Delta Cartridge Assembly

My previous cartridge seemed to have a lower water flow (which I prefer). Once I replaced the cartridge, the water flow is quite strong (and my hot water runs out quickly). Is there a way to adjust any part of the cartridge to make it "lower flow"?

Topics: Performance, Assembly

Gender: Male

Project Type: Replacement

Ownership: < 1 year

Skill Level: Beginner

5 days ago

by

ASB

Anacortes, WA

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answer:

Thank you for your question. We have not altered the Delta Faucet model # RP19804. The flow cannot be adjusted. We recommend contacting our Home Owner/Warranty line for a possible replacement. Please call 800-345-3358 or email them at customerservice@deltafaucet.com.

Skill Level: Advanced

2 days ago

by

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

New cartridge assembly installed - still leaking

by

Jim

Highlands Ranch

Our shower faucet has been dripping the past few months. Finally got around to fixing it. Was told that the cartridge assembly needed to be replaced. Did that today, and followed all instructions, including an online video demonstration. All went smoothly, but after turing the water back on the shower head is still dripping a leak.

Topics: Care/Maintenance

Age: 45 to 54

Gender: Male

Project Type: New

Ownership: < 1 year

Skill Level: Beginner

1 month, 3 weeks ago

by

Jim

Highlands Ranch

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your question. I apologize for the issue that you are experiencing. To ensure the proper part is identified for repair, please contact our toll-free Home Owner/Warranty department at 800-345-3358.

Skill Level: Advanced

1 month, 2 weeks ago

by

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

having trouble removing brass bonnet on series 1400 shower valve need help

by

barman

Topics: Care/Maintenance

2 months, 4 weeks ago

by

barman

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your question. I apologize for the issue that you are experiencing. To ensure the proper part is identified for repair, please contact our toll-free Home Owner/Warranty department at 800-345-3358.

Skill Level: Advanced

2 months, 3 weeks ago

by

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

Is this a plug and play replacement part? Meaning this has all the new o rings etc. and I pull the old cartridge out and replace with the new.

by

Dave

Michigan

Topics: Care/Maintenance

Age: 55 to 64

Gender: Male

Project Type: Replacement

Ownership: 10+ years

Skill Level: Advanced

4 months ago

by

Dave

Michigan

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

2I have this question too

Answers

Staff
Expert

Answer:

Thank you for your question. Delta Faucet model # RP19804 does include everything you need when you are replacing the cartridge.

Skill Level: Advanced

4 months ago

by

Delta

Indianapolis, IN, USA

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

2 answers

Difference between RP19804 and RP46074

by

bojockman

Denver, CO, USA

What is the difference between these two replacement cartridges when both say they are for 14 series?

Age: 35 to 44

Gender: Male

Project Type: Replacement

Ownership: 2-5 years

Skill Level: Intermediate

4 months, 2 weeks ago

by

bojockman

Denver, CO, USA

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

3I have this question too

Answers

Staff
Expert

Answer:

Thank you for your question. Delta Faucet models RP46704 and RP19804 are both for the 1400 series. However they are for different valves. The RP46704 is used when you have a multi-choice valve, model R10000, in your wall. The RP19804 is used for a pre-multi-choice valve. If your valve was manufactured before 2006, then use the RP19804.

Skill Level: Advanced

4 months, 1 week ago

by

Delta

Indianapolis, IN, USA

-2points

1out of 4found this answer helpful.

Was this helpful?helpful1unhelpful3

Answer:

If you look at the enlarged picture of each cartridge, you will notice the RP46074 has longer insert tubes (about 1/4 ") that fit into the brass valve body. The RP19804, with shorter inserts, barely reach and seat into the hot and cold valve body ports. Therefore, the valve is going to constantly leak.

Age: 55 to 64

Gender: Male

Project Type: Replacement

Ownership: 2-5 years

Skill Level: Intermediate

1 week, 3 days ago

by

Raymondo

Montross, VA

+1point

1out of 1found this answer helpful.

