Monitor® 17 Series Tub & Shower Trim in Chrome

Hello Carlo, Most likely you are experiencing "shower-rise," where the water can’t get out of the spout as fast as it flows through the valve. This causes the water to back up and come out the shower head. There can be one of several reasons for this: 1. The valve could be upside down. 2. The length from the valve to the tub spout is outside of the 8" to 18" rule. 3. There is more than one 90-degree angle. 4. Something other than copper or galvanized pipe going to the spout was used. 5. The most common reason is that there is something restricting the water flow to the spout (for example, solder or something lodged in the pipe). Something is impeding the flow of water to the spout and causing it to back up and go out of the shower head. If this is the cause of shower-rise, it is possible to remove the blockage by removing the tub spout, and then feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. Please feel free to call, email, or message us on social if there s anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Thank you for your question. Delta Faucet model # T17451-RB has a showerhead that flows at 2.5 gpm at 80 psi. This is the only flow available for the showerhead.

Hi, Laura, Thank you for you question. We do have a push pop up bath waste assembly complete with an overflow cover to match the Champagne Bronze finish. The model number is RP693CZ. Here is the link for this on our website: https://www.deltafaucet.com/bathroom/product/RP693CZ Best Regards, Rosanna

Hi, Suzanne! Thank you for your question. The shower arm featured in the Vero Collection is part number RP46870SS. Here is a link to the shower arm: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46870SS Best Regards, Rosanna

Hi Maggie, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. The Delta Faucet Single-Setting Raincan Shower Head In Chrome MODEL#: RP62283 does not have a removable filter. It is possible that flushing the product could resolve this issue. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute. Please make sure that you are getting good flow through both the hot and cold sides while flushing. You can also shake the cartridge back and forth to make sure the back half of the cartridge rattles. This means that the pressure-balancing spool is moving freely, as it should. If you would like installation help, you may contact our residential warranty line directly at 800-345-3358 (prompt 2, then 4). We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. We also have how-to videos on our website and our YouTube channel. https://www.deltafaucet.com/service-parts/how-to-videos Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley