Delta Cartridge Assembly - 1300/1400 Series

Delta Cartridge Assembly - 1300/1400 Series
Model #:RP19804

What does this model number mean?

List Price as
Shown (US $):1
$68.65
This item usually ships within one day.
Quantity: Add To Delta Cart

Product Support & Tech Specs

Support Information:

Installation Instructions / Owner's Manual

Customer Q & A

(26 Questions : 27 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

Can I purchase just plastic ring on scald guard

The plastic ring that is part of the scald guard was removed and lost during the middle of renovating a 5 unit building. The pics below are from another shower unit ... can I purchase just the plastic ring replacement and if so, where can I find it? Thank you.
Topics: Care/Maintenance
User submitted photo
User submitted photo
5 days ago
Customer avatar
by
Lisa
Virginia, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Lisa, Thank you for your question.
The part is the RP19807 rotational limit stop.

Best regards, Brandis
4 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

Can I use the RP19804 cartridge with the T17038-SS handle?

I have an older cartridge type that is being replaced with the RP1980R cartridge. At the same time, I was sold the T17038-SS handle/trim package which includes totally different cartridge. Can I use this handle assembly with the old cartridge style (RP19804)?

The new handle has 2 controls, one for temperature and one for volume. Will these 2 functions work with the old cartridge (RP19804)? My previous handle assembly had just handle one handle that controlled both volume and temperature.
Topics: Assembly
Age: 45 to 54
Gender: Male
Project Type: Replacement
Ownership: 10+ years
Skill Level: Intermediate
2 weeks, 1 day ago
Customer avatar
by
James D
Indiana, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello James D,

Thank you for your question!

Unfortunately, it sounds like you have a 1400 series Delta shower unit. You can only exchange your current trim for another 1300 or 1400 series trim and you must use the RP19804 cartridge if you have that cartridge already.

If you want to use the T17038-SS you would have to tear out your existing rough in valve and replace it with an R10000.

I hope this helps!
2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet9 is loaded.
Additional information about DeltaFaucet9 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

How do adjust the temperature more?

Customer avatar
by
Brent
Fairview Heights, IL, USA
I pull and adjusted toward the hotter as high as I could get it. It is not allowing me to adjust it anymore. The old model went further. The spout temp for water is 106 degree fahrenheit. I need it to be at the 120 marker.
Topics: Care/Maintenance, Performance
Age: 35 to 44
Gender: Male
Project Type: Replacement
Ownership: 2-5 years
Skill Level: Intermediate
1 month, 1 week ago
Customer avatar
by
Brent
Fairview Heights, IL, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Brent,

Thank you for your question. The cartridge has a Rotational Limit Stop which can be adjusted to allow you turn the handle further on the hot side. Newer units will have a gray stop that you can pull out, rotate, and set back into place. Each notch will change the maximum temperature 3-6 degrees.

http://www.deltafaucet.com/shopping...

Best regards,
Jon
1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

Have converted a 1996 tub/shower combo to just a shower. Have tried tried 3 cartridges recommended from hard ware stores without success.

Customer avatar
by
Don
1418 Austin Drive, Lebanon, IN 46052
what cartridge do I need to get this shower working? Attached is photo of original cartridge and the newest one recommended that we purchased and didn't fit.
Topics: Purchase
Age: 45 to 54
Gender: Male
Project Type: New
Ownership: 10+ years
Skill Level: Beginner
User submitted photo
User submitted photo
User submitted photo
2 months ago
Customer avatar
by
Don
1418 Austin Drive, Lebanon, IN 46052
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello Dan,

Thanks for your question. I am sorry to hear about the issues you have been having and I will be more than happy to help. Looks like that's an 1500 series cartridge. You'll need RP32104.

I hope this helps!
2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet4 is loaded.
Additional information about DeltaFaucet4 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

What can I upgrade to?

I have a RP19804 cartridge in my shower now. Can I convert the trim kit to a 17 series without changing the rough in valve?
Topics: Assembly
3 months, 4 weeks ago
Customer avatar
by
B!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hello B!,

Thank you for your question. Unfortunately, if you have the RP19804 currently, you can only use T13 or T14 trims without needing to change out the rough in valve. You would keep using the RP19804 with this new T13 or T14 trim.
3 months, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet4 is loaded.
Additional information about DeltaFaucet4 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

the faccuet leaked I replaced my 1300/1400 series with a RP19804

Now the handle dose not rotate the 90 degrees only 45 and the water on gets warm. I checked the old cartage and it has type P stamp above the letter H. It also has TO41O along side the H. Do l need a different cartridge?
Topics: Care/Maintenance
Age: 65 or over
Gender: Male
Project Type: Replacement
Ownership: < 1 year
Skill Level: Beginner
4 months ago
Customer avatar
by
Ed
Wyoming, MI, USA
+2points
2out of 2found this question helpful.
Was this helpful?helpful2unhelpful0

