month, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

I need valve trim for Delta R10000UN Cartridge and Trim Kit (shower only) in Antique Brass finish. Is it available? Where can I order it?

I also need Delta Vessel Sink Faucet and 1- hole high rise Lav Faucets in Antique Brass. Are these available.
Topics: Purchase
Age: 55 to 64
Project Type: New
Ownership: < 1 year
Skill Level: Advanced
4 days ago
Customer avatar
by
GL
Las Cruces, NM
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello GL, Thank you for your question!
We no longer manufacture any product in the Antique Brass finish.

Best regards,
Brandis
4 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

How do I cap the shower port?

We're using R10000-UNBX for a tub only installation. Should the cap for the shower port be made of brass?
Topics: Assembly
Project Type: New
Skill Level: Beginner
1 month, 3 weeks ago
Customer avatar
by
LG
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi LG, Thank you for your question!
You will need to plug off the shower port with your choice of pipe plug. The plug can be threaded or soldered.

Best regards,
Brandis
1 month, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

how many turns to fully open "stops"

Can't seem to find how many turns to fully open the stops after testing valve and connections. I do o not want to sacrifice water pressure by not opening enough, yet I do not want the risk leakage by opening too far. exactly how many revolutions do you open when you put the valve in service to consider it "fully open". Thank you
Bob
Topics: Assembly
Age: 55 to 64
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
1 month, 2 weeks ago
Customer avatar
by
Bob F
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Bob,

Thank you for your question! The supply stop with stop turning when it is fully opened, and should remain water-tight. From the fully open position, the stops can be tightened 3 turns without a noticeable reduction of flow.

Best regards,
Jon
1 month, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

Can valve #r1000-unws be used in both a shower/tub and shower only

Topics: Assembly
Age: 45 to 54
Project Type: New
3 months ago
Customer avatar
by
Kathy
Georgia
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Dear Kathy,

Thank you for you question!

Yes, the R10000-UNWS valve can be used for either a tub/shower or shower only application. When you are installing it for shower only, simply cap the bottom port of the valve.

Best Regards,

Daniel.
3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta5 is loaded.
Additional information about Delta5 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

What shower trim sets can I use with this shower valve

4 months, 2 weeks ago
Customer avatar
by
Leigh
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Leigh,

Thank you for your question! Any 13, 14, 17, or 17T series trim kit that we currently make will work with this rough-in valve. Trim-only kits will begin with the letter "T".

http://www.deltafaucet.com/bath/tub...

Best regards,
Jon
4 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

What is considered the "finished wall" for installing a Delta R10000 Multi Choice value in an acrylic walk in shower unit??

For installing with a MAXX shower unit, the plasterguard should be flushed with the acrylic wall section (that is, the same as if you were installing with a tiled wall)?
Topics: Assembly
Age: 65 or over
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
4 months, 3 weeks ago
Customer avatar
by
Jerry67
Creston, BC V0B, Canada
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers

Answer: 
Hi Jerry67,

Thank you for your question. That is correct! The finished wall will be the final surface after everything is installed. The acrylic wall section would be considered the finished wall in your installation.

Best regards,
Jon
4 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

I installed a R10000 unbx valve body by a Delta manufacture rep, will it work for a shower only install (no tub)?

Topics: Performance
5 months ago
Customer avatar
by
Michael
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello Michael,

Thanks for your question!

The R10000-UNBX will work in a tub only installation. However, you will need to cap the bottom port since you are not using a tub spout.

I hope this helps!
5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet9 is loaded.
Additional information about DeltaFaucet9 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta MultiChoice Universal Tub and Shower Valve Body - Universal Inlets / Outlets
 
1 answer

R10000 Rough in Body w/Stops version. (17T)

On either side of the valve body, there are two (2) mechanical stem and nut assemblies. I assume, when turning the stem(s) clockwise, and the stem(s) bottom out, this will stop the flow of water completely.
Conversely, if I turn the stem counter-clockwise the flow of water increases. How can I tell, without backing the stem out further than need be, will I get full flow?
Instructions say " adjust stem clockwise to close, and counterclockwise to open".
I'm not sure if I understand the purpose of these stops.

Thanks
Topics: Assembly
Project Type: Replacement
Skill Level: Intermediate
5 months, 3 weeks ago
Customer avatar
by
Rick
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Rick,

Thank you for your question. These stops are designed to turn the water off directly at the valve during installation or repairs. They should be left in the open position when the trim is installed, as the cartridge will be used to turn the water on and off.

Best regards,
Jon
5 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
  • 2016-07-23 T02:18:59.197-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_R10000-UNBX, prod, sort_default
2 3 4 next>>
  • 2016-07-23 T02:18:59.202-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_R10000-UNBX, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.
  2. HGTV and HGTV Dream Home and their associated logos are trademarks of Scripps Networks, LLC. Used with permission; all rights reserved.