Delta Retainer - Spout

Delta Retainer - Spout
Model #:RP21463

What does this model number mean?

List Price as
Shown (US $):1
$5.10
This item usually ships within one day.
Quantity: Add To Delta Cart

Customer Q & A

(9 Questions : 10 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Topics: Care/Maintenance
Age: 65 or over
Gender: Male
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Intermediate
2 weeks, 3 days ago
Customer avatar
by
Bill
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Bill, Thank you for your question!
Once the spout bonnet is raised and the retainer is removed the spout assembly should slide off the valve body.

Best regards,
Brandis
2 weeks, 3 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet7 is loaded.
Additional information about DeltaFaucet7 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Retainer - Spout
 
2 answers

How do I remove spout bonnet RP40371 from body RP40370 on a model 187 series faucet?

The tapered profile of the bonnet does not allow for a strap wrench to get purchase on it - as you apply torque it just slides north onto the spout assembly. Alternatively, can I get the spout assembly off of the bonnet to access the o rings without access to the retaining clip, which resides in the bonnet? It seems that if I just whack it northward, I may break the retaining clip, which I can't access at this point.
Topics: Care/Maintenance
Ownership: 6-10 years
5 months, 2 weeks ago
Customer avatar
by
Frank
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
I just experienced the same frustration with the tapered neck on the bonnet. The solution came from my son when he suggested using duck tape. So I wrapped several 1" strips on the upper part of the neck in order to make it approximately the same diameter as the rest of the bonnet. That gave me enough surface area for the strap wrench to get a good even grip, and after some serious torque the bonnet finally broke free! From there it was all downhill and after replacing the O rings my faucet is now leak free.
3 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DaveH is loaded.
Additional information about DaveH could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Hi Frank,

Thank you for your question. The bonnet should unscrew from the base by hand. However, over time there may be mineral buildup causing it to stick. You can try soaking a rag with a half and half white vinegar and water solution and wrapping it around the bonnet for about 15 -30 minutes using a rubber band. A rubber jar opener should also help grip the bonnet. Once the bonnet is unscrewed, you can lift the spout straight up to remove it.

Thanks,
Jon
5 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet3 is loaded.
Additional information about DeltaFaucet3 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

Broken part?

Leaking at the base. Is the round base of the part solid at the bottom, or does it have a break between one of the upright arms to allow for install? Mine separates at the base and I can't tell if it is cracked, or supposed to be that way. I'm going to replace the O rings for sure, but would order this if needed.
Topics: Care/Maintenance
User submitted photo
1 year, 2 months ago
Customer avatar
by
Robert
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Robert, Thank you for your question. The RP21463 spout retainer is not solid all the way around the base. The split allows the spout retainer to be opened wide enough for installation or removal. Replacing the o-rings should solve your issue.
Thanks,
Dave
Skill Level: Advanced
1 year, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

Does the spout install above the retainer or behind it?

Topics: Care/Maintenance
Age: 65 or over
Gender: Male
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Beginner
1 year, 6 months ago
Customer avatar
by
Henry
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Henry,

Thank you for your question. Delta Faucet model # RP21463 is a spout retainer that will fit inside the spout.

Thanks.

Jody
Skill Level: Advanced
1 year, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

When the retainer is removed, can it be used again or must it be replaced?

1 year, 8 months ago
Customer avatar
by
Joe
+5points
6out of 7found this question helpful.
Was this helpful?helpful6unhelpful1

Answers

Answer: 
Hi Joe, Thank you for your question. If there is no damage to the RP21463, the spout retainer it can be reused.
Thanks,
Dave
Skill Level: Advanced
1 year, 8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

Kitchen faucet leak

Model 172 leaks around the base only when the cold water is turned on Could it be the retainer RP21463 or the o-rings
Topics: Care/Maintenance
Age: 45 to 54
Gender: Male
Project Type: New
Ownership: 2-5 years
Skill Level: Intermediate
1 year, 9 months ago
Customer avatar
by
Jim
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Jim, Thank you for your question. The RP21463 spout retainer should not be an issue with regard to the leak. The RP22934 o-rings would be the part that you will want to replace.
Thanks,
Dave
Skill Level: Advanced
1 year, 9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

how to remove the delta retainer-spout?

I am trying to fix a leak that happens when the cold water is turned on. The leak isn't as great when the hot/warm water is turned on.
Topics: Care/Maintenance
2 years ago
Customer avatar
by
Nick
-3points
0out of 3found this question helpful.
Was this helpful?helpful0unhelpful3

Answers

Answer: 
Hi Nick, Thank you for your question. To remove the RP21463 spout retainer you will want to press down on the retainer and slowly pry apart the bottom of the retainer to release the part from the faucet.
Thanks,
Dave
Skill Level: Advanced
2 years ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

Classic 2 handle waterfall kitchen faucet (2176-LHP-H24-A24 (chrome)

Customer avatar
by
David
Baton Rouge, LA, USA
The spout assembly lifts upward and off the base when I turn on the water. I have removed the aerator and also tried replacing the #2 o rings and neither one of these actions resolved the problem. On close inspection, the inside of the spout retainer ( part # RP 21463) has # 2 raised rectangular shoulders that align with the spout bonnet ( part# RP21825A). These #2 "shoulders" appear to be worn and I guess that these raised areas are intended to hold the spout in place when turning on the water? Please advise as to your opinion as to what to do to fix the problem. Thanks,
Topics: Care/Maintenance
Age: 55 to 64
Gender: Male
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Intermediate
2 years, 3 months ago
Customer avatar
by
David
Baton Rouge, LA, USA
+3points
3out of 3found this question helpful.
Was this helpful?helpful3unhelpful0

Answers

Answer: 
Hi David, Thank you for your question. You are correct that the spout retainer helps hold the spout into place on your model 2176-LHP-H24-A24 faucet. Replacing the worn RP21463 should help solve the issue, although there is usually some movement on the hi arc spout when the water is turned on.
Thanks,
Dave
Skill Level: Advanced
2 years, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Retainer - Spout
 
1 answer

does the spout on a mod. 174 kitchen faucet just pull off out of the retainer?

4 years ago
Customer avatar
by
Rich
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. The spout bonnet (Delta part #RP21464) would first need to be removed. At that point, the spout can then be detached from the retainer. Below is a link to the maintenance & installation guide for the 174-WHWF, which includes a parts breakdown.

http://www.deltafaucet.com/customer...
Skill Level: Advanced
4 years ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
-1point
5out of 11found this answer helpful.
Was this helpful?helpful5unhelpful6
  • 2016-05-03 T00:35:39.354-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_RP21463, prod, sort_default
1 of 1
  • 2016-05-03 T00:35:39.358-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_RP21463, prod, sort_default
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.