Traditional Wall Mount Pot Filler Faucet - Traditional

Model #:1177LF

What does this model number mean?

List Price as
Shown (US $):1
$414.95
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • Dual shut off on the Delta Pot Filler faucet allows the user to turn the water off at either the wall or the spout, controlling the water flow at the point of use
  • 24 in. dual swing joints allow the pot filler to easily fold away when not in use
  • With a 4 gpm flow rate, the Delta Pot Filler faucet makes it quick and easy to fill pots for cooking
  • Simple on and off with a quarter turn of the handle
  • Meets standards set by Americans with Disabilities Act (ADA)
  • Single hole installation
  • Assembled dimensions: 8-17/32 in. H x 26-31/32 in. D x 2-3/8 in. W
  • Lifetime Faucet and Finish Warranty
  • Featured Smart Features:

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Installation Information

Single hole installation
  • Number of Handles: 2
  • Tall/High-Arc: No
  • Pull-out/Pull-down: No
  • With Side Sprayer: No
  • With Soap/Lotion Dispenser: No
  • Aerator Type: Cache
  • Valve Type: Ceramic valve
  • Holes/Width: Single hole installation
  • Spout Length: 23-5/8″
  • Spout Total Height: 7-7/32″
  • Spout Height Deck to Aerator: 3-5/32″

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Reviews

Rated 4.4 out of 5 by 5 reviewers.
Rated 2 out of 5 by Average Product I had have this faucet installed 3 months ago. This faucet looks really nice in our newly remodeled kitchen. It also worked great during the first two months. My wife recently noticed that one of the two locks has stopped working. The faucet doesn't leak but the second lock which prevents any accidents has stopped working. I am surprised that such a nice and costly product has such a short shelf life. I don't know if there is any solution to fix this problem!!! October 23, 2015
Rated 5 out of 5 by Excellent Product My contractor actually convinced us to install a pot filler when we renovated last year. I did not know what a pot filler was. Since installing, I don't know how I cooked without one. It is absolutely great! Just wished my contractor had been better at placement on the wall. It is a little too low. June 13, 2012
Rated 5 out of 5 by Delta Makes Great Products I love the quality of this beautiful faucet. It is substantial, smooth, and a real looker. It was expensive, and a bit of a splurge for my remodel, but it does add alot of convenience. My contractor installed it relatively quickly, and he was impressed as well. June 4, 2015
Rated 5 out of 5 by Great Item I was very excited when my contractor suggested a pot filler. We moved the sink from the right of the stove to an island and so a pot filler makes the task easier plus I can fill out coffee maker from the pot filler. There number of styles were limited January 26, 2016
Rated 5 out of 5 by It's perfect! This pot filler is ah-mazing! Heavy duty feel, looks fantastic, great water flow. Easily reaches anywhere on my cooktop. I could not be happier with my purchase. Everyone who comes over comments on how cool it is! I love it! March 23, 2014
  • 2016-04-29 T00:30:31.204-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_1177LF, prod, sort_default
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(16 Questions : 16 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Topics: Assembly
Age: 45 to 54
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
2 weeks, 2 days ago
Customer avatar
by
Dennis
Utah, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Dennis,

Thank you for your question. In the fully extended or folded (parallel with the wall) position, the spout end will be centered with the supply nipple.

Best regards,
Jon
2 weeks, 1 day ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

Upside down

Is it possible to install this upside down? I want the supply pipe at the top and the spigot on the bottom.
Topics: Assembly, Features
2 months, 4 weeks ago
Customer avatar
by
Tom
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Tom,

Thank you for your question! Unfortunately, this faucet cannot be installed upside down.

Best regards,
Jon
2 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

What is the total width of this product when it is folded up?

Topics: Features
Age: 25 to 34
Gender: Female
Project Type: New
1 month, 2 weeks ago
Customer avatar
by
Chris
Houston, TX, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Chris,

Thank you for your question. The faucet body is 14" wide when parallel with the wall. When the handle is turned outward, the total width is 16".

