Lakeview Pull-Down Kitchen Faucet with Soap Dispenser

Model #:59963-SSSD-DST

What does this model number mean?

Finish Shown: Stainless
List Price as
Shown (US $):1
$363.35
Exclusively available at Home Depot.

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • An updated version of details inspired by antique fixtures
  • High-arc spout swivels 360° for complete sink access
  • High arc spout provides extra clearance for deep pots and pans
  • MagnaTite docking system secures sprayer to spout
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Installation Information

2 or 3-hole 4″ installation
  • Number of Handles: 1
  • Tall/High-Arc: Yes
  • Pull-out/Pull-down: Yes
  • With Side Sprayer: No
  • With Soap/Lotion Dispenser: Yes
  • Valve Type: DIAMOND(TM) Seal Valve
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Holes/Width: 2 or 3-hole 4″ installation

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Coordinating Items

Reviews

Lakeview Pull-Down Kitchen Faucet with Soap Dispenser 4 5 5 5
Faucet has quality and style We have nothing but Delta faucets. When we remodeled, we changed from a chrome Delta faucet to a stainless finish Delta faucet. This faucet combines beauty and elegance with dependability, quality, and performance. The Magna Tite docking sprayer is easy to pull out and easy to retract. You are able to reach all areas of the sink. The faucet has 2 different water spray choices. We bought an extra soap dispenser, since our sink was bored for 4 holes and we use one for hand soap and one for dish soap. The finish does not show fingerprints. I would highly recommend this faucet to anyone. November 4, 2013
Poor water temperature blending Out of all the single lever faucets I've used, I've never used one with such a small "zone" for warm water. When I turn on the water straight up the middle sometimes it’s very hot and other times it's barely warm. Once the water is on it only takes the slightest adjustment to go from all hot to all cold. To state the issue in a different way, out of the total travel, cold 0% to hot 100%, the water temperature is all cold from 0%-44% warm/blended from 45% to 55% and all hot from 56% to 100%. October 24, 2013
This product is good looking This product is good looking, and we like it overall, but when we turn it off it continues to drip sometimes and we need to watch it to be sure it is off all of the way. Sometimes we need to turn it back on and off again. It is a good looking faucet and we like the finish. We also like the high arc design. This is our first soap dispenser, and we like it. May 5, 2013
Very easy to install, very good design. attractive on the sink The is a very well designed product. it functions great, looks great and was very simple to install. It was actually more difficult to remove the old unit than it was to install this new one. January 25, 2014
Great Faucet This is an excellent faucet, both function and style. One of the best faucets I have purchased. Also, the customer service at Delta is excellent. January 15, 2014
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(3 Questions : 3 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

I want to replace a discontinued Michael Graves collection faucet with the Lakeview, will it work?

I currently have the Graves Single-handle Kitchen Faucet installed with a four hole installation, 4" centers. I replaced the soap/lotion dispenser with a RO water filter tap so for the faucet I am only using 3 holes (faucet, control handle, sprayer). Can I install this faucet in those three holes? Replacing the sprayer with the soap dispenser that comes with this set. Are all holes drilled to the same diameter?
Topics: Assembly
User submitted photo
4 weeks ago
Customer avatar
by
Mike
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Mike, Thank you for your question. The recommended hole size for your existing model 1487-SSWF and the new 59963-SSSD-DST are both 1-3/8" diameter. You should be able to install the Lakeview in the existing 3 holes.
Thanks,
Dave
Skill Level: Advanced
3 weeks, 6 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

can the Lakeview be installed with spacing other than 4 inch centers?

Customer avatar
by
Lee
313 Hidden Creek Circle, Spartanburg, SC 29306, USA
I have had in past one center hole for main faucet w integrated control lever --- second hole is 7.5 inches on center to the right of the main faucet hole and was for a hand held spray , soap dispenser is way to the left 18 inches from center faucet hole

so I need 3 "components" for the 3 holes but was not sure if the main faucet and control lever for the Lakeview have to be 4 inches on centr apart or can they be spaced further apart?? - assume soap dispenser is separate and not critical on spacing?
Age: 55 to 64
Gender: Male
1 month, 3 weeks ago
Customer avatar
by
Lee
313 Hidden Creek Circle, Spartanburg, SC 29306, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Lee, Thank you for your question. The spout and valve on the model 59963-SSSD-DST can be placed further apart. However the wider the spread the shorter the length of the pull down sprayer.
Thanks,
Dave
Skill Level: Advanced
1 month, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Lakeview Pull-Down Kitchen Faucet with Soap Dispenser
 
1 answer

Hole Spacing for this product

I'd like to confirm that this item will fit in a 3 hole 4" spacing. The product page says it will, but when I look at the tech specs, the diameters are so large, I don't see how it could possibly fit.
Topics: fitment
1 year ago
Customer avatar
by
kk5zc
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Kk5zc,

Thank you for your interest in Delta Faucet Company products. The model 59963-SSSD-DST is installed on 4" centers.
1 year ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about JessW is loaded.
Additional information about JessW could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.