Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Complete the look of your bath with this Lahara Pivoting Arm Toilet Tissue Holder. Delta makes installation a breeze for the weekend DIYer by including all mounting hardware and easy-to-understand installation instructions. You can install with confidence, knowing that Delta backs its bath hardware with a Lifetime Limited Warranty.
- Perfectly coordinates with the Lahara bath collection
- Extends 3-3/4 in. from wall
- Tile/masonry-plastic or lead anchors plaster/drywall-toggle bolts recommend if wood blocking is not available
- Mounting hardware and mounting template included with product
- Assembled dimensions: 2 in. H x 3-3/4 in. D x 8-3/4 in. W
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
2
Valve Type:
NA
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
AW from
Good quality
This matched our other fixtures in style and color well. It is heavy and well-constructed.
Date published: 2025-12-04
Rated 3 out of
5
by
NSabo from
Poor Design
The knob is too big to get a roll on the holder without emitting a lot of force. Due to that the arm attached to the wall pulls away and damages the wall. Also had the hinge on that bar break within 18 months of install.
Date published: 2025-07-29
Rated 5 out of
5
by
homeowner from
good service
service was helpful and got me the product I needed
Date published: 2024-11-18
Rated 2 out of
5
by
LB from
Toilet paper holder design flaw
It looks nice however it is somewhat difficult to pass the toilet paper tube over the hub at the end of the arm due to the prominent style. Would be helpful if it was an 1/8 or 1/4 inch smaller. We are very happy with the matching towel bars.
Date published: 2024-08-16
Rated 3 out of
5
by
Allis190 from
Nice but not long lasting.
My TP holder is about 5 years old. After about 4 years, the right side wall bracket and 'body' became loose and with the pivoting arm coming to rest on it, the weight eventually caused the body bracket to fall to the floor. This caused the plastic 'end cap' to break where the pivot arm rests. I glued it back together and kept using it. The right-side 'body' bracket became so loose again that it fell and broke the plastic again. The set screw was tightened each time, but was not catching on the wall bracket to keep it snug. I've repaired the plastic part of the 'body' bracket with plumbers tape and tightened the wall bracket, but the bracket and body mount do not fit snug even after tightening the set screw as much as possible. I've spent too much time trying to fix the plastic and mounting bracket and screw, and it's close to its 5 year warranty anyway. Not sure what I'll buy, as I have the entire matching Lahara collection in my bathroom.
Date published: 2024-06-10
Rated 1 out of
5
by
Jaj51 from
Fell off wall after 3 months use.
Fell off wall after 3 months use. Impossible to get back on. Very disappointed.
Date published: 2024-06-04
Rated 5 out of
5
by
Alesa from
Quality product!
Very pleased with this holder. It replaced one that was a much lesser quality and I couldn't be happier.
Date published: 2023-11-06
Rated 4 out of
5
by
Sue from
Hinged paper holder
Decent quality and works well.
Date published: 2023-09-08
Q&A
Is this a pivoting arm or a spring loaded rod
Delta's site says pivoting arm yet online retailers looks like spring loaded rod
Hi Bolivarspeck, Thank you for your question. All of the model 73850 tissue holders currently being manufactured are the pivoting arm version. Online retailers may still have spring loaded versions in stock.
Thanks,
Dave
Date published: 2024-03-28
What size hex wrench is needed for the set screws on the Delta Lahara (78350) pivoting toilet paper holder?
Hi, Donna!
Thank you for your question. The Delta 73850 tissue holder uses 5/64" Allen wrench.
Best Regards,
Rosanna
Date published: 2024-03-28
Where can we buy the mounting bracket? we have lost one, the part has 1321 stamped on the back of it. the holder is part 73850.
Thank you for your question. Unfortunately, the mounting bracket is not currently available separately.
Best regards, Jon
Date published: 2024-03-28
Has the pivoting arm design changed in recent years? Does just the bar that holds the paper flip up, or does the knob on the end come with it. In other words, are you slipping the paper roll over the thin bar or over the knob at the end of the bar?
Thank you for your question, Gene G! This toilet paper holder has been redesigned with a pivoting arm that flips up. The toilet paper roll will go over the knob at the end. If you have questions or need further assistance with this repair, please feel free to contact us directly.
Best regards, Edward
Date published: 2024-03-28
One of the reviewers stated that a roll of toilet paper would not fit on the pivoting arm. What is the diameter of the end of the arm?
Just had installer put this in. Can't find a diagram or instructions on how to use this thing. Arm does pivot, but toiler paper roll diameter does not easily fit over end of pivot arm. Extremely disappointed with this product. Not useable.
Date published: 2024-03-28
What is the size of the set screw that holds the tissue holder to the wall flange. I purchase three of these and each one is missing one of the set screws.
Hello PTG1,
Thank you for your question regarding the Delta Lahara® Tissue Holder and I am happy to assist you today.
The thread size for the set screw for this model is 8-32 x 3/8, Cone Point, Hex Socket.
If you could please refer to the email I sent to you or if you could give us a call at 800-345-3358, we will do our best to rectify this issue for you over the phone.
Thank you,
Brandy
Delta Faucet Company
Customer Service
Date published: 2024-03-28
Does the arm pivot up without the end post coming up? That's not evident in the online photo.
I have the other Lahara bath and light fixtures and love them. I need to see a picture of the arm up to make sure paper will slide onto arm.
Hi Marietheo, Thank you for your question. The end of the endpost for the Lahara paper holder is part of the pivoting arm that moves. I have attached a picture of the model 73850-RB below.
Thanks,
Dave
Date published: 2024-03-28
Size of pivoting arm?
In one of the reviews it was mentioned that a toilet paper roll doesn't fit over the end of the pivoting arm. Is this true or will a standard toilet paper roll slide over the end of the arm just fine? I don't know why a toilet paper holder would be made so that it is not convenient to change the toilet paper roll. Want to make sure before I purchase this item... Thanks!
Hi Sam, Thank you for your question. The size of the pivoting arm that that paper roll goes over on the model 738250-SS is 1-1/4".
Thanks,
Dave
Date published: 2024-03-28
FEATURED ACCESSORIES
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.