Victorian®

Two Handle Widespread Bathroom Faucet

Download Image

35955-RB-DST is rated 2.3 out of 5 by 12.
  • y_2019, m_12, d_6, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_35955-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 35ms
  • REVIEWS, PRODUCT
  • Backed by Delta Faucet’s Lifetime Limited Warranty
  • WaterSense® Labeled
Finish: Venetian Bronze
List Price*: $514.30
Base Parts
35955-RB-DST
List Price*: $514.30
Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Delta WaterSense labeled faucets, showers and toilets use at least 20% less water than the industry standard—saving you money without compromising performance. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • 3-hole 4-16" installation
  • Plastic pop-up
  • ADA Compliant
  • WaterSense® labeled faucet uses at least 20% less water than the industry standard without compromising performance

Technology

Special Features

  • ADA Compliant

Installation Information


3-hole 4"-16" installation


  • Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
  • Fittings Type: 3/8" compression fittings
  • Drain Type: Plastic pop-up
  • Valve Type: DIAMOND Seal Valve
Rated 1 out of 5 by from Corrosion and leaks oh my!!! We have 5 sinks in our house with this faucet and I have had to have all 5 repaired by plumbers. We have had pieces changed out here and there and still after a year of dealing with this we are still getting leaks under our sinks. I am very disappointed in the craftsmanship of these very expensive faucets which are also ruining my cabinets under my sinks. I've had to purchase water leak sensors to place under all sinks too. We have always had delta in our homes, but I will have to think long and hard before I do that again.
Date published: 2019-09-26
Rated 1 out of 5 by from Corrosion and leaks Similar to many other reviews here, our faucets throughout the house have started to corrode and leak. They are only 9.5 years old and cost to replace is very high. They were regularly cleaned. Disappointed in what should be a high end product.
Date published: 2019-08-14
Rated 2 out of 5 by from Corrodes!! This looked great, but has begun to corrode and become discolored even with regular proper cleaning. I am Disappointed because the cost to replace it is a lot. We have the bronze color
Date published: 2019-07-31
Rated 1 out of 5 by from Finish Corroding and quick link supply lines suck. I have Delta products at all my properties. However, the bronze on the handles tarnish badly. Was tightening the faucet in our bathroom and one of the wire clips popped off the quick links. I’ve tried for hours to repair this with no results. Can’t even take it loose at the fitting and I installed it myself. Also, the local hardware stores don’t even carry this item in stock. I’m very disappointed. I’m having to purchase a new faucet because of a faulty few dollar part.
Date published: 2019-06-29
Rated 2 out of 5 by from Just disappointed We replace all our faucets in our bathrooms at the same time. This one has corroded unlike anything I have ever seen. We are refreshing the main bathroom and are stunned that the cost to replace the finished parts is so much and a new one is just way too much to risk again.
Date published: 2019-06-01
Rated 2 out of 5 by from Love the look, but corroded and have to replace 2 Had these installed with my new home build just over 5 years ago. Would expect more quality from Delta especially after seeing the price online to replace them and get the same look. The amount of corrosion that built up around the hex bolts locked them into place (stripped 3 or 4 handles trying to get them off) and I had to ruin the handles/valves to horse them off. Thought about just replacing the handles/valves/etc, but the corrosion elsewhere has made even the main faucets unsightly (and we get maid service weekly so not from lack of cleaning). Think I'll probably go a different route even though I love the look of these faucets.
Date published: 2019-03-24
Rated 2 out of 5 by from I've never seen a faucet corrode like this Looks great, but for some reason item corroded. Other faucet sets in the house have not corroded to include kitchen, second bathroom, and both shower faucet sets, only this set in the primary bathroom. Now I'm trying to see how to slow down the corrosion process in order to avoid having to replace them. I would suggest going with another finish.
Date published: 2019-03-12
Rated 3 out of 5 by from Good but drippy We have several of these fixtures throughout our home and have recently developed drips in three of them. Rather disappointing, as I had thought they would last longer than a few years.
Date published: 2019-03-09
  • y_2019, m_12, d_6, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_35955-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • REVIEWS, PRODUCT

what can be done to improve water pressure for this product?

Asked by: bh
Dear Bh, Thank you for your question. The Delta Victorian Lavatory 35955-RB-DST faucet is designed with a flow rate of 1.2 gpm. If you are getting a lower flow, you would want to remove and clean the aerator. Please see page 9 module 5 Maintenance section of the below document link. https://media.deltafaucet.com/MandI/77527%20Rev%20B.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2019-01-30

I am looking for a 35955-RB-DST Drain Assembly

Asked by: Bill
Hi, Bill! Thank you for your question. The pop up drain assembly for the Delta 35955-RB-DST faucet is part number RP62472. Here is a link to the unit: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP62472 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-03-16

We have this faucet in our house. The hot water faucet handle is broken, can we order just the handle or must we buy a whole new set?

Please respond ASAP this is our only lav sink
Asked by: Aletia
Hi Aletia, Thank you for your question. The replacement handles are sold in pairs, they cannot be purchased individually. The part number for the handles used on your model 35955-RB-DST faucet is H216RB. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-04-22

trying to replace leaking under handle - unit in use since 1999; the existing stem does not have set or springs - cannot determine what is replacement stem while searching the internet

Asked by: RJA1
Hi, RJA1! Thank you for your question. The Delta 35955-RB faucet from 1999 will use RP47422 stem unit assemblies. Here is a link to these stem unit assemblies: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP47422 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-11-12

Is this a 8inch widespread? Does it include everything to install? How do I know to know the demensions of the holes on my vanity? 

Asked by: Schme
Thank you for your question, Schme! The Delta model 35955-RB-DST is a 3-hole widespread model that will fit between 4"-16" installations and will include everything needed. The technical specifications sheet will have further measurements. https://media.deltafaucet.com/SpecSheet/dsp-l-35955-dst_C.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-03-27

Can you send me touch paint Venetian Bronze for touch up on shower track?

Asked by: Cassandra
Thank you for your question, Cassandra! Unfortunately we are unable to send touch up paint as our finishes are applied with a Physical Vapor Deposition process that can not be duplicated. Furthermore altering the product may cause further damage as well as void the warranty, however please feel free to contact us directly if you have questions about your finish options or need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-07-27

What is the part number for the extension kit that allows this faucet to be installed on thicker decks?

Asked by: 1workerman
Hi, 1workerman! Thank you for your question. Unfortunately, there is not an extension kit available for the 35955-RB-DST faucet. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-15

Just replace the stems and wanted to know if they are hot and cold specific

Asked by: Gerard
Thank you for your question, Gerard! Delta stem unit assemblies are not hot/cold specific however you will have to install them correctly in order for them to work properly. Please contact us directly if you have questions or need assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-05-08
  • y_2019, m_12, d_6, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_35955-RB-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 35ms
  • QUESTIONS, PRODUCT