Trinsic Single Handle Pull-Down Kitchen Faucet

Model #:9159-DST

What does this model number mean?

List Price as
Shown (US $):1
$360.55
Where to Buy

Own this product?

Registering it helps us provide the best service.

Want to save this product so you can quickly find it later?

You own this product.

I don't own this product

Need help with your product?

Troubleshoot Your Issue

Product Features and Benefits

  • MagnaTite docking keeps the kitchen pull-down spray wand firmly in place with a powerful integrated magnet, so it stays docked when not in use
  • DIAMOND Seal Technology features a valve embedded with diamonds to ensure like-new operation for the life of the faucet
  • Meets standards set by Americans with Disabilities Act
  • Touch-Clean spray holes allow for easy removal of hard water build-up
  • 1 or 3-hole installation
  • High-arc pull-down swivels 360° for complete sink access
  • Pull-down wand operates in an aerated or spray mode via ergonomic buttons
  • 54 in. long hose provides outstanding reach
  • For three hole installation, order optional escutcheon RP64070
  • 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Lifetime Faucet and Finish Warranty

Product Support, Repair Parts & Tech Specs

Installation Information

1 or 3-hole 8″ installation
  • Number of Handles: 1
  • Tall/High-Arc: Yes
  • Pull-out/Pull-down: Yes
  • With Side Sprayer: No
  • With Soap/Lotion Dispenser: No
  • Valve Type: DIAMOND(TM) Seal Valve
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Hose Length: 54
  • Holes/Width: 1 or 3-hole 8″ installation
  • Spout Length: 9-1/2″
  • Spout Total Height: 15-3/4″
  • Spout Height Deck to Aerator: 8-3/8″

Troubleshooting Resources

Troubleshoot Your Faucet

Frequently Asked Questions

General Faucet Installation Instructions

Coordinating Items

Reviews

Trinsic Single Handle Pull-Down Kitchen Faucet 4.5 5 10 10
Perfect, beautiful, easy to install As a woman, I picked out a faucet based on how well the sprayer would go back into the faucet without it hanging out later on, when it starts to wear out. Never did I think it would be as easy as it was to install. I thought perhaps I would have to hire someone, but with a little bit of reading of the directions and the ease in which to hook up the water lines, as well as installing the actual faucet, it was a snap for even I to do. Took me no time at all and it was perfect. December 6, 2013
Uncomfortable but it looks pretty I can't believe all the positive reviews on the design, it is uncomfortable to turn off or on, when your hands are wet you will bring water to the counter stone as you turn off the water. Bad ergonomic design but looks pretty. December 26, 2014
Best kitchen faucet I have ever owned There not much to say when it's the best kitchen faucet I have ever owned. Functionality and style stand out above all others as does quality of the product. June 25, 2014
Great faucet. I love this faucet so far. It is beautiful and was easy to install. I like that you can change from spray to stream without turning the water off. Plus, when you get your water temp right, it stays there until you move it. April 28, 2014
Delta Faucet 9159-DST This is a large faucet, suitable for a kitchen with a medium to large sink. Installation is simple. Moving parts are smooth and tight, Magnetic lock for pull down works well. Finish is flawless. Excellent faucet, July 27, 2011
Great value We've been living with this faucet in our remodeled kitchen for 2 months now and are very pleased. I was initially concerned that the pulldown spray head is plastic (I'm still hoping it doesn't turn into a problem with longevity; remains to be seen), but it works great and may be heavier/more unwieldy if it were made of metal. LOVE the magnetic locking feature, so there's never a dangling spray head, and it seats in easily when you retract it. I like how smoothly and far it pulls out, but the downside to that is that it can get tangled in the plumbing or other items you may happen to have under your sink. (That extra length of hose doesn't magically retract into thin air.) I can have a pot or pitcher on the countertop flanking a standard size sink and it easily reaches to fill it. The spray easily switches back and forth from stream to spray and does not automatically revert to stream when you turn the water off, which is what I wanted. I can also easily use my wrist to turn the water off/on when I have messy hands. The height is slightly shorter than similar models from other brands; also what I wanted, and a great value for the price. One thing that should be pointed out is that this model does NOT have a brushed base like is shown in the picture; the whole unit is polished chrome. December 14, 2014
wasn't my first choice I had been looking for a faucet that was more user friendly than my prior one. But I had in my mind I still wanted something similar. My previous faucet had a straighter line and the hose pulled out straight across instead of down. It was my style..modern but not too art deco. When the store I purchased it in didn't have anything to my liking in stock, I had to reassess what I wanted. I really didn't want an art deco design, but my choices were very limited. I needed to purchase one that day since my old faucet was completely broken and we were also replacing the sink the same day. When I saw this was pretty much my only choice, I was a bit depressed since I really didn't like the look. It reminded me of a laboratory faucet. But once we installed it my mind was changed. I love the fact that the hose pulled down right into the drain. I also loved that I didn't really have to pull it out the faucet, I could just pivot it to clear away debris. When using my old faucet, while using the hose, sometimes it would slip out of my hand, since it was so big and bulky. It was like trying to tame an octopus. The water would spray all over the kitchen as well as my clothes. It was always such a big mess. This faucet is very sleek and won't slip out of your hand. But even if it did, the hose faces down so water will only spray in the sink. I would recommend this to everyone January 12, 2014
Looks good, but drips... Great looking modern faucet that gets lots of compliments. It drips however, and sometimes has a random spray when in standard faucet mode. You have to really press down hard to make sure it is not in spray mode to prevent this. Even when not using the spry mode in awhile, it will randomly drip from it. January 28, 2013
  • 2015-05-27T06:26:26.659-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_10, tr_10
  • loc_en_US, sid_9159-DST, prod, sort_default
From time to time, Delta Faucet Company runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.