Was this helpful?helpful1unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

installed series 13/14 delta part rp 19804 and cannot turn water off now any suggestions also only luke warm water will flow no hot or cold ?

by

Dennis

Lockport, NY 14094, USA

Topics: Care/Maintenance

Age: 55 to 64

Gender: Male

Project Type: Replacement

Ownership: 2-5 years

Skill Level: Intermediate

5 months ago

by

Dennis

Lockport, NY 14094, USA

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

4I have this question too

Answers

Staff
Expert

Answer:

Thank you for your question. I apologize for the issue that you are experiencing. To ensure the proper part is identified for repair, please contact our toll-free Home Owner/Warranty department at 800-345-3358.

Skill Level: Advanced

5 months ago

by

-2points

0out of 2found this answer helpful.

Was this helpful?helpful0unhelpful2

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

I am installing a new cartridge in a model 1400 shower diverter, when I tried to remove the bonnet, the raised brass section turned ccw. Now what ?

by

Handyman

Utah

Topics: Care/Maintenance

Age: 45 to 54

Gender: Male

Project Type: New

Ownership: 6-10 years

Skill Level: Advanced

5 months, 3 weeks ago

by

Handyman

Utah

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your question. I apologize for the issue that you are experiencing. To ensure the proper part is identified for repair, please contact our toll-free Home Owner/Warranty department at 800-345-3358.

Skill Level: Advanced

5 months, 3 weeks ago

by

-1point

0out of 1found this answer helpful.

Was this helpful?helpful0unhelpful1

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

I am trying to replace the washers on a delta monitor shower faucet. I removed the allen screw from the handle and am unable to remove the handle.

by

Joe

I do not want to use excessive force and cause damage. Is there a way to remove the handle without breaking anything?

Topics: Care/Maintenance

5 months, 3 weeks ago

by

Joe

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your question. It may be that you handle had mineral or hard water deposits on it. To remove these, soak the handle with a towel wrapped in a 50/50 solution of white vinegar and cold water overnight.

Skill Level: Advanced

5 months, 3 weeks ago

by

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

Are the two small o-rings that fit into the valve body available?

by

Jerry

Wisconsin, USA

Topics: repair

Age: 55 to 64

Gender: Male

Project Type: Replacement

Skill Level: Advanced

6 months ago

by

Jerry

Wisconsin, USA

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Answers

Staff
Expert

Answer:

Thank you for your question, Jerry! The two small O-rings that make up Delta Faucet part #RP19804 are not available as a separate piece. The entire part would need to be ordered. if needed, please feel free to contact our toll-free home owner warranty line at 800-345-3358.

Skill Level: Advanced

6 months ago

by

Delta

Indianapolis, IN, USA

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Has staff answer

Has expert answer

Delta Cartridge Assembly

1 answer

Why have pipes rattle after replacing cartridge?

by

KevO

Texas, USA

Replaced cartridge to fix a leaky shower. Stopped leak but now pipes rattling/banging when turning towards hot (usually start about the interphase between cold and hot). Is this an issue with the cartridge or the pressure in the pipes?

Topics: Performance, Care/Maintenance

Age: 35 to 44

Gender: Male

Project Type: Replacement

Ownership: 2-5 years

Skill Level: Beginner

10 months ago

by

KevO

Texas, USA

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

2I have this question too

Answers

Staff
Expert

Answer:

Thank you for your question. It is possible that when you replaced Delta Faucet model # RP19804 with a new cartridge, some debris may have gotten in the lines. This could cause the rattiling. We recommend taking out the cartridge after making sure the water is off and then closing the shower door or shower curtain and turning the water back on for 1-2 minutes. This should flush any debris out of your lines. If this is not successful, please contact our Home Owner/Warranty line at 800-345-3358.

Skill Level: Advanced

10 months ago

by

+1point

1out of 1found this answer helpful.

Was this helpful?helpful1unhelpful0