Delta Bath Waste Assembly
Just what I was looking for! Looks great in my new tub!
July 13, 2015
Nice quality with issues
The overall quality of the product is great but I have a few issues with it. The first issue is the beveled gasket is so thick that it cannot be tightened down on my tub to seal it. Between the surface of my tub and the overflow fitting is perfectly parallel and doesn't require a beveled gasket. I need a flat gasket or at least a beveled one that is one third as thick as the one provided in the kit. The second and most import issue is the overflow pipe is too short. The website shows a maximum of 13 1/2 inch max vertical adjustment. The website should explain the measurement can't be more than that from the drain to the top of the overflow hole. My new tub is not deep but it needs to be about two inches longer. The old original brass drain from the old steel tub is 14 1/2 inches long and the new delta is only 12 inches. It seems that for a kit costing over $100 dollars that there would be two overflow gaskets and a overflow tube that is a couple inches longer and could be cut to fit.
February 1, 2015