what size set screw is needed.
the set screw needs replacement,i dont know what size screw or allen wrench is needed. the handle has been removed as is the set screw
Hi tbo, Thank you for your question. The model 3555LF-216 faucet will use a 3/32" allen wrench to tighten and remove the handle set screws. The set screws are a #10-32 x .25 in size and is available to order as RP25620.
Date published: 2015-02-24
Victorian Lavatory Faucet 3555LF-216 and counter top thickness
Marble and Granite countertops are typically 1.25 inches thick. Can I use this faucet? Isn't there extension hardware to make this faucet work? If not, is there another Victorian faucet model that can be mounted on a 1.25 inch thick counter?
Hi Vee, Thank you for your question. The model 3555LF-216 has a max deck thickness of 1". The RP10612 extension kit will add 1" to the max deck thickness. We also have the 4" center version in the Victorian collection model 2555-MPU-DST that has a max deck thickness of 2-1/4".
Date published: 2015-01-05
Decorative screw available?
I have two of these faucets in my home, installed by a previous owner. I noticed before we moved in that the decorative screw on the back of the faucet was missing from one of the two faucets. Is it possible to order a replacement?
Hi Peter, Thank you for your question. If you are referring to the finial on top of the lift rod RP34410 then that part can be purchased at your local retailer or wholesaler that carries Delta products. I have attached the link to model 3555LF-216 parts diagram to insure you get the correct part needed.
Date published: 2013-11-19