Customer Q & A

(22 Questions : 27 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

Does the Faucet rotate / swivel at the base?

Or is the angle that it is installed in, the permanent angle that it remains.
Topics: Features
3 months ago
Customer avatar
by
rmichaud
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers

Answer: 
Hi rmichaud, Thank you for your question. The spout on the model 9159-DST rotates a full 360 degrees.
Thanks,
Dave
Skill Level: Advanced
3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

Is there a version of this faucet with only a 7 or 8 inch reach?

I want something like this for a smaller sink. If a variation on this faucet does not exist, can you point me to a similar pull-out faucet with a 7 or 8 inch reach?
Topics: Features
Gender: Male
Project Type: Replacement
4 months, 2 weeks ago
Customer avatar
by
Lee
CA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Lee, The model 9959-DST is the smaller version Trinsic Bar/Prep faucet. The faucet has a reach of 6-1/2". Here is a link to the spec sheet for both models.
http://www.deltafaucet.com/customer...
Thanks,
Dave
Skill Level: Advanced
4 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

Is up (12 o'clock) supposed to be hot or cold?

We have the trinsic in our kitchen and love it! My mother in law was over recently and said that it was installed incorrectly and that hot is supposed to be up (as in handle at 12 o'clock) and cold is supposed to be down (as in pulled toward you). Is this correct?
5 months ago
Customer avatar
by
TC
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi TC, Thank you for your question. When the handle on the model 9159-CZ-DST is at the 12 o'clock position the faucet is actually off. To turn the water on you pull the handle to the right. The cold water starts there and gets hotter as you pull the handle forward. Your current installation is correct.
Thanks,
Dave
Skill Level: Advanced
5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

Flow rate

I had this faucet installed in a kitchen remodel. It's beautiful and looks great in my kitchen. It works great in "spray" mode, but in the "regular" flow seems very slow/weak to me. Could something be wrong with the faucet, or the installation? I read in one of the customer reviews that the flow seems to be somewhat of a "low flow". I'm just wondering if this is intended, or if we did something wrong. Thanks!
Topics: Performance
5 months, 2 weeks ago
Customer avatar
by
Laura
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Laura, Thank you for your question. The 9159-AR-DST has a max flow rate of 1.8 gallaons per minute. Older model faucets had flow rates of 2.2 to 2.5 gpm. This may be some of the difference that you are seeing. We recommend removing the wand assembly and turning on the faucet to flush the lines. Make sure that there is no debris in the wand affecting the flow as well.
Thanks,
Dave
Skill Level: Advanced
5 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

How far over sink does it project?

