Classic
Single Handle Centerset Bathroom Faucet
Model#: 500-WCS-DST
- Backed by Delta Faucet’s Lifetime Limited Warranty
-
WaterSense® Labeled
List Price*:
$155.65
You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Delta WaterSense labeled faucets, showers and toilets use at least 20% less water than the industry standard—saving you money without compromising performance.
*Industry standard is based on ASME A112.18.1 of 500,000 cycles.
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- 2 or 3-hole 4" installation
- ADA Compliant
- WaterSense labeled faucet uses at least 20% less water than the industry standard without compromising performance
- Rigid spout
DIAMOND™ Seal Technology
Installation Information
2 or 3-hole 4" installation
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Fittings Type: 3/8" compression fittings
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
I need dimensions of the 500 and 501 models.
Due to the installation of a large recessed medicine cabinet, we have only 6" vertical space for out faucet from the sink surface to the bottom of the cabinet doors when being opened.
Is the single lever chrome plated 500 or 501 low enough that the overall height, when shut off, is 6" or less?
Is the faucet available with pop up?
Our sink is an American Standard porcelain sink with 3 holes. The outside holes are on 4" centers.
Hi Tester,
Thank you for your question. The model 500/501 handle is 4-7/8" tall in the off position, 6-9/16" when fully on. The acrylic knob version of this model has a max knob height of 5-1/2". To get the faucet with the pop up the models would be 520-DST for the lever handle, and 522-DST for the acrylic konb handle.
Thanks,
Dave
Date published: 2013-10-22
What is Delta Model Number with a 9in water intake line for bathroom faucet, single handle, 4in center set.
Trying to replace two older same model Delta Bathroom Faucets. Neither one has a model number on them. They are 4in Centerset 1-Handle Low-Arc in Chrome. I already bought Model Number B510LF-PPU thinking it would fit, but the water supply line is too short. The ones Im trying to replace have a 9 inch copper water line, and the Delta Model B510LF-PPU I just bought has a 5 1/2 inch copper water line.
Can you please advise a replace model that has a 9 inch copper water line intake line so I dont have to purchase entension lines in both bathrooms.
Thank you for your question. We do not have a specific model that has 9 inch copper lines. However any of our new DST models come supplied with 36 inch supply lines so they should work with your application. Look for a model number that ends in DST.
Date published: 2013-10-22
does the WCS version include the drain that the stopper would go into? Does that drain include overflow connection?
Thank you for your inquiry, JJPNCSU! The Delta Classic Lavatory 500-WCS-DST faucet does not come with a Pop-Up/Drain assembly. This unit just comes with a chain and stopper.
https://media.deltafaucet.com/SpecSheet/DSP-L-500-DST%20Rev%20J.pdf
Best regards,
Tanya
Date published: 2018-05-02
Featured Accessories
RELATED PRODUCTS View Collection
