Monitor® 14 Series Tub & Shower Trim
Sawyer™
Model#: 144766
144766 is rated
out of
5 by
4.
-
Water-Efficient
-
WaterSense® Labeled
- H2Okinetic Shower technology sculpts water into a unique pattern, forming a powerful drench spray
- Gives you the feeling of more water without using more water
- SpotShield Technology with antimicrobial protection of the finish resists odor-causing microbial growth on the finish
- Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your shower head and hand shower with the touch of a finger
- Spray settings include: H2OKinetic spray, Full Body spray
- Pause feature reduces water to a trickle, giving you space for shaving, lathering and other shower tasks while maintaining your temperature settings
- ADA compliant
- WaterSense® labeled showers use at least 20% less water than the industry standard—saving you money without compromising performance
Monitor®
H2Okinetic® Technology
Touch Clean
MultiChoice® Universal Valve
Installation Information
- Flow Rate: 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa
- Fittings Type: Universal fittings
- Supply Lines: Not Included
- Valve Type: Single-function pressure balance cartridge
- Spray Settings: Full Body Spray
- Pause
- H2Okinetic® Spray
Rated 4 out of
5
by
Maxxtorq from
Flood after install
Cartridge failed 6 hours after install and flooded my bathroom. I suspect that it was caused by the installer, when he sweated it in and still had the cartridge installed. Replaced the cartridge and haven’t had any problems since.
Date published: 2018-05-02
Rated 5 out of
5
by
Jealco from
Excellent Quality!
I just renewed my bath and I got this set for my shower. Looks nice!! Just a question, my hot water it’s not hotter as it used to be. I don’t know if you can calibrate it to get hotter water in the maximum position. Thanks!!
Date published: 2018-01-31
Rated 5 out of
5
by
Anthony232 from
SUPER SIMPLE! Great retro fit! Please read review!
Note, if you are replacing existing hardware pre 2006, you DO NOT have to change the plumbing in the wall, but do yourself a favor and buy a $40 replacement blender cartridge as well. The one that comes with this unit is JUST LIKE the existing assembly except one thing...the spacing of the Hot/Cold nipples in the back. I have attached a photo of the old valve below. I rebuilt it using the new valve...I swapped the new springs and all O-Rings.The new cartridge will NOT fit in your existing blender body in the wall, but that's ok, it's designed to work with the existing plumbing...you just have to reuse your blender valve. It's designed to do so, but is briefly mentioned in the manual...but I did not see mention of it on the box.
Date published: 2018-01-29
Rated 5 out of
5
by
Nito from
No issues, love it!
Very satisfied... Will recommend, product is well built and feels like it will last.
Date published: 2018-01-10
Why was it discontinued? Model#: 144766-SP
Thank you for your inquiry, Camel! The Lowes exclusive Delta Sawyer Tub and Shower 144766-SP faucet model is not discontinued.
https://www.deltafaucet.com/bathroom/product/144766-SP
Best regards,
Tanya
Date published: 2018-07-16
Question on Step B-3 (Copper Sweat Installation). Which side do I solder on the adapter? The side that has the O-Ring or the side of the threaded end?
Hello Daniel,
Thank you for your question. Step B-3 of the Maintenance/Installation document, regarding the different tub spout installs, shows the o-ring on the front side of the pipe and adapter. You would also solder the adapter to tube taking care to keep solder away from
O-ring area and groove. The o-ring should also be removed from the adapter before soldering.
Best regards,
Tanya
Date published: 2018-07-10
Will this work with a 1500 series delta?
Hi, E Kohl!
Thanks for your question! To better assist you with this inquiry, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2018-04-02
Is it possible to just get the shower head and control nozzle parts as our plumber already install Delta guts behind the tile. In the Sawyer bronze style.
Hello K6592,
Thank you for your question. The Delta Sawyer Tub and Shower 144766-RB model is only manufactured as a complete trim and valve faucet unit. The Sawyer collection does not have a shower only trim kit.
Best regards,
Tanya
Date published: 2018-03-25
can I get a hand held shower to match the sawyer line
Hi, Anng. Thank you for your question! We do not make a hand shower in the Sawyer collection, but we do have options with similar features. The Tesla collection has a rounded rectangular design.
https://www.deltafaucet.com/bathroom/showering/showerheads--handshowers?collections=Ribbon&collections=Tesla%C2%AE
There are a couple options to divert the water between the showering components. The first is an in-wall diverter. For this, you will need the R11000 Rough-In Valve and a Diverter Trim Kit to match your shower valve trim such as the T11852-SS. You will also need a supply elbow for the hand shower hose, such as the 50560. The second option is to use a shower arm diverter, such as the U4923-SS-PK or U4929-SS-PK.
Best regards,
Jon
Date published: 2018-03-06
How do you activate the pause feature?
Hello EB,
Thank you for your question. The shower head of the Delta Sawyer Tub and Shower 144766 faucet, has a lever on the side of that can be adjusted to the three settings Full Body Spray, Pause and H2Okinetic Spray.
Best regards,
Tanya
Date published: 2018-01-22
Can I use a hand wand with 144766SP in place of the tub fill ?
Can I use a hand wand such as Model # 75529SN with Model 144766SP in place of the tub fill ? I am remodeling our master bath shower. If so what else would I need ?
Thank you for your question, EC. You may install this unit without the tub spout. However, the bottom port must be capped as connecting a hand shower to the bottom port would cause water to flow from the hand shower and shower head at the same time. Instead, you will need to use a 3-setting diverter. There are a couple options to divert the water between the shower head and hand shower.
The first is an in-wall diverter. For this, you will need the R11000 Rough-In Valve and a Diverter Trim Kit to match your shower valve trim, such as the T11852-SS. You will also need a supply elbow for the hand shower hose, such as the 50560-SS.
The second diverter option is to use a shower arm diverter, such as the U4923-SS-PK or U4929-SS-PK.
Best regards,
Jon
Date published: 2017-10-02
