Delta Pull-out Hose Assembly, Clip and O-ring

Delta Pull-out Hose Assembly, Clip and O-ring
Model #:RP44647

What does this model number mean?

List Price as
Shown (US $):1
$89.20
This item usually ships within one day.
Quantity: Add To Delta Cart

Customer Q & A

(20 Questions : 23 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
It does't leak when the spray nozzle is off, but it also isn't usable. We have a feeling it's the o-ring at the tip, but can't seem to find any information about what size it is to get it replaced. Please help. An o-ring is much cheaper than a new hose. Thank you.
Topics: Warranty, parts
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Beginner
1 month, 3 weeks ago
Customer avatar
by
lsblue
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Isblue, Thank you for your question. The o-ring on the end ot the RP44647 pull out hose assembly is available to order separately as the RP13938.
http://www.deltafaucet.com/repairpa...
Thanks,
Dave
Skill Level: Advanced
1 month, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

Not sure what Delta faucet I have. Need to replace leaking hose

Customer avatar
by
Tab
Commerce charter Township, MI, USA
My Faucet is about eight years old I am unable to identify which model it is. The hose is leaking out the side. I need to replace the hose what part do I need? Please help me I am being held hostage by this. It needs to be fixed it is the only Faucet we have in our kitchen.
Age: 45 to 54
Gender: Male
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Intermediate
2 months, 1 week ago
Customer avatar
by
Tab
Commerce charter Township, MI, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Tab, Thank you for your question. The RP44647 pull out hose is used on our non-dst faucets. The RP50390 hose assembly is used on our faucets that have DST (diamond seal technology) as a feature and in the model number. The DST faucets were introduced in 2007. The easiest way to tell the non-dst vs the dst faucets is by the supply lines. The DST faucets will have gray pex/plastic lines that run out of the faucet and all the way down directly to the water shut off valves. The non-DSt faucets will generally have copper tubing coming out of the faucet and then trasnsitioning to a traditional plastic, vinyl, or metal braided faucet supply line.
Thanks,
Dave
Skill Level: Advanced
2 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

I need a hose for a 10 year old faucet. I've attached photos of the faucet and the hose. Is RP44647 the correct replacement hose?

Customer avatar
by
Glenn
North Carolina, USA
Topics: Purchase
Age: 45 to 54
Gender: Male
Project Type: New
Ownership: 10+ years
Skill Level: Beginner
User submitted photo
User submitted photo
2 months, 2 weeks ago
Customer avatar
by
Glenn
North Carolina, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Glenn, Thank you for your question. The RP44647 is the correct replacement hose assembly for your 10 year old model 470 faucet. The hose has changed from your pictured version.
Thanks,
Dave
Skill Level: Advanced
2 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
Topics: Assembly
2 months, 2 weeks ago
Customer avatar
by
ungar29
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Ungar29, Thank you for your question. The RP44647 is the pull out hose assembly for our non-dst pull down or pull out faucets and the RP50390 is the hose assembly for the DST (Diamond Seal Technology) faucets that were introduced in 2007. The hose assemblies are not interchangeable.
Thanks,
Dave
Skill Level: Advanced
2 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
How do I make it fit clamp to the hose assembly connection?
Topics: Assembly
Age: 55 to 64
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Intermediate
2 months, 2 weeks ago
Customer avatar
by
LB
NC
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi LB, Thank you for your question. The clamp attached to the cold water line is a sensor tag placed in retail model faucets that should be removed and disgarded as it is not part of the faucet. The model 19922-SD-DST uses a blue or black u-shaped channel clip to attach the hose to the faucet shank.
Thanks,
Dave
Skill Level: Advanced
2 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

Model #'s for faucet that uses RP44647

Can you provide all the model numbers of Faucets that uses this hose RP44647?
Topics: Features, Care/Maintenance, Assembly
3 months ago
Customer avatar
by
VG
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1

Answers

Answer: 
Hi VG, Thank you for your question. The RP44647 pull out hose assembly is used on our non-DST (Diamond Seal Technology) kitchen faucets with pull-down, or pull-out wand assemblies. The attached product page lists the models that use this hose.
http://www.deltafaucet.com/repairpa...
Thanks,
Dave
Skill Level: Advanced
2 months, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

I am replacing the hose on kitchen faucet MD 474-SS

I can not get the hose to disconnect from the faucet spray head.

I un screwed the nut but it just wont let go. I have tried pulling on it no help.

Is there some kind of release or some type of a "keeper" ring that needs to be released in order for the hose to come out??

Thanks,

Bob
Topics: Care/Maintenance
Age: 65 or over
Gender: Male
Project Type: New
Ownership: 6-10 years
Skill Level: Intermediate
6 months ago
Customer avatar
by
Bob
Denver, CO, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Bob, Thank you for your question. Once the threaded portion of the hose is unscrewed there is not anything holding the wand onto the hose on your model 474-SS faucet. It sounds like the o-ring at the end of the hose has dried out and will not slide out easily. Try twisting and turning as you pull to remove the wand.
Thanks,
Dave
Skill Level: Advanced
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

Will this hose fit my faucet?

I do not have the model number for this older faucet. Please see attached photo of the faucet and let me know if this will fit or which model hose I need. Thank you.
Topics: Assembly
Skill Level: Intermediate
User submitted photo
7 months ago
Customer avatar
by
blau
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Blau, Thank you for your question. The RP44647 hose assembly would be the correct hose for the older model 470 faucet. This faucet will have copper lines running out of the bottom of the faucet and would require that additional supply lines be purchased to attach the faucet to the water shut offs/stops. The replacement hose assembly for the newer model 470-DST is the RP74608. The DST version of the faucet will have pex/plastic lines running out of the bottom of the faucet all the way to the water supply stops.
Thanks,
Dave
Skill Level: Advanced
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

Removal of hose clip assembly

Customer avatar
by
SteveCO
Littleton, CO, USA
I need to remove the clip, RP32522 and hose assembly, RP44647 in order to tighten the faucet to the sink. I ordered and received part RP11752 for this purpose.
How do I remove the clip the where the hose meets the valve shank?
I don't understand what the black plastic clip does?
Can I just pull down on it to remove it?
Is there a danger of ruining this connection if I use the wrong pressure?
How does a plastic clip ensure that the connection is secure?
Thanks,
SteveCO
Age: 65 or over
Gender: Male
Project Type: New
Ownership: 6-10 years
Skill Level: Intermediate
7 months ago
Customer avatar
by
SteveCO
Littleton, CO, USA
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers

Answer: 
Hi SteveCO, Thank you for your question. To remove the RP32522 clip pry the open ends of the clip apart and pull off. Once the clip is removed there is nothing mechanical holding on the hose. Grab both sides of the connection and pull the hose off of the connection, do not simply pull down on the hose.. The RP32522 clip locks the connection in place once the hose is fitted onto the faucet.
Thanks,
Dave
Skill Level: Advanced
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta Pull-out Hose Assembly, Clip and O-ring
 
1 answer

What is the difference with hose RP44647 and RP32527, and are they interchangable?

Topics: parts, replacement
7 months ago
Customer avatar
by
JC
+2points
2out of 2found this question helpful.
Was this helpful?helpful2unhelpful0

Answers

Answer: 
Hi JC, Thank you for your question. The RP44647 includes the RP32527 hose and the clip and o-ring needed for installation. RP32527 is for the hose only.
Thanks,
Dave
Skill Level: Advanced
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
  • 2015-04-18T07:06:17.768-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_RP44647, prod, sort_default
2 next>>
  • 2015-04-18T07:06:17.805-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_RP44647, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.