Dawson

Monitor® 14 Series Tub & Shower Trim

Download Image

144720 is rated 4.2 out of 5 by 5.
  • y_2019, m_10, d_18, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_144720, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 35ms
  • REVIEWS, PRODUCT
  • Backed by Delta Faucet’s Lifetime Limited Warranty
  • WaterSense® Labeled
Finish: Chrome
List Price*: $280.00
Base Parts
144720
List Price*: $280.00
  • WaterSense certification promotes water conservation
  • Monitor pressure balance valve keeps water temperature within a safe +/-3degrees F (+/-1.6degrees C), helping to protect you from sudden changes in hot or cold water pressure
  • Soft, rubber spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your showerhead and handshower with the touch of a finger
  • Complete unit includes trim and rough-in
  • Single function operation
  • Single lever handle for ease of temperature control
  • Meets standards set by Americans with Disabilities Act (ADA)
  • Spray settings include: Full Body

Installation Information


  • Flow Rate: 2.00 gpm, 7.6 L/min
  • Spout Length: 7-11/16"
  • Fittings Type: Universal fittings
  • Valve Type: Single-function pressure balance cartridge
  • Spray Settings: Full Body Spray
Rated 1 out of 5 by from Looks good! 4 weeks after installation i’ve had to replace the main valve. The faucet is also getting replaced because it doesn’t completely divert water flow from faucet to shower. very disappointing for these $ paid for well known brand.
Date published: 2019-09-26
Rated 5 out of 5 by from Very attractive! The Waterfall tub spout drew our attention. Delta is good quality and easy to maintain.
Date published: 2017-08-30
Rated 5 out of 5 by from Works and Looks Great. Was attracted to the open water flow tub spout. Wish you could buy the spout as a single item for older tubs.
Date published: 2017-08-22
Rated 5 out of 5 by from We love the look and quality We love the look of our new faucets and the adjustment that no one can get burned by the water being to hot. Instructions were easy as a I done the installation.
Date published: 2017-07-18
Rated 5 out of 5 by from The Dawson tub and shower set has the kind of old time water pump look that caught my wife's attention. The Delta Dawson tub and shower set finished off our bathroom remodel nicely. I did the work myself. The instructions were easy to understand and installation went without a problem. My wife picked it out and loves it. We got the brushed nickel finish which is easy to keep looking new. Ron B Wichita
Date published: 2017-05-20
  • y_2019, m_10, d_18, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_144720, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • REVIEWS, PRODUCT

What material is the spout made of? Does the stainless finish match all the other delta stainless products?

Asked by: alignmatt
Hi, alignmatt! Thank you for your question. The Delta RP78454SS is made of plastic material. The Brilliance Stainless Steel finish will match other Brilliance Stainless Steel faucets in our Delta line. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-11-01

can the faucet on the 144720-ss be installed with the slip on method?

there is no set screw on the faucet. if possible to use the slip on installation, how long does the 1/2 inch copper need to be from the finished wall?
Asked by: booey
Hi booey, Thank you for your question! The tub spout uses the RP12307 threaded or sweat on adapter, however you can convert it to a slip-on installation by purchasing the RP33794 adapter. The copper piping should be 2-4" from the finished wall for a slip-on installation. http://www.deltafaucet.com/repairparts/details/rp33794.html?showPhotoGallery=false Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2015-12-03

The instructions don't indicate this...I assume I can attach all of my 1/2" copper lines to the valve using compression sleeves and nuts instead of sweating the valve connections?  

Asked by: Mark
Thank you for your question, Mark! We recommend solder or 1/2" threaded unions as these are the most reliable. However, any connection that does not diminish the internal diameter of the pipe can be used. Best regards, Jon
Answered by: Delta Faucet
Date published: 2019-06-18
  • y_2019, m_10, d_18, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_144720, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 135ms
  • QUESTIONS, PRODUCT