Allen bolt stripped - need replacement
I followed the procedure to soak a towel in vinegar and water and after purchasing a strip kit was able to remove the 3/32" allen bolt but now I need a replacement. Can you give me the exact dimensions for this bolt so I can find it in a local store or online? Thank you.
Asked by: Ryan
Hi Ryan, Thank you for your question. The handle set screw for the model 2530CB-24CB is a #10-32 X .25 long.
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2015-03-20
My faucet is a bit corroded from a hot water handle leak. Are there any faucets for purchase even though it's discontinued?
I have a matching second faucet (dual sinks in the bathroom) along with matching shower and tub faucets and don't want to have to buy 4 new faucets because one is corroding.
Asked by: Erika
Hi Erika, Thank you for your question. Unfortunately we do not have any of the model 2530CB-24CB faucets available any longer. The model was discontinued in 2010.
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2014-12-08
Need replacement Body
Model 2530CB-24CB Chrome Body is eaten away due to a leak on the cold water handle from salt in the soft water system. I am unable to find the part number.
Asked by: bill
Hi Bill, Thank you for your question. The body to the model 2530CB-24CB is the main part of the faucet and is not available as a separate item. The entire faucet would need to be replaced. If you are the original purchaser of the faucet and need warranty assistance please call our toll free Homeowner/Warranty line at 1-800-345-3358.
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2014-11-24
water leaks around the hot water handle when turn on how do I repair this?
Asked by: Roger
Hi Roger, Thank you for your question. You will want to make sure that the bonnet nut that holds the cartridge in the valve body is tight. If a loose bonnet nut is not causing the leak you will want to replace th RP25513 stem assembly and the RP4993 seats and springs. I have attached a link to the parts diagram for the model 2530 to help with your repair.
http://www.deltafaucet.com/customersupport/documentation/2530-24-_-24cb.html?document=pd&documentIndex=0#flashWrapper
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2014-11-21
allen wrench size
I have a bath two-handle center set faucet that is leaking. Unfortunately I cannot get the hex screw out of the handle so that I can get to the washer and spring. I checked your online video, and it says to use a ⅛" allen wrench, which is way too big for my faucet. I have tried several smaller sizes, but all seem to slip or not fit. Can you tell me what size to use? And if I can't remove these screws because they are either too corroded (only 15 years old) or stripped, what do I do?
Asked by: Mark S
Hi Mark, Thank you for your question. The handles on your model 2530-24 faucet should use a 3/32" allen wrench to remove the set screws. We recommend soaking a towel in a 50/50 solution of vinegar and water and wrapping the towel around the handle to allow the solution to soak in and break up the mineral build up. This should make removing the set screw/handle easier. If all else fails, the set screws can be drilled out and replaced. Be careful to not damage the threads on the handle while removing the set screws.
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2014-05-27
need the screw that connects the bronze part of the handle to the chrome part of the handle !!!!
Asked by: susan
Hi Susan, Thank you for your question. The spindle for the H24CB handle is the RP26852. This part can be ordered on deltafaucet.com.
http://www.deltafaucet.com/repairparts/details/rp26852.html
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2018-02-18
Where are these handles?
I would like to purchase just the BRASS toned handles for this discontinued bathroom sink faucet. What is the order code and where can I find them - preferably online?
Asked by: Pat
Hi Pat, Thank you for your question. The brass lever handle accents for your model 2530CB-24CB are available to be ordered. The part number is A24PB, the kit will ship 2 pieces. The A24PB can be purchased online.
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2014-04-23
Can I get chrome/silver handles for this faucet? 2530-24-_-24CB
Asked by: Mike
Hi Mike, Thank you for your question. The handles for the model 2430-24 24CB are available in chrome as H24 A24. To replace the brass accent piece only with chrome the part is the A24. Both parts are sold in pairs.
Thanks,
Dave
Answered by: DeltaFaucet2
Date published: 2014-04-07