Without using the pull-out, how far over the sink does the faucet extend? In other words, what is the distance from the hole in the counter to the stream of water? I need a faucet that will clear the edge of my sink and not be too close
Topics: Features, dimensions
Age: 45 to 54
Gender: Female
Project Type: Replacement
5 months, 2 weeks ago
Customer avatar
by
TPOD
my kitchen
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers

Answer: 
Hi TPOD, Thank you for your question. The measurement from the faucet center(center of hole) to the center of the water stream is 9-1/2". Here is a link to the model 9159-AR-DST spec sheet with this information.
http://www.deltafaucet.com/customer...
Thanks,
Dave
Skill Level: Advanced
5 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

UK Adapter

Hello, I bought this model and need a UK adapter - please can you send me a link to the specific product so I know what to look for?

Thank you

H
Topics: Assembly
5 months, 2 weeks ago
Customer avatar
by
H
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi H, Thank you for your question.Our RP63263 adapter kit should work for your needs. The 2 sets of adapters convert the 3/8" compression thread on the faucet to either 1/2" compression or 1/2" IPS thread.
http://www.deltafaucet.com/repairpa...
Thanks,
Dave
Skill Level: Advanced
5 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

does this Trinsic faucet have an aerorator - that softens the stream when not on spray mode?

Topics: Features
6 months ago
Customer avatar
by
gary
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers

Answer: 
Hi Gary, Thank you for your question. The model 9159-AR-DST does have an aerator that is part of the wand assembly that controls the flow of water when the faucet is in stream mode.
Thanks,
Dave
Skill Level: Advanced
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

I'd like to buy this tap for use in the UK, do I need a special converter for UK plumbing?

Topics: Assembly
7 months ago
Customer avatar
by
TracyC
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi TracyC, Thank you for your question. The supply lines on the model 9159-CZ-DST have 3/8" compression fitttings.
We have adapters that will convert to 1/2" compression or 1/2" pipe thread sizes.
Thanks,
Dave
Skill Level: Advanced
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

What are the differences between models?

What are the differences between the Trinsic model 9159-AR-DST and the Allentown model 19935-SSSD-DST sold thru Home Depot? What would I get for an extra $200?
Topics: Purchase
Age: 55 to 64
Gender: Male
Project Type: Replacement
9 months ago
Customer avatar
by
CharlieW
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi CharlieQW, Thank you for your question. The main difference between the 9159-AR-DST and the 19935-SSSD-DST is in the styling of the faucet. Both faucets are pulldown spray models with magnedock, touch clean sprayheads, and our Diamand Seal Technology cartridges.
Thanks,
Dave
Skill Level: Advanced
9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
Has staff answer
Has expert answer
Trinsic Single Handle Pull-Down Kitchen Faucet
 
1 answer

Can this (9159-DST) be installed with on/off handle in front?

Customer avatar
by
Mary Jane
Sudbury, MA, USA
Your specifications indicate that 2 1/2 inch clearance is necessary between the spout center and the backsplash. My clearance is only 1 1/2 inch so I am wondering if this particular faucet can be installed so that the handle is positioned in front. Thank you for your help.
Topics: Assembly
Age: 65 or over
Gender: Female
Project Type: Replacement
11 months ago
Customer avatar
by
Mary Jane
Sudbury, MA, USA
+2points
2out of 2found this question helpful.
Was this helpful?helpful2unhelpful0

Answers

Answer: 
Hi Mary Jane, Thank you for your question. You can install the model 9159-DST with the handle in the front. The spout rotates the full 360 degrees and is not affected by the handle position. Be aware of the fact the the handle will then pull toward you to turn on, with hot to the right, and cold to the left. Also with the handle in front you will have to take care that the spout does not pour on your arm when turning the faucet on.
Thanks,
Dave
Skill Level: Advanced
11 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
  • 2015-05-27T06:32:44.554-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_9159-DST, prod, sort_default
2 next>>
  • 2015-05-27T06:32:44.559-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_9159-DST, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.