Answers

Answer: 
Hi Ed,

Thank you for your question. You may adjust the rotational limit stop (RLS) on the front of the cartridge to allow for hotter water. To do this, access the cartridge by removing the handle, pull the RLS out toward you, rotate it counter-clockwise, and release it. Each notch represents about 6º F. Please be sure to measure the water at the hottest setting so that it is not above what is allowed by your local plumbing code (110º F or 120º F).

Thanks,
Jon
4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
looking to modernize my kits with out tearing up my walls and plumbing by having to replace the mixer etc.
Topics: Care/Maintenance, Features
Ownership: 6-10 years
Skill Level: Intermediate
5 months ago
Customer avatar
by
ed
chicago
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Ed,

Thank you for your question! Any of our T13 or T14 series trim kits will work with the existing valve. However, you will need to use the RP19804 cartridge rather than the one that comes with the kit.

http://www.deltafaucet.com/search/r...

Thanks,
Jon
5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

I have a shower that has the old RP19804 Delta Cartridge, but it is "trimmed" with a Danco Trim Kit.

Customer avatar
by
Middle Georgia
Read all my Q&A
 
Please wait while more information about cajunjake is loaded.
Additional information about cajunjake could not be loaded.
I would like to know which Delta Shower Trim Kit is compatible with the RP19804 Cartridge (is it any Series 14 Monitor?) - and I want the metal handle not the acrylic knob.

Thank you.
Topics: Features
Age: 55 to 64
Gender: Male
Project Type: Replacement
Ownership: 10+ years
Skill Level: Intermediate
5 months, 3 weeks ago
Customer avatar
by
Middle Georgia
Read all my Q&A
 
Please wait while more information about cajunjake is loaded.
Additional information about cajunjake could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi cajunjake,

Thank you for your question! Any T13 or T14 series trim kit will work with your valve. Please be sure to use the existing cartridge (or a new RP19804) rather than the cartridge that comes with the kit.

Thanks,
Jon
5 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

Is there a replacement Satin Nickel shower trim kit for Monitor 1400 using existing valve cartridge

We have a Delta shower faucet trim in a champagne finish and would like to replace it to match our the brushed nickel or stainless faucets for our sinks. I saw MTZ-T6611-SNLHP which looks like our faucet, but it is discontinued. Can you recommend a traditional shower faucet trim in satin nicket/stainless that might work with our existing valve... or, if we needed to, could we upgrade the valve cartridge to work with Delta Windemere (BT-14296-SS)? If so, is there an adaptor and cartridge that I could insert into the existing valve mounting? What are the parts required? Thanks
Gender: Male
Project Type: Replacement
Ownership: 10+ years
Skill Level: Intermediate
6 months ago
Customer avatar
by
Nick
Pennsylvania
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Nick,

Thank you for your question! Any of our 14 series trims, such as the T14255-SSLHP, T14297-SSLHP, or BT14296-SS would work on an existing 1400 series valve. However, you will need to use the existing cartridge (or RP19804) rather than the cartridge that comes with the trim kit.

http://www.deltafaucet.com/search/r...

Thanks,
Jon
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Cartridge Assembly - 1300/1400 Series
 
1 answer

Replaced cartridge, have parts left

I have a 1300/1400 series Monitor faucet. I removed the old cartridge which had a brass ring with teeth and a plastic limit stop disc. Both of these pieces came off separately. When I installed the replacement cartridge RP19804 (house was built in 1999) there was no room for the brass or plastic piece. I see the new one has it already incorporated but wanted to make sure that I was not to utilize these two left over pieces. I have watched many videos but no one is installing the cartridge that I bought at Home Depot that has the limit stop incorporated in the piece...similar, but not the same. Everything seems to work. Please advise. Thank you!
Topics: Assembly
Age: 35 to 44
Gender: Female
Project Type: Replacement
Ownership: 10+ years
Skill Level: Beginner
User submitted photo
User submitted photo
User submitted photo
User submitted photo
7 months ago
Customer avatar
by
Kim
New York
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Kim,

Thank you for your question! You may discard the rotational limit stop pieces from the original cartridge.

Thanks,
Jon
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-02-13 T06:43:55.299-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_RP19804, prod, sort_default
2 next>>
  • 2016-02-13 T06:43:55.305-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_RP19804, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.