When properly installed should the handles pull toward or away from you?
Thank you for your question. Delta Faucet model # 3553LF-SS has handles that turn towards the spout when turning the water on and away from the spout to turn it off.
Date published: 2016-07-07
The holes were made too big in the countertop for the handles. Is there anything we can do?
The faucet fits fine. Thanks
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. The hole size for each hole should be 1 5/16"~1 1/2" (33~38 mm). Here is a link to the technical specifications for this unit:
Unfortunately, there is not a repair part to fix the hole being larger than the required hole size. I do apologize for any inconvenience this may cause.
Date published: 2018-04-10
Delta lavatory faucet model number 3553LF-SS, will this faucet work for 3 cm granite
If not can it be retro fitted for 3cm use.
I purchased this product not realizing the specs stated it was ok for up to 29mm (just under 3cm for standard granite thickness). The faucet was installed in a granite vanity and after getting the handles pushed down all the way, it is working fine. I am not sure why Delta states it won't work.
Date published: 2014-05-03
What is the maximum deck thickness for installation?
What is the maximum deck thickness for installation? The spec sheet says 1 1/8" but I saw a post that this had been increased recently to accommodate thicker granite installations?
Hi Frustrated, Thank you for your question. In response to the trend of thicker counter top surfaces all of the recent and new wide spread lavatory faucets have a max deck thickness of 2-1/4". We offer the RP10612 for the models that need additional thickness.
Skill Level: Advanced
Read more: http://www.deltafaucet.com/repairparts/details/rp10612.html#ixzz3tszB8GhG
Thank you for your question! Out of the box, this unit works with a maximum deck thickness of 1 1/8". However, the RP10612 extension kit will add an extra inch to the maximum deck thickness.
Date published: 2015-12-11
is this faucet compatible for EU installation? id like to buy this faucet for an appartment in spain
renovating an appartment in Spain
Thank you for your question. You may need an adapter to connect the supply lines. The faucet has threaded 1/2"-14 NPSM supply fittings. You can verify whether this faucet will work in your installation by clicking the link below to view the Technical Specifications.
Date published: 2016-05-18
Even since install the hot and cold handles do not lie completely straight when in the off position. How do you adjust it?
Thank you for your question, embiidphila! The placement of the handles will rely on the valve orientation. If the base of the handle is not appropriately placed then the lever will also stop short of center. Please refer to diagram A and B in section 1 of the maintenance and installation manual for instructions. For further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at email@example.com.
Best regards, Edward
Date published: 2018-11-27