Are there variations in the water supply connectors for this faucet?
One review I read said that one model he bought has screw-on handle-to-spout water lines and another (same model number)has clip on lines. If so, how do I tell which version I am purchasing?
You can't tell. There are faucet codes. They don't tell you this. The screw on types are better than the clip on types. I wrote a review myself about it. It has to be because they make the cheaper ones for the big box stores. These units should be purchased at a reputable plumbing supply house.
Date published: 2017-01-14
Bottom of Faucet Spout
What is the diameter of bottom of the faucet spout, which is in contact with top of a sink? The spec doesn't provide that information, in comparison to Lahara similar documentation.
Hi ZDelta, Thank you for your question.The diameter of the bottom of the spout on the model 35996LF-BN is 2-7/8".
Date published: 2015-02-20
Is there an extension? My countertop is 1 1/4 inch
Not enough room to secure faucets. Too tight to connect water supply after securing spout.
Make sure you have gaskets in right order. The white styrofoam (compressible) one goes under the countertop and the rubber gasket goes on top of countertop under handles. I found that by using a little glue to fix the white gasket to securing nut (has two tuning screws in it) that installation went well. My countertop is 1" so the above will only help the install process.
I am not aware of any extensions. Sorry.
Date published: 2014-04-05
Please send me a comparison of stainless vs. brilliance brushed nickle. Which one would be best to install in a bathroom with hard water? Which one r
I am comparing the windemere and mandara faucets and shower fixtures.
Hi - for me they are both nice, but brushed nickle has a better lustre and I think it will look nicer. I think stainless is a bit tougher to keep shiny.
Date published: 2013-10-22