Monitor® 14 Series Tub & Shower Trim

Download Image

144984 is rated 3.5 out of 5 by 12.
  • y_2018, m_12, d_12, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_144984, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 12ms
Finish: Chrome
List Price*: $168.30
Base Parts
List Price*: $168.30
  • WaterSense certification promotes water conservation
  • Monitor pressure balance valve keeps water temperature within a safe +/-3degrees F (+/-1.6degrees C), helping to protect you from sudden changes in hot or cold water pressure
  • Soft, rubber spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your showerhead and handshower with the touch of a finger
  • Complete unit includes trim and rough-in
  • Single function operation
  • Single lever handle for ease of temperature control
  • Meets standards set by Americans with Disabilities Act (ADA)
  • Spray settings include: Full Body, Massaging, Soft Drench


Special Features

Installation Information

  • Flow Rate: 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa
  • Spout Length: 6"
  • Fittings Type: Universal fittings
  • Valve Type: Single-function pressure balance cartridge
  • Spray Settings: Full Body Spray
  • Massaging Spray
  • Drenching Spray
Rated 1 out of 5 by from Terrible faucet This was installed a week ago, the faucet continued to drip constantly. Then suddenly began spouting enormous amounts of water. It was taken apart and found that the seat blew out. Put it back together, leak continued and within two days the seat blew out again. I don't even know how this is possible. The faucet is brand new and is unusable
Date published: 2018-12-01
Rated 4 out of 5 by from Fourth delta I have three shower valves that all are the delta porter brushed nickle. They are a nice product. Just got a fourth, this one is the bronze porter. It is not installed yet. Water spots I have noticed though on the brushed nickle. I have a water softner and wipe all water after each use. I saw another person mention this to issue too.
Date published: 2018-10-31
Rated 2 out of 5 by from Not the best Don't remember when we installed this - sometime in the last 5-6 years. The spout started leaking early this year when the diverter is pulled up for the shower. It has got progressively worse and now we have as much water leaking from the spout as going up to the shower. My other bathroom has had a Moen for over 15 years and works fine.
Date published: 2018-10-04
Rated 3 out of 5 by from Looks great works well except drip. Happy with its looks and operation other than shower head still drips after being shout off 20-30 minutes
Date published: 2018-09-02
Rated 4 out of 5 by from single handle shower set february 2018 -- happy so far
Date published: 2018-02-21
Rated 4 out of 5 by from Great Look I really enjoy our new DELTA faucet. It is just the right touch for our new bathroom. Bronze gives just the right color with a white tile bath.
Date published: 2017-04-27
Rated 4 out of 5 by from Good Quality I bought this product since I have always had high performance with Delta products and replacement parts. Unfortunately, with this model, it spots very easily since we have hard well water. Also, I expected more water pressure with a larger shower head. Not so. Apparently, with clean water consumption regulations, it is only a 2.0 psi and not that great. more like a gentle rain shower. like the heavy quality and basic operation of hot and cold. has a hot water adjustment, so you can set it higher than normal.
Date published: 2017-01-30
Rated 4 out of 5 by from Decent product, but they don't make 'em like they used to. When I purchased my house twenty years ago, it had Delta faucets throughout. It's time to remodel, so we decided to stick with Delta. Delta is still a better than average brand, but the newer designed faucets are nowhere near the quality of the older ones. This is just a sign of the times. The actual problem I am having is that I replaced the old shower valve with the new one that came with this faucet. The valve assembly sticks out almost a full inch further than the old one. This makes the center trim sleeve an inch too short. I hope delta has an answer to this other than tear the wall apart and recess/replumb the valve.
Date published: 2017-01-23
  • y_2018, m_12, d_12, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_144984, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms

Increasing water pressure 144984

Need to know if 2.0 gpm cartdridge on porter 144984 can be replaced with a delta cartridge with 2.5 gpm or more. Pressure is coming into home is not the issue, we have high pressure on other faucets/sinks in home. Thanks.
Asked by: mavman70
Hi Mavman70, Thank you for your question. The cartridge in the model 144984 is rated at higher than 2.0 gpm. It is the showerhead itself that is rated at the 2 gallons per minute flow rate. You can switch out the showerhead to one with a greater flow rate. The connection is a standard 1/2" pipe connection. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-10-15

Rough-in Valve

Is the rough-in valve that came with this faucet compatible with the Leland Trim (Delta T14478-LHP Leland )?
Asked by: BoardmanConstruction
Thank you for your question! Yes, the rough-in included with the 144984 is the R10000 MultiChoice Valve, which will work with any tub/shower trim only kit. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2015-12-07

What size hole saw will I need for shower wall

The manual does not say
Asked by: Ceci
Thank you for your question, Ceci. For the valve body, we recommend using the plaster guard as a guide for cutting the hole. This would result in a 4" x 4" square hole. Please refer to the Installation Instructions for the rough-in valve for more information. https://media.deltafaucet.com/MandI/50353%20Rev%20J.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-09-27

I am remodeling my bathroom and the trim sleeve that came with the unit it 2.75 inches long and I am looking for a sleeve that is 3.5 inches long. The finish needs to be brushed nickel. Is there a sleeve?

Asked by: Michael
Thank you for your question. We do offer a longer trim sleeve in Stainless Steel as part number RP22735SS which is 3.5" in length and will work with 1400 series showers made prior to 2006. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP22735 Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-07-08

Can I buy just the shower head and if so how.

Asked by: Romey
Thank you for your question, Romey! The shower head for the Porter model 144984 is available for order as part number RP62171 from many of our retailers. https://www.deltafaucet.com/search-results?searchTerm=+RP62171 https://www.deltafaucet.com/where-to-buy/online-shopping Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-11-18

Just installed a delta shower control valve on a new shower; we did not see a place to adjust got water temp. Now after everything is finished and our first shower, only like warm water. Did I miss understanding it? Is there an adjustment?

Asked by: Ronlc
Thank you for your inquiry, Ronlc! If you are not getting hot enough water from your 13/14 Series shower unit, then you would need to adjust the rotational limit stop found on the top of your RP46074 cartridge. Please view the "How To Video" for adjusting your limit stop, in the below link. https://www.deltafaucet.com/cms/render/live/en/sites/delta/home/video-gallery/video-page.html?videoId=n2_uZ7wgV1I Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-06-09

what about the tub drain? do you have one that matches

Asked by: carl
Thank you for your question. Delta Faucet model # 144984-OB has a couple of bath waste assemblies that are similar in color but not exactly the same color. There is Delta Faucet model # RP691RB which is a trip lever. There is also Delta Faucet model # RP693RB which is a toe operated drain. This finish is a Venetian Bronze and it will compliment the Oil Rubbed Bronze but it is not exactly the same.
Answered by: Delta1
Date published: 2013-10-22

General Install ??

Hello, Is this model setup for new construction install or can it be used to replace an existing Delta fixture. The instructions seem point as a new install only?? Thanks
Asked by: Zen
Hi Zen, Thank you for your question! The 144984-BN does include the valve body for new construction installation. However, the trim can fit an existing 1300/1400 series ( old 1300/1400 cartridge has to be used with new trim). Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-02-02
  • y_2018, m_12, d_12, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_en_US, sid_144984, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 11ms