Silverton

Two Handle Widespread Bathroom Faucet

Download Image

35713LF-RB is rated 2.7 out of 5 by 16.
  • y_2019, m_3, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_35713LF-RB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 95ms
  • REVIEWS, PRODUCT
  • 3-hole 6-16" installation
  • Includes pop-up drain assembly
  • Backed by Delta Faucet’s Lifetime Limited Warranty
  • WaterSense® Labeled
Finish: Venetian Bronze
List Price*: $267.75
Base Parts
35713LF-RB
List Price*: $267.75
The graceful arc and classic detailing of the Silverton Widespread 2-Handle Bathroom Faucet in SpotShield Venetian Bronze from Delta offers a sophisticated yet traditional aesthetic. SpotShield Technology means less spots and less cleaning. Its high-arc spout leaves ample clearance over the sink, while dual lever handles provide easy control over flow and temperature. WaterSense certified, it pairs beautifully with other pieces from the Silverton collection to create a stylish theme throughout your bathroom.
  • A relaxing elegance inspired by the retro silhouettes of classic American pottery

Special Features

Installation Information


3-hole 6"-16" installation


  • Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
  • Spout Height: 4-1/4"
  • Spout Length: 4-7/8"
  • Fittings Type: 1/2" IPS connection
  • Drain Type: Plastic pop-up
  • Valve Type: Washerless stem cartridge
Rated 1 out of 5 by from Don’t buy this faucet! - Handles Don’t just take my word for it. Read the other reviews about this faucet. There is clearly a manufacturing issues with these handles. The hole for the set screw is too high on the handle and doesn’t make good contact with the underlying hardware. Talked to Delta customer service who provided no solutions - other that instillation instructions.
Date published: 2019-01-21
Rated 1 out of 5 by from Worst faucet ever made. This faucet design specifically the handles is absolutely the worst faucet ever engineered and produced. Delta usually a good product should be ashamed.
Date published: 2019-01-01
Rated 2 out of 5 by from It looks nice I bought it a week a go and I installed it myself and I have the same problem everyone has with the handles , have to tighten it almost everyday
Date published: 2018-12-16
Rated 2 out of 5 by from great look I bought 2 of these for 2 of our bathrooms in 2016 I wish I never bought them!!! The set screw on the hot & cold handles never stays tight so you have to almost daily tighten them which is crazy
Date published: 2018-09-07
Rated 2 out of 5 by from Looks very nice, but the handle keeps falling off I bought two of these widemount Silverton faucets from Home Depot for my master bath. It’s only been a month and one of the handles has fallen off. I’m very surprised and extremely disappointed in the quality of these faucets.
Date published: 2018-06-14
Rated 1 out of 5 by from faucet handles are awful Besides the installation instructions being vague. The hot faucet does not stay on. My husband and I are constantly adjusting with an Allen wrench and the handle will not stay in place.
Date published: 2018-02-12
Rated 5 out of 5 by from This faucet looks beautiful. I love the look of this faucet. It looks more expensive than it is. The only complaint from the installer was that the instructions were not very good.
Date published: 2017-08-15
Rated 4 out of 5 by from Written instructions very poor, handles not labelled Bought this to install myself at HomeDepot. The written instructions are very poor, almost incomprehensible. The handles were not labelled H and C as indicated in the instructions. Therefore one must figure out which handle goes on which side or you will end up needing to turn lever away from sink to turn on, but its possible to figure this out by attaching handle and turning 90 degrees to on, and figure out which side it is. Had no problems with the handles, apparently the handles set deeply enough in order for the set screws to bite. I like the hook up set up, the long brass tubing to the water hook ups makes for easy access and tightening. The click-on connections from handle to spigot are nice and quick; they don't tell you how to DISCONNECT them; press IN on tabs to disconnect.
Date published: 2017-06-20
  • y_2019, m_3, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_35713LF-RB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT

how do I remove the clip on water lines

Asked by: ken
Thank you for your question, Ken! To remove the quick-connect hoses, squeeze tabs together, push up, then pull down. If you have removed the outer part of the clip, please reconnect it, making sure that the two tabs or "wings" are covering the square holes at the top of the connection. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-02-10

how do i remove the filter screen on a silverton faucet

Asked by: jim
You should be able to purchase a faucet aerator wrench. See attached Home Depot picture. This or something similar should come with the facet set.
Answered by: ShowmeState
Date published: 2018-11-26

installing handles -- 35713lf

No matter what I do the handle set screw will not secure handles on faucet. They keep coming loose. What's up with this? Having just read reviews this is common problem and there must be fix. Also why is there a 360 degree turn and water flows in two positions and must take care to ensure turned off faucet correctly.
Asked by: steve
Hi Steve, Thank you for contact us. Based on your description of the issue, the handles aren't going down far enough on the stem for the set screws to tighten against them. This can be corrected by loosening the mounting nut, then threading the handle base down further before attaching the handle. Once the handle is all the way down, it will turn 90 degrees from off to the fully open position. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-05-09

one of my handles spins 360 degrees.  it doesn't stop at 3 o'clock and 6 o'clock on the right handle.  is this going to affect me being able to shut the water off?  don't want to install on counter unless i know.

Asked by: laheys
Hello Laheys, Thank you for your inquiry! We would recommend making sure that the stops on the stem assemblies must point to the center of the faucet for proper handle rotation. Please see page 4 module 4 for correct handle rotation. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-12-10

My set screw came loose and none of my Allen wrenches are the correct size...what is the correct size for the set screw?

Asked by: Mike
Dear Mike, Thank you for your question! To remove the set screws (RP25620) from the handles of the Delta Silverton Lavatory 35713LF-ECO faucet, you would need a 3/32" Allen wrench. Best regards, Tanya
Answered by: Tanya
Date published: 2017-08-16
  • y_2019, m_3, d_20, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_35713LF-RB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 70ms
  • QUESTIONS, PRODUCT