Delta Stopper

Delta Stopper

Customer Q & A

(7 Questions : 7 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

Stopper installation - loop and orientation

Customer avatar
by
Karl
My current stoppers will only raise 1/8", even after disconnecting the linkage and pushing the rod fully down. This is inadequate to drain the sink (a small air bubble is enough to prevent drainage).

I am wondering if the builder installed the stopper correctly.

Which of the holes in the double loop should the rod go through? Should the stopper be oriented with the loop toward the front or back of the sink?

Thank you.
Topics: Assembly
3 months ago
Customer avatar
by
Karl
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Karl, Thank you for your question. To maximize the motion of the stopper you will want to place the horizontal rod through the lower loop. The loop can be either forward or back.
Thanks,
Dave
Skill Level: Advanced
2 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

what is the correct drain stopper for faucet model #2530-24

Customer avatar
by
harry
Topics: Care/Maintenance, Assembly
1 year ago
Customer avatar
by
harry
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Harry, Thank you for your question. The RP5648 is the stopper used in model 2530-24.
Thanks,
Dave
Skill Level: Advanced
1 year ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

is this the stopper that would be used with 520PBWF faucet; if not which should I order

Customer avatar
by
bb
Florida
Topics: Assembly
Gender: Female
Project Type: Replacement
Ownership: 2-5 years
Skill Level: Beginner
1 year ago
Customer avatar
by
bb
Florida
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi BB,
Thank you for your question. You will want to order the RP5648BB. That will match the brass finish on the 520PBWF faucet.
Thanks,
Dave
Skill Level: Advanced
1 year ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about DeltaFaucet2 is loaded.
Additional information about DeltaFaucet2 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

How do you remove the stopper to clean the drain?

Customer avatar
by
Dennis
I have attempted to rotate the stopper while open and it does not disengage from the lever arm.
Topics: Care/Maintenance
1 year, 8 months ago
Customer avatar
by
Dennis
+2points
6out of 10found this question helpful.
Was this helpful?helpful6unhelpful4

Answers

Answer: 
Thank you for your question. Delta Faucet model # RP5648 is attached at the base to the horizontal arm. There should not be a need to remove it to clean it. However, you can go underneath the sink and remove it from the horizontal arm.
Skill Level: Advanced
1 year, 8 months ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
-6points
2out of 10found this answer helpful.
Was this helpful?helpful2unhelpful8
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

What is the diameter of the stopper?

Customer avatar
by
Erwin
Topics: Features
2 years ago
Customer avatar
by
Erwin
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. The diameter of the cap is 1.35".
Skill Level: Advanced
2 years ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

Is the washer/gasket on the Delta Drain Stopper replaceable or must one purchase the entire stopper?

Customer avatar
by
Gene
Virginia
Topics: Care/Maintenance
Age: 65 or over
Gender: Male
Project Type: Replacement
Ownership: 10+ years
Skill Level: Intermediate
2 years, 3 months ago
Customer avatar
by
Gene
Virginia
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question, Gene! At this time there is not a separate part number for the washer/gasket on Delta Faucet model #RP5648. The entire stopper will need to be ordered. Please feel free to contact our Homeowner/Warranty experts at 800-551-1508.
Skill Level: Advanced
2 years, 2 months ago
Customer avatar
by
Indianapolis, IN, USA
Read all my Q&A
 
Please wait while more information about Delta is loaded.
Additional information about Delta could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
Has expert answer
Delta Stopper
 
1 answer

Is this the only Delta popup Drain Stopper available?

Customer avatar
by
homeowner
Florida, USA
I have a classic one lever ("crystal" knob lever-my model shows that it is discontinued) bathroom faucet that needs a new popup drain stopper. I found a replacement but the picture only shows one opening at the bottom for the "adjustment rod" to be attached through. My "good" stopper has 2 openings at the bottom for the "adjustment rod" to go through. Will this one opening popup stopper work in my drain?
Topics: replacement parts
Age: 55 to 64
Gender: Female
Project Type: Replacement
Ownership: 6-10 years
Skill Level: Intermediate
2 years, 4 months ago
Customer avatar
by
homeowner
Florida, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your question. Delta Faucet model # RP5648 does have a double loop at the bottom. The picture is incorrect. Thank you for bringing it to our attention so that we can get it fixed.
Skill Level: Advanced
2 years, 4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Delta1 is loaded.
Additional information about Delta1 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  1. The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.