Victorian TempAssure&reg; 17T Series Tub and Shower Trim

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answer:

most rough in valves are compatible with the new trim styles...make sure you order the correct tub spout for copper...(should be available). There is normally a set screw underneath the spout to remove it.

Age: 35 to 44

Gender: Male

12 hours ago

ilovemyducks67

Roseburg, OR, USA

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

on Victorian TempAssure® 17T Series Tub and Shower Trim

Has staff answer

Has expert answer

Victorian TempAssure® 17T Series Tub and Shower Trim

1 answer

T17T455 vs T17455

Suzette

Virginia

Would you please give me the differences in these two models? I see there is a significant price difference and wondered how they differ. Is there an advantage of one over the other? Does one come with extra parts?
Thank you.

Topics: Purchase

Age: 65 or over

Gender: Female

Project Type: Replacement

Ownership: < 1 year

Skill Level: Beginner

1 month ago

Suzette

Virginia

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Hi Suzette,

There is in fact a big difference between the two. The T17455 is a regular monitor 1700 series. The T17T455 is from the same Victorian collection but with a thermostatic cartridge.

TempAssure Thermostatic valves monitor the temperature of the water and adjust the mix automatically to maintain precise temperature control and to keep the water temperature in your shower within a safe ±3° F (±1.6° C). This provides a more consistent temperature than pressure balanced valves can supply. TempAssure valves also feature an adjustable high-temperature limit stop that when properly set helps ensure the handle cannot be turned to a position that is too hot for comfort. And because TempAssure measures the temperature of water, the handle limit stop will not need to be adjusted for seasonal ground water temperature changes. This information can but found under the smart solutions tab. Once your there you can click on Tempassure tab.

Below is a link to this same information.
http://www.deltafaucet.com/smart-so...

1 month ago

DeltaJess

Indianapolis, IN, USA

+1point

1out of 1found this answer helpful.

Was this helpful?helpful1unhelpful0

on Victorian TempAssure® 17T Series Tub and Shower Trim

Has staff answer

Has expert answer

Victorian TempAssure® 17T Series Tub and Shower Trim

1 answer

Rough in valves

Suzette

Virginia

Is there one valve preferred over another to use with this? There are so many to choose from.

Topics: Purchase

Gender: Female

Project Type: New

Ownership: < 1 year

Skill Level: Beginner

1 month ago

Suzette

Virginia

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Hi Suzette,

The most common valve used with all shower faucets is the R10000-UNBX. This valve will allow you to utilize any kind of piping for the shower as well as the hot and cold inlets.

1 month ago

DeltaJess

Indianapolis, IN, USA

+1point

1out of 1found this answer helpful.

Was this helpful?helpful1unhelpful0

on Victorian TempAssure® 17T Series Tub and Shower Trim

Has staff answer

Has expert answer

Victorian TempAssure® 17T Series Tub and Shower Trim

1 answer

How do I adjust the Model #T17T455-SS so that I can get more hot water coming from it.

Allen

The water coming out of the Model #T17T455-SS tub/shower unit is not hot enough. The water is fine in the other parts of the house including the 2nd shower which does not have the Model #T17T455-SS. I want to know how to increase the hot water flow of this unit.

Gender: Male

Project Type: New

Ownership: 10+ years

Skill Level: Intermediate

5 months, 3 weeks ago

Allen

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your question. Delta Faucet model # T17T455-SS may need the rotational limit stop adjusted to allow more hot water to flow through the valve. Included here are the instructions on how to adjust the rotational limit stop. The directions are one page 8.

http://www.deltafaucet.com/customer...

Skill Level: Advanced

5 months, 3 weeks ago

Delta

Indianapolis, IN, USA

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

on Victorian TempAssure® 17T Series Tub and Shower Trim

Has staff answer

Has expert answer

Victorian TempAssure® 17T Series Tub and Shower Trim

2 answers

I need a handle for my faucet.

Sheila

Oklahoma

I don't know the model, the faucet was already installed when we purchased the house. The faucet looks victorian and has chrome and brass colors. I have a couple of other pictures if needed.

Topics: parts

11 months ago

Sheila

Oklahoma

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Number one contributor
Social Answering Subscriber

Answer:

you need to get an RP48310, RP50465, and an RP471498 from Delta

Age: 35 to 44

Gender: Male

11 months ago

ilovemyducks67

Roseburg, OR, USA

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Staff
Expert

Answer:

Thank you for your question. There are several parts that you may need for your complete handle. We have included the parts breakdown for Delta Faucet model # T17T455 here so you can decide exactly what parts you will need to purchase from your local wholesaler or retailer.

http://www.deltafaucet.com/customer...

Skill Level: Advanced

10 months ago

Delta1

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

on Victorian TempAssure® 17T Series Tub and Shower Trim

Has staff answer

Has expert answer

Victorian TempAssure® 17T Series Tub and Shower Trim

1 answer

Hi. I'd like to install the T17T455-RB (Victorian) and 57021-RB (Slide Bar Handshower)

Jericho, NY, USA

Can you please tell me:
1. Is this feasible?
2. If so, what three way Delta diverter (Venetian Bronze finish) would I need?
3. What Delta rough valve body would I need?

Thank you.

Topics: Assembly

Age: 35 to 44

Gender: Male

Project Type: Replacement

Ownership: < 1 year

Skill Level: Beginner

11 months ago

Jericho, NY, USA

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your questions. To complete the installion of Delta Faucet model # T17T455-RB and 57021-RB, you will need the following other parts: R10000-UNBX is the rough in valve. R11000 is the diverter valve. T11855-RB is the divertrer trim. 50560-RB is the wall elbow for the hand shower.

Skill Level: Advanced

11 months ago

Delta1

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0