Delta 3 / 6-Setting Diverter Rough

Model #:R11000

What does this model number mean?

List Price as
Shown (US $):1
$109.35
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • 3-port, 6-setting diverter with 3 individual and 3 shared positions
  • 2-port, 3-setting diverter with 2 individual and 1 shared position
  • 1/2" universal inlets/outlets
  • Cartridge ships with trim
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Reviews

Rated 4.3 out of 5 by 12 reviewers.
Rated 1 out of 5 by Good luck If you install this valve the way the rough in tells you too, you will be very disappointed. Our valve trimmed out perfect and this transfer valve was to far back in the wall. And of course they don't make an extension for this. We had to cut open a tile wall on the other side of the valve to offset this valve above the shower valve causing us to look bad. Also install the cartridge at rough, good luck trying to remove the bonnet nut when it is an 1/8 inch behind the finished wall. January 17, 2013
Rated 4 out of 5 by Good but not allowed in New Jersey Product was installed but I found out later that it does not comply with the plumbing code in NJ. There has to be shut off valves on it so the water can be shut off if it has to be worked on. This should be mentioned in the product specs. March 21, 2016
Rated 4 out of 5 by Love the diverter We recently remodeled the master bath and opted for a handheld shower and rain can in our walk-in shower. The diverter allows us to use either or both. Highly recommend a diverter when remodeling a bath with shower. May 3, 2013
Rated 5 out of 5 by Smooth Valve We coupled this with the Delta T11800 chrome trim package and the valve delivers good pressure and finger tip selection between our Delta 57014 Hand Shower Package and Delta T17230-H2O Classic Shower Trim Package with H2Okinetic, Independent Volume Control and Monitor Technologies. Was even surprised at the pressure delivered in the mix position supplying water to both shower heads. April 1, 2013
Rated 5 out of 5 by Great service. Way better than expected even I ordered few faucets for a remodel. Delivered quicker than expected. Had problem with one of them and still can't believe how quickly they took care of it. Thought I would wind up in internet no mans land. They emailed me back with 20 minutes and the replacement part was in the mail to me the same day. Received it two days later. September 14, 2014
Rated 5 out of 5 by Excellent Product Purchased as part of a shower remodel. All other components were Moen, but Moen did not have needed 6way diverter. This Delta product was recommended and works great.... May 8, 2011
Rated 5 out of 5 by Good valve Great Find. If you are looking for diverter valve this is the one you need. This thing is well priced and really solves your diverted issue. This one comes with a plug to cover one port. January 1, 2011
Rated 5 out of 5 by excellent choice This product comes in 3 or 6 way diverter types. We chose the 6 way. it works great. very smooth operation. precision machined piece where everything fit together snugly. April 19, 2011
  • 2016-06-29 T00:33:18.497-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_12, tr_12
  • loc_en_US, sid_R11000, prod, sort_default
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(53 Questions : 59 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

I am doing wall shower on right rain shower on top and wall shower on left . I am confused why do I have to cap right for three function

Customer avatar
by
gary
Cherry Hill, NJ, USA
if i ca right side as it says on the valve how do i install my hand shower on right>
Age: 45 to 54
Gender: Male
Project Type: New
Skill Level: Intermediate
4 days ago
Customer avatar
by
gary
Cherry Hill, NJ, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Gary,

Thank you for your question. You will only need to cap the right side of the valve if you will be using a 3-setting trim kit. For your set up, you will need to use a 6-setting trim kit and will not have to cap the valve.

Best Regards,
Courtney
1 day ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet12 is loaded.
Additional information about DeltaFaucet12 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

What valves do I need?

Customer avatar
by
Wayne
E Pennsylvania Ave, Downingtown, PA 19335, USA
I want to install a rain shower head and a separate hand/body wand. I want a volume control for each and a 3rd valve that regulates the temperature and regulates it from fluctuating like when a toilet is flushed or the washer is on. If possible pex fittings would be nice.
Topics: Purchase
Age: 65 or over
Gender: Male
Project Type: New
Skill Level: Intermediate
2 weeks, 6 days ago
Customer avatar
by
Wayne
E Pennsylvania Ave, Downingtown, PA 19335, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Wayne,

Thank you for your question. For the temperature and volume control you will need a 14, 17 (pressure balanced) or 17T (thermostatic) trim and an R10000 rough-in valve.

http://www.deltafaucet.com/bath/tub...

Unfortunately, we do not make individual in-wall volume controls. We would recommend to use a 3-Setting Diverter, which will allow you to divert the water from the raincan shower head, hand shower, or both. For this you will need a T118_ diverter trim that matches the control valve trim and an R11000 rough-in valve.

http://www.deltafaucet.com/search/r...

