Delta Bonnet Cap

Delta Bonnet Cap
Model #:RP51502

What does this model number mean?

List Price as
Shown (US $):1
$7.85
This item usually ships within three days.
Quantity: Add To Delta Cart

Customer Q & A

(2 Questions : 2 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Delta Bonnet Cap
 
1 answer

SPECIFICATIONS AND DIMENSIONS NEEDED

Customer avatar
by
Granna
I had a granite countertop installed. The hole drilled is too small for my faucet to drop all the way down. It has an estucheon (cover plate) but it won't work because the sink is curved on the back. Will a product like this work to hide the plastic part sticking above the countertop?
Topics: Assembly
Ownership: 2-5 years
Skill Level: Intermediate
1 year, 1 month ago
Customer avatar
by
Granna
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Granna,

The dimensions for this part are as follows:
The outside diameter of the larger opening on the bottom of this part is 1 5/8" and the inside diameter of the smaller opening is 1 1/8".
The piece is a little less than 1" tall.

I hope this information is helpful.
1 year, 1 month ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about JessW is loaded.
Additional information about JessW could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Bonnet Cap
 
1 answer

How do I get the cap off after I unscrew the single plastic handle with phillips screw?

Customer avatar
by
BruceOnTheBike
Irmo, SC, USA
On the Bonnet Cover Cap shown above there is no band of ribs visible. On my cap there is a 1/4 inch band of ribs that looks like where to apply a pipe wrench to unscrew the cap (countercw) if it does not unscrew easily by hand. When I apply the pipe wrench with power nothing unscrews. That cannot be good. Does the upper portion of the cap unscrew leaving the part with the band of ribs in place? If so how? Is a strap wrench needed or is hand strength enough? Is counter cw correct? I am ready with a ball RP212F that matches the ball tip I see that is sticking up from the cover I want to remove to replace it if needed. The faucet spout itself not the body or base (looks like a 501 or 522 model) is sometimes leaking but always stops if the single faucet handle is moved slightly left or right. The leaking cannot be consistently demonstrated. Part of me wants to leave it alone....but .... since I am the owners handyman I am not voting.
Topics: Care/Maintenance
Age: 65 or over
Gender: Male
Project Type: New
Ownership: 10+ years
Skill Level: Advanced
1 year, 7 months ago
Customer avatar
by
BruceOnTheBike
Irmo, SC, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Regarding your bonnet cap, the whole thing should be able to unscrew by hand or with a channel strap. It is possible that there are mineral deposits built up underneath the cap. We recommend using a towel soaked with a 50/50 solution of white vinegar and cold water. Soak the area for a couple of hours or overnight is better.
Skill Level: Advanced
1 year, 7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.