List Price*:
$241.60
- 24" long
- 1 1/4" width
- Available in four decorative finishes
Special Features
-
Brilliance® Finish
-
ADA Compliant
Installation Information
Rated 5 out of
5
by
JD from
Excellent
Excellent product, sturdy, be sure to mount into wood backing, and think about adding an extra one on the opposite side
Date published: 2018-11-18
Rated 5 out of
5
by
GSS from
Beautiful!
Great-looking and a great price. Polished brass accessories are not terribly easy to find, so we were extra pleased to find these.
Date published: 2016-12-13
Rated 5 out of
5
by
BillB from
Outstanding Delta Quality
This shower bar is solid brass, exceptionally sturdy, and good looking. I'm glad I paid a little more and got the Delta. As far as installation goes it's easy but it MUST be anchored into wall studs. I found my household stud finder couldn't find the stud through the tile surface and had to go purchase one that specifically said it would deep scan through tile. I initially had thought about installing it vertically, centered on the shower wall, but couldn't due to the location of the studs. I installed it at about a 45" angle using adjacent studs and I'm glad I did since it made it easier to reach out and grab.
Shipping was prompt and product was well packaged.
Date published: 2015-10-02
Rated 5 out of
5
by
Tami from
Awesome grab bar!
Really like the look and feel of this, sturdy, elegant. Great item!
Date published: 2015-03-07
Thanks for the answer--but how come Delta makes 18 inch grab bars but not 16 inch ones--there are no house with 18 inch studs
Hi, Tomo!
Thank you for your question. Unfortunately, we do not make grab bars that are 16" in length. Here is a link to our available grab bars:
https://www.deltafaucet.com/bathroom/accessories/grab-bars
Best Regards,
Rosanna
Date published: 2018-12-05
Does this grab bar come in 18 inch ? what is the model number please?
Hi, Ernie!
Thank you for your question. We do not have the Delta 40024-SS ADA Grab Bar in an 18" option. We do have other ADA grab bars in the Brilliance Stainless Steel. Here is a link to these options:
https://www.deltafaucet.com/bathroom/accessories/grab-bars?facetFinish=stainless
Best Regards,
Rosanna
Date published: 2018-12-04
Does this 18" grab bar come in Venetian rub bronze? And what is the model number?
Hi, Ernie!
Thank you for your question. This is available in our Venetian Bronze finish. The model number is 40024-RB. Here is a link to this unit:
https://www.deltafaucet.com/bathroom/product/40024-RB
Best Regards,
Rosanna
Date published: 2018-12-04
What is the best method to remove the cover plates on the delta 24 inch ada grab bar.
Hi Ron,
Thank you for your question. The cover plates snap into place. You can pry them off by hand or carefully inserting a blade under the cover. Please keep in mind that the portion that meets the wall is not part of the cover and will not pry off.
Best regards,
Jon
Date published: 2016-01-15
How do you install this bar? The cover plate does not seem to be removeable.
Hi Kate, Thank you for your question. The cover plate on the model 40024-PB grab bar does come off to allow access to the mounting hardware. Here is a link to the installation manual.
http://www.deltafaucet.com/customersupport/documentation/40024-pb.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Thanks,
Dave
Date published: 2014-11-10
Matching grab bars
I have this grab bar as well as the matching one with slide bar for a hand held. I would like some in shorter lengths that match. I ordered 2 Silverton bars from Home Depot but they don't match & the parts that screw into the wall are too big compared with this item. Also, the shorter silverton bar has exposed screws while the little bit longer one has covered screws.
I'd REALLY like things to match! Are they available & I just can't find them?
Please answer quickly as I am remodeling the bathroom this week..
Thank you for your question. We do offer an 18" grab bar that has concealed mounting. We recommend Delta Faucet model # 41218-ST or 40118-SS.
Date published: 2018-06-06
Are the end brackets permanently attached to the grab bar? Or are they attached with set screws? I want to temporarily remove the end brackets, so that I can cut the bar itself to the exact length needed to mount onto the odd size stud spacing.
Hi, Steve!
Thank you for your question. The Delta 40024 Grab Bar cannot be cut as the ends cannot be removed. We do apologize for any inconvenience this may cause.
Best Regards,
Rosanna
Date published: 2019-06-14
How many inches does the bar extend from the wall once mounted?
Hello Mep, Thank you for your question.
The 40024 ADA grab bar extends approximately 3" from the wall.
Best regards,
Brandis
Date published: 2016-09-19