Best regards,
Jon
2 weeks, 5 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

I have delta 1100 devereter--I dont know what a 3 port 3 function deverter means. I need hot and cold balance for one shower head. Will this work?

Customer avatar
by
riggatony
Kelseyville, CA 95451, USA
Topics: Features
Age: 65 or over
Gender: Male
Project Type: New
Skill Level: Beginner
3 weeks, 6 days ago
Customer avatar
by
riggatony
Kelseyville, CA 95451, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Riggatony,

Thank you for your question. Delta diverter R11000 is used to divert between multiple products; shower head, hand shower, etc. What you're looking for is our R10000-UNBX valve. This controls the volume and temperature of the shower. I have included a link to this valve on our website below.
http://www.deltafaucet.com/bath/det...

Best Regards,
Courtney
3 weeks, 5 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet12 is loaded.
Additional information about DeltaFaucet12 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

do I need to use a high flow shower valve if 2 of my shower heads are 2.5 GPM and one is 2.0

Customer avatar
by
Scott
Everett, WA, USA
I plan to run 2 rain shower heads and a hand held shower. the rain showers are 2.5 GPM and the shower handle is 2.0 gpm. do I need to use a delta multichoice, shower only valve or can I use a standard R10000-un
Topics: Assembly
Age: 55 to 64
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Intermediate
1 month, 1 week ago
Customer avatar
by
Scott
Everett, WA, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Scott,

Thank you for your question. If this is going to be a shower only unit, I would highly recommend using the shower only valve R10000-UNBXHF.

Best Regards,
Courtney
1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet12 is loaded.
Additional information about DeltaFaucet12 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

I have shower head and a hand held shower so I would plug the right port on the valve correct?

Topics: Assembly
Skill Level: Advanced
2 months ago
Customer avatar
by
chris
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Chris, Thank you for your question!
Yes! When only using a 3 setting application the right port of the R11000 diverter valve has to be capped.

Best regards,
Brandis
2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
I have a R11000 diverter
Topics: Assembly
Age: 65 or over
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Beginner
2 months, 2 weeks ago
Customer avatar
by
Tom
Seattle
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Tom, Thank you for your question!
Yes, you can pipe each component to each port on the R11000 diverter rough in valve. Using all 3 ports will give you 6 settings.

Best regards,
Brandis
2 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

Would the valve operate if differently if the water was plumbed into one of the outlet ports?

Customer avatar
by
Cullen Meche
Lafayette
Topics: Assembly
Age: 35 to 44
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
2 months, 4 weeks ago
Customer avatar
by
Cullen Meche
Lafayette
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Cullen,

Thank you for your question. Unfortunately, the valve would not work correctly. Only the bottom port may be used as a water inlet.

Best regards,
Jon
2 months, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

Does the R11000 (or alternate) come with integral PEX fittings or do I just use adapters?

Topics: Assembly
Age: 55 to 64
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Beginner
2 months, 4 weeks ago
Customer avatar
by
Mike
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Mike, Thank you for your question!
You will have to purchase and install adapters when using PEX. They are not included with the R11000 diverter valve.

Best regards,
Brandis
2 months, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

3 separate functions for a 3 setting diverter?

Customer avatar
by
sarah
Colorado, USA
can a 3 way diverter be used for 3 separate units? For say a wall mount head, hand held wand and a rain head out of the cieling? Only functioning individually I presume? Would a six way allow for more than one to function at a time then?

Thank you
Topics: Assembly
3 months ago
Customer avatar
by
sarah
Colorado, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
HI Sarah, Thank you for your question!
The 3 setting cartridge only controls two components. Meaning both of the units would run by themselves and then both together. If you have a total of 3 components hooked up you would need the 6 setting cartridge. The 6 settings would run each item individually and then two shared at a time.

Best regards,
Brandis
3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta 3 / 6-Setting Diverter Rough
 
1 answer

Install rotated to right?

Would there be a problem if the R11000 is installed rotated 90 degrees, with the inlet on the left?
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Beginner
3 months, 1 week ago
Customer avatar
by
Puzzled
Montana
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Puzzled, Thank you for your question!
Yes, the valve can be installed and rotated 90 degrees. However, keep in mind the handle operation would be different.

Best regards,
Brandis
3 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
  • 2016-06-29 T00:35:42.138-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_R11000, prod, sort_default
2 3 next>>
  • 2016-06-29 T00:35:42.141-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_R11000, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.
  2. HGTV and HGTV Dream Home and their associated logos are trademarks of Scripps Networks, LLC. Used with permission; all rights reserved.