- CA/VT Compliant
- Cleaning and Care
- Custom Showers
- Replacement Parts
- Shower Bases
- Sprayer Hose
- Toilets - Features
- Toilets - General
- Toilets - Installation
- Toilets - Service
- Touch2O Technology
- Water Filtration
- Water Pressure
- Water Temperature
Not if it was manufactured before January 1, 1995. Delta introduced the Lifetime Limited Warranty January 1, 1995. Before that, there was a two-year warranty. The longer warranty coverage is a result of significant improvements in finish technology, manufacturing tolerances and new models designed to provide an extended faucet life.
All parts and finishes of the Delta® shower base are warranted to the original consumer purchaser to be free from defects in material and workmanship for the time periods listed below. This warranty is extensive in that it covers replacement of all defective parts and even finish, but these are the only two things that are covered.
The Delta® Faucet Lifetime Limited Warranty is one of the most extensive in the industry. It covers manufacturer defects in faucet function as well as faucet finish, provided you are the original purchaser. Labor charges and/or damage incurred during installation, repair or replacement are excluded. Also excluded are repair parts resulting from normal wear and tear.
Our Lifetime Limited Warranty applies to Delta faucets manufactured after January 1, 1995.
This warranty applies to faucets for home use only. It excludes industrial, commercial and business use. Faucets used for these purposes are covered by a five-year limited warranty from date of purchase, with all other terms of the standard warranty applying.
Delta will replace your faucet with a new faucet if it is still under warranty and it can't be repaired with replacement parts. Our warranty covers replacement of any defective parts whether function or finish is the issue. If your faucet can be repaired with parts, then parts will be sent to you at no charge.
Customer Q & A
Ask your questions. Share your answers.
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
Avoid harsh abrasives or polishes
Avoid bleach-based cleaners
Read more: http://www.deltafaucet.com/customer...
Thank you for your question. It is not necessary to register your product to be covered by the warranty. The warranty applies to the original owner.
Once you detrermine which series you have, you will need to pick a trim staying within that series and you will need to keep your old catridge. The catridge that comes with your new trim will not fit your old valve.