Fuse Single Handle Pull-Down Kitchen Faucet

Model #:9158-SB-DST

What does this model number mean?

List Price as
Shown (US $):1
$476.10
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • MagnaTite docking keeps the kitchen pull-down spray wand firmly in place with a powerful integrated magnet, so it stays docked when not in use
  • EZ AnchorTM mounting assembly allows the faucet to be installed from above the sink
  • DIAMOND Seal Technology features a valve embedded with diamonds to ensure like-new operation for the life of the faucet
  • Meets standards set by Americans with Disabilities Act
  • Touch-Clean spray holes allow for easy removal of hard water build-up
  • 1 or 3-hole 8″ installation
  • For three hole, 8 in. installation, order optional escutcheon RP64472SS
  • High-arc pull-down swivels 360°
  • 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Installation Information

1 or 3-hole 8″ installation
  • Number of Handles: 1
  • Tall/High-Arc: Yes
  • Pull-out/Pull-down: Yes
  • With Side Sprayer: No
  • With Soap/Lotion Dispenser: No
  • Aerator Type: Cache
  • Valve Type: DIAMOND(TM) Seal Valve
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Holes/Width: 1 or 3-hole 8″ installation
  • Spout Length: 9″
  • Spout Total Height: 16″
  • Spout Height Deck to Aerator: 9″

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Coordinating Items

Reviews

Fuse Single Handle Pull-Down Kitchen Faucet 4.9 5 12 12
I love this faucet This faucet goes great with stainless and black appliances. I like the way the pull out fits in the spout it is sleek and stylish. This faucet is great with granite counter tops but would also look nice on a stainless steele self rimed sink.. Thank you Delta. June 14, 2012
The best faucet design and look It is so sleek looking, A perfect design to those who are sick and tired of all this stainless steel garbage like me. I had new Corian countertops installed and this was a perfect match with my new stove which is black and stainless steel and is located on the same wall as the sink. I looked on internet, all the major stores until I couldn't any more. This was the perfect look I wanted. I did have a concern about a slow drip, put I contacted customer service they sent a new part out immediately. I have a disability and the handle is a breeze to operate. February 28, 2015
Good looking--works well This faucet look very well in our kitchen; works well and adds class to the kitchen. March 5, 2013
Colors work Upon first seeing the color options, I was hesitant about this faucet. Just got back pics from a plumber that installed this in red. Faucet actually looks great!! All the reports back for ease of installation and performance have been very positive. November 16, 2012
Contemporary yet functional Luv this cool styled faucet with Delta quality and function. Worth the extra $$$$$ February 12, 2013
So happy I purchased this faucet! I love this faucet !! I have to say it took me a long time to pick this one out and I wasn't sure if I should spend the money at the time because our original faucet wasn't that old, but I decided with the new black anthracite sink, I really thought this faucet would pair perfectly with it. I am so glad about my decision. This faucet has a nice pull down sprayer that switches between a shower or straight stream. My husband likes the shower and I like the straight stream so we use both options all the time. We are very happy with this purchase and the ease of installation. Our sink has a single hole with just this faucet/sprayer implemented, and I love the beautifully streamlined look and the very functional usage. February 9, 2015
Beautiful and functional I bought this a month ago and I love it. It looks great and works very well. Love the pull down feature! May 13, 2014
Great style and performance I love my new Delta Pull-Down Faucet. This was purchased for my craft room and I was looking for something to go with my white cabinets. This one is perfect for style and looks and the quality of product is excellent! Can't wait until I redo my kitchen and install Delta's sensor faucet! My handyman said this was the easiest faucet install he has ever done. May 6, 2014
  • 2015-05-21T06:22:31.190-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_12, tr_12
  • loc_en_US, sid_9158-SB-DST, prod, sort_default
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(8 Questions : 11 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
1 answer

Can the faucet be mounted with the handle on the left?

I have a Delta faucet with the handle above the spout. I am noticing that I turn it on with either hand but more often with my left while holding an item in my right hand.
Topics: Assembly
Age: 65 or over
Gender: Female
Project Type: Replacement
2 weeks, 5 days ago
Customer avatar
by
Sculptress
VT
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Sculptress, Thank you for your question. The spout on the 9158-SB-DST swivels a full 360°. The handle can be placed to the left side. To make the faucet lever work with cold to the front and hot to the rear you would also need to switch the supply lines under the sink. The temperatures will be reversed if you do not.
Thanks,
Dave
Skill Level: Advanced
2 weeks, 5 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
1 answer

Finish material

Which finish material on the 1977 AR DST would match the fuse faucet the best.
Topics: Features
9 months ago
Customer avatar
by
Teknorpi
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Teknorpi, Thank you for your question. The model 1977-SS-DST will match the stainless finish on the 9158-SW-DST faucet.
Thanks,
Dave
Skill Level: Advanced
9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
2 answers