Technical Specifications:
http://www.deltafaucet.com/customer...

Best regards,
Jon
1 month, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

What sink faucet system best matches the traditioinal wall mount pot filler?

Topics: appearance
Gender: Female
3 months, 3 weeks ago
Customer avatar
by
Catherine
Crete, IL, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Catherine,

Thank you for your question! Since the Pot Filler is not part of a specific design collection, any of our Traditional style faucets will match some of the design aspects. Please click the link below to browse our selection of kitchen faucets with a Traditional design style.

http://www.deltafaucet.com/kitchen/...

Best regards,
Jon
3 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

Inverted nstall possible?

Is it possible to install "inverted" like this picture? The delta spout would of course be rotated 180 degrees. This would make sure the first arm could clear even the ttallest pot that may be next to the wall while filling a pot on the front side of the stove.
Topics: Assembly, Features
3 months, 3 weeks ago
Customer avatar
by
Eric
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Eric,

Thank you for your question. Both arms can be rotated over 180 degrees, so the spout can be positioned on the right or left. I hope this answers your question!

Best regards,
Jon
3 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

Is this pot filler all metal or are there some plastic parts?

3 months, 3 weeks ago
Customer avatar
by
Lisa
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Lisa,

Thank you for your question. This product is primarily metal, with a few non-metallic components.

Best regards,
Jon
3 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

What is the measurement from the center of wall nipple to bottom of faucet?

I am setting the plumbing and want the bottom of the faucet to be 14" above the deck. Need to know exactly where to stub out the nipple. Thank you
Topics: installation
Age: 55 to 64
Gender: Male
Project Type: New
Ownership: < 1 year
Skill Level: Intermediate
11 months ago
Customer avatar
by
Rick
Orlando, FL, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Rick, Thank you for your question. The distance from the bottom of the faucet to the center of the pipe nipple is 3.12".
Thanks,
Dave
Skill Level: Advanced
11 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

What is the difference between the Arctic Stainless and the Stainless finishes?

Which will go better with my stainless appliances?
Topics: Features
1 year ago
Customer avatar
by
Kathie
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Kathie, Thank you for your question. The Arctic stainless (AR) has a blue tint to the finish which coordinates with many of todays appliances. The Brilliance stainless (SS) has a gold tint to the finish, it is similar to brushed nickel finishes.
Thanks,
Dave
Skill Level: Advanced
1 year ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

AB1953 certified?

Is this pot filler ASTM AB1953 certified, and if so, can you please provide the Massachusetts approval code? Thank you.
Topics: compliance
1 year, 2 months ago
Customer avatar
by
Erica
MA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Erica, Thank you for your question. Attached is the spec sheet for the model 1177LF that covers the lead free legislation compliance and a link to the Massachusets product approval website for this product..
http://www.deltafaucet.com/customer...
http://license.reg.state.ma.us/pubL...
Thanks,
Dave
Skill Level: Advanced
1 year, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Traditional Wall Mount Pot Filler Faucet - Traditional
 
1 answer

Is this unit made from Brass & ok to use with an RO system?

Can this be hooked up to an Reverse Osmosis water filter?

I have seen other manufacturers not recommend using their pot fillers with RO water because it does not interact well with the brass insides of the fixtures.
Topics: Warranty, Performance, Care/Maintenance
Age: 35 to 44
Gender: Male
Project Type: New
Ownership: 2-5 years
Skill Level: Intermediate
1 year, 1 month ago
Customer avatar
by
sjhanksaz
AZ
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi sjhanksaz, Thank you for your question. We would not recommend using an RO system with our model 1177LF-SS pot filler for the reasons stated in your question.
Thanks,
Dave
Skill Level: Advanced
1 year, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-04-29 T00:30:15.411-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_1177LF, prod, sort_default
2 next>>
  • 2016-04-29 T00:30:15.433-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_1177LF, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.