Temp2O™ is a new showerhead and handshower technology that allows you to set the water temperature to the precise degree you desire. Moments later, when you're under that glorious customized waterfall, the only surprise will be that you've run out of your favorite conditioner.
When you turn on the water, an LED screen in the showerhead or handshower alerts you to the current reading of the temperature sensor. Too hot or too cold? Move the handle to adjust the temp, keeping your eye on the screen. Stop when you reach water nirvana. If you prefer a more visual clue, check out the three-color indicator: A blue LED screen symbolizes that the water is below 80 degrees; magenta means it’s between 80 and 110; red indicates the water is higher than 110 degrees.
Temp2O™ showerheads come with six spray settings, including massage, shampoo and drenching. The showerhead, as well as the handheld, uses only two gallons of water per minute, which is a 20 percent savings over most standard models, says Megan Stacker, a Delta Faucet associate product manager. It’s good for your budget and Mother Earth!
Nope, not even one. The temperature sensor is powered by the water running through it. As soon as you turn the water on, the LED screen starts functioning; as soon as you turn the water off, it shuts down. This isn’t low maintenance—this is no maintenance!
Not unless you’re inviting him or her over for dinner. This is a job you can handle: To install a Temp2O™ model, simply unscrew your current showerhead (or handheld) and screw the new one into place.