Leland TempAssure® 17T Series Shower Trim

Model #:T17T278-RB

What does this model number mean?

Finish Shown: Venetian® Bronze
TempAssure® 17T Series Shower Trim - T17T278-RB $566.15
MultiChoice(R) Universal Tub and Shower Valve Body - R10000-UNBX $47.75
List Price as
Shown (US $):1
$613.90
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Functional Options

Most of our showers allow you to change the shower function type to suit your needs (This will affect the Trim Model and List price on the left):

Product Features and Benefits

  • A charming teapot-inspired series of faucets for the entire home.
  • Timeless design is a perfect marriage of both form and function.
  • Thermostatic operation for precise temperature control.
  • Two function cartridge - lever controls volume and dial controls temperature
  • Order MultiChoice rough-in valve separately
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

  • Valve Type: Dual-function thermostatic cartridge
  • Flow Rate: 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa maximum water usage
  • Spray Settings: Full Body Spray

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Coordinating Items

Reviews

From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(4 Questions : 4 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Leland TempAssure® 17T Series Shower Trim
 
1 answer

do you have a 6way diverter trim to match this shower trim?

Age: 35 to 44
Gender: Male
Project Type: Replacement
4 days ago
Customer avatar
by
mcj
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi MCJ, Thank you for your question. The T11900-RB is the 6 setting 3 port diverter trim that matches the T17T238-RB shower trim. The diverter will allow you to control 3 separate devices like a showerhead, hand shower, and body sprays.
Thanks,
Dave
Skill Level: Advanced
3 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Leland TempAssure® 17T Series Shower Trim
 
1 answer

loss of water pressure

Customer avatar
by
Frank
Blomkest, MN, USA
Remodeled upstairs master bath with Leland 3578 MPU DST lavatory faucet and 17278 Shower fixtures. Originally specified and installed 3/4" hot and cold water pipes to this upstairs master bath to avoid loss of water pressure and volume, especially to the shower. We have had wonderful shower pressure and flow for many years until we installed your lavatory and shower fixtures listed above. Is there anything we can to bring back our shower water pressure and flow? Regards, Unhappy Customer Frank Christianson
Topics: Performance
Age: 65 or over
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Intermediate
2 months, 1 week ago
Customer avatar
by
Frank
Blomkest, MN, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Frank, We are sorry that you are experiencing a problem with your faucet. The model 3578-MPU-DST has a flow rate of 1.5 gallons per minute, most older faucets had a flow rate of 2.2 gpm which may account for the difference that you are seeing.
During the first few days you use your faucets, a small amount of debris may be flushed out of your pipe system. This happens even though the plumber flushes the pipes before completing work on your home. In addition, particles of solder, copper chips, Plumber's tape and other installation materials can get caught in aerators and shower heads. Occasionally, a chip might damage the valve seat that provides the watertight seal. The tips below will help you avoid problems. These procedures are a good idea to follow each time the water has been turned off for repairs in your home.

TO FLUSH A KITCHEN OR LAVATORY FAUCET:

Remove aerator and black sealing gasket above it

Turn faucet handle(s) to full on hot and cold mixed position(s) and flush lines for two minutes before turning off water with handle(s)

Replace aerator

TO FLUSH A TUB / SHOWER FAUCET:

Remove shower head if applicable

Turn handle(s) to full on hot and cold mixed position(s)

Flush spout two minutes without moving handle(s)

If you have a shower head, divert water to it and flush for two minutes. BE SAFE! Make sure cold water flows FIRST and that the rotational handle limit stop is properly set. See information on setting the adjustable limit stop. Also, watch this how to video for instructions on setting the adjustable limit stop.

Replace shower head

Some debris and/or foreign material in the lines may be too large to pass through the faucet whether it is a kitchen, lavatory or tub/shower faucet. To remove this type of debris:

Turn off water supply to both hot and cold.

Remove all internal components.

Turn water supplies back on and let run for 30-60 seconds. (For kitchen and lavatory faucets turn a bucket or similar large container upside down over faucet to deflect the water into the sink.)

Turn water supplies off again.

Reassemble faucet.

Turn water supplies back on.
Thanks,
Dave
Skill Level: Advanced
2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Leland TempAssure® 17T Series Shower Trim
 
1 answer

How do I tighten the handle on a T17 type faucet?

I find NO diagrams or help on the Delta or other sites and cannot get any access to the screws of the device to tighten!!
Topics: Care/Maintenance
User submitted photo
2 years, 4 months ago
Customer avatar
by
Ruthie
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1

Answers

Answer: 
Thank you for your question. Delta Faucet model # T17T278-RB has 2 handles included that sit on top of each other. There is a set screw on the bottom side of the volume handle that can be tightened down with a 3/32 allen wrench. The temperature handle is kept on with a screw running down the middle of it and then the temperature knob cover is put over the top of it to conceal the screw.
Skill Level: Advanced
2 years, 4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
Has staff answer
Has expert answer
Leland TempAssure® 17T Series Shower Trim
 
1 answer

Which rough in valve do I need?

Hello,

There are several rough in valves shown with the Leland TempAssure 17T shower. Which one do I need? What is the difference between the different rough in valves?

Thanks, Craig.
Topics: rough in valve
Age: 45 to 54
Gender: Male
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Beginner
2 years, 6 months ago
Customer avatar
by
Craig
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. When using Delta Faucet model # 17T278, there are choices for the rough in valve. The Delta Faucet R10000-UNBXHF is the one we would recommend. This is a high flow valve and it will produce the most gpm. The differences between the R10000 valves is a difference of piping that you are going to use. By ordering Delta Faucet model # R10000-UNBXHF, you can use either pex lines, copper lines, or iron pipe for your supply lines.
Skill Level: Advanced
2 years, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.