Lakeview® Pull-Down Kitchen Faucet with Soap Dispenser

Model #:59963-RBSD-DST

What does this model number mean?

Finish Shown: Venetian® Bronze
List Price as
Shown (US $):1
$410.00
Exclusively available at Home Depot.

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • MagnaTite docking keeps the kitchen pull-down spray wand firmly in place with a powerful integrated magnet, so it stays docked when not in use
  • DIAMOND Seal Technology features a valve embedded with diamonds to ensure like-new operation for the life of the faucet
  • Includes matching finish soap dispenser
  • Meets standards set by Americans with Disabilities Act
  • 2 or 3-hole 4″ installation
  • High-arc pull-down swivels 360° for complete sink access
  • 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Installation Information

2 or 3-hole 4″ installation
  • Number of Handles: 1
  • Tall/High-Arc: Yes
  • Pull-out/Pull-down: Yes
  • With Side Sprayer: No
  • With Soap/Lotion Dispenser: Yes
  • Valve Type: DIAMOND(TM) Seal Valve
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Holes/Width: 2 or 3-hole 4″ installation

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Reviews

From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(5 Questions : 6 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

Can you please tell me what the height of this faucet is, at the highest point of the arc?

I'm trying to determine if I have room under an above-sink shelf.
Topics: dimensions
Age: 45 to 54
Gender: Female
Project Type: Replacement
Skill Level: Beginner
4 weeks, 2 days ago
Customer avatar
by
CeCe
Asheville, NC
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi CeCe,

Thank you for your question! The faucet is 15 5/16" at its highest point. Below is a link to the Technical Specifications for this unit.

http://www.deltafaucet.com/customer...

Best regards,
Jon
4 weeks, 1 day ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

need flange for sink drain and garbage disposal & add'l soap dispenser

I am considering purchasing the Lakeview Pull Down Faucet with Soap Dispenser and would like to know the availability of coordinating parts. I am looking to replace the 3 1/2" flange for the sink and the 3 1/2 " flange for the garbage disposal in addition to another soap dispenser all in the coordinating "Venetian Bronze". Can you tell me where to purchase these parts since this is part of the Home Depot only collection along with the item/part numbers. Additionally, is it customary to change the flanges to match a new faucet?
Topics: coordinating items
Age: 55 to 64
Gender: Female
Project Type: New
4 months, 3 weeks ago
Customer avatar
by
pamb
Boynton Beach, FL, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello Pamb,

Thanks for your question. Unfortunately, the only flange for a kitchen sink and garbage disposal that we make is 4 and 1/2" in diameter. The part number for the soap dispenser is RP50781RB.
4 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet4 is loaded.
Additional information about DeltaFaucet4 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
2 answers

I want to replace a discontinued Michael Graves collection faucet with the Lakeview, will it work?

I currently have the Graves Single-handle Kitchen Faucet installed with a four hole installation, 4" centers. I replaced the soap/lotion dispenser with a RO water filter tap so for the faucet I am only using 3 holes (faucet, control handle, sprayer). Can I install this faucet in those three holes? Replacing the sprayer with the soap dispenser that comes with this set. Are all holes drilled to the same diameter?
Topics: Assembly
User submitted photo
1 year, 6 months ago
Customer avatar
by
Mike
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Mike, Thank you for your question. The recommended hole size for your existing model 1487-SSWF and the new 59963-SSSD-DST are both 1-3/8" diameter. You should be able to install the Lakeview in the existing 3 holes.
Thanks,
Dave
Skill Level: Advanced
1 year, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
You should be able to use this Delta faucet. I too have four holes in my counter top. I kept the soap dispenser from my old unit and now have two soap dispensers. They don't match in design but both have the stainless steel finish. It is fairly insignificant. I think it looks better than plugging one of the wholes. Good luck.
10 months ago
Customer avatar
by
Georgia
Read all my Q&A
 
Please wait while more information about Mykal is loaded.
Additional information about Mykal could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

can the Lakeview be installed with spacing other than 4 inch centers?

Customer avatar
by
Lee
313 Hidden Creek Circle, Spartanburg, SC 29306, USA
I have had in past one center hole for main faucet w integrated control lever --- second hole is 7.5 inches on center to the right of the main faucet hole and was for a hand held spray , soap dispenser is way to the left 18 inches from center faucet hole

so I need 3 "components" for the 3 holes but was not sure if the main faucet and control lever for the Lakeview have to be 4 inches on centr apart or can they be spaced further apart?? - assume soap dispenser is separate and not critical on spacing?
Age: 55 to 64
Gender: Male
1 year, 7 months ago
Customer avatar
by
Lee
313 Hidden Creek Circle, Spartanburg, SC 29306, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Lee, Thank you for your question. The spout and valve on the model 59963-SSSD-DST can be placed further apart. However the wider the spread the shorter the length of the pull down sprayer.
Thanks,
Dave
Skill Level: Advanced
1 year, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

Hole Spacing for this product

I'd like to confirm that this item will fit in a 3 hole 4" spacing. The product page says it will, but when I look at the tech specs, the diameters are so large, I don't see how it could possibly fit.
Topics: fitment
2 years, 6 months ago
Customer avatar
by
kk5zc
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Kk5zc,

Thank you for your interest in Delta Faucet Company products. The model 59963-SSSD-DST is installed on 4" centers.
2 years, 5 months ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about JessW is loaded.
Additional information about JessW could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-02-07 T03:14:06.245-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_59963-RBSD-DST, prod, sort_default
1 of 1
  • 2016-02-07 T03:14:06.247-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_59963-RBSD-DST, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.