Tightening the Base

The faucet is all hooked up and it is working perfectly.
The only problem is that the base is loose and is turning back and forth.
What is the best way to tighten this without having to disconnect everything?
Thanks,
Stephen
1 year, 3 months ago
Customer avatar
by
Stephen
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Stephen, Thank you for your question. There are two different steps when installing the model 9158-SW-DST with the EZ anchor mounting system that would affect how tight the faucet is to the deck. The first step would be to shut off the water, remove the sprayer assembly, hose, spout, and spout retainer. You can then tighten the hub to the deck by threading the EZ bar through the holes on the brass piece on top of the hub and turning clockwise. If your faucet is still loose at this point, you will have to tighten the EZ anchor assembly which would involve removing the entire faucet as this is the first step in the installation process. I have attached the link to the owners manual for your faucet model and a How to video on the EZ anchor installation below to help you with your repair.
Thanks,
Dave
http://www.deltafaucet.com/customer...
http://www.deltafaucet.com/shopping...
Skill Level: Advanced
1 year, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
This faucet is anchored by the EZ anchor, the black plastic mount that was installed first. You might be able to tighten that mount without having to disconnect everything. Basically, you'll need to pull off the spout to expose the faucet, then lay the spout off to the side. Next, with a crescent wrench, loosen the brass assembly and lift it off the EZ anchor. Next, you'll see two anchor screws, these will need to be re-tightened. The directions say to use a cordless screwdriver, which I did.
These steps should enable you to re-tighten the base without having to disconnect everything.
Age: 45 to 54
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Advanced
1 year, 1 month ago
Customer avatar
by
South Haven, MI, USA
Read all my Q&A
 
Please wait while more information about JimCon is loaded.
Additional information about JimCon could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
1 answer

I recently ordered the Fuse in Stainless and Snowflake and want to order the Escutcheon. Which finish best matches the stainless finish of the faucet?

Customer avatar
by
Barry
Middlebury, IN 46540, USA
Topics: Purchase
Age: 45 to 54
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Intermediate
1 year, 8 months ago
Customer avatar
by
Barry
Middlebury, IN 46540, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Barry,

To match your Delta Faucet model # 9158-SW-DST, we recommend ordering the escutcheon model # RP47274SS.

Thanks.

Jody
Skill Level: Advanced
1 year, 8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
1 answer

what shade is the red fuse faucet

On your site in some photos the fuse red appears to have a slightly orange tint while in others it appears more maroon. What is the actual color?
Topics: Purchase, Features
2 years, 2 months ago
Customer avatar
by
Gab
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # 9158-SB-DST is chili red. It is not orange.
Skill Level: Advanced
2 years, 2 months ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
1 answer

Will the fuse come in with touch h2o feature?

Topics: Features
2 years, 4 months ago
Customer avatar
by
Judi
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. The Fuse kitchen faucet is not available with a touch feature at this time. We will make this suggestion to our R & D department.
Skill Level: Advanced
2 years, 4 months ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
2 answers

Does the spout just snap on to the hub of the 9158-SB-DST

I see a button on the spout but I do not see anything to line it up with.
Topics: Assembly
Project Type: Replacement
Ownership: < 1 year
Skill Level: Advanced
2 years, 6 months ago
Customer avatar
by
jc
Oklahoma City, OK
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # 9158-SB-DST has a button in the back that should line up with the back of the hub.
Skill Level: Advanced
2 years, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Yes it snaps right back the button is for the sprayer function.
Age: 65 or over
Gender: Female
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
2 months, 3 weeks ago
Customer avatar
by
Spanaway, WA, USA
Read all my Q&A
 
Please wait while more information about outwest is loaded.
Additional information about outwest could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Fuse Single Handle Pull-Down Kitchen Faucet
 
2 answers

Fuse Material question

Are the colored areas of the Fuse Faucet plastic or metal? Is there a possibility that the color would fade or change if faucet is placed in an area that receives direct sunlight (i.e. under the kitchen window). Thank you for your time.
Topics: Features
Age: 35 to 44
Gender: Female
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
3 years ago
Customer avatar
by
Erin
Newnan, GA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
It's more like a composite plastic. Delta would know about that than me.
Age: 45 to 54
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Advanced
1 year, 1 month ago
Customer avatar
by
South Haven, MI, USA
Read all my Q&A
 
Please wait while more information about JimCon is loaded.
Additional information about JimCon could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Thank you for your question. Delta Faucet model # 9158-SW-DST has colored areas which are made of metal. Regarding the fading question, if this is put in direct sunlight for a prolonged period of time, just like most materials, it will fade. We do not know the extent that it will fade.
Skill Level: Advanced
3 years ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
  • 2015-05-21T06:27:40.561-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_9158-SB-DST, prod, sort_default
1 of 1
  • 2015-05-21T06:27:40.565-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_9158-SB-DST, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.