Single Handle Centerset Lavatory Faucet
Classic
Model#: 501-DST
Classic Single Handle Centerset Lavatory Faucet is rated
out of
5 by
2.
-
Water-Efficient
-
No-Lead Compliant
-
WaterSense® Labeled
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- 3-hole 4" installation
- Less pop-up
- ADA Compliant
- WaterSense® labeled faucet uses at least 20% less water than the industry standard without compromising performance
- Rigid spout
DIAMOND™ Seal Technology
Installation Information
3-hole 4" installation
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Spout Height: 1-11/16"
- Spout Length: 5"
- Fittings Type: 3/8" compression fittings
- Drain Type: Less pop-up
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
Rated 1 out of
5
by
TAG1977 from
This product doesn't seem to fit the Delta Reputation.
We have installed (7) of these faucets in our church over the past few years during remodeling, but out of the (7) there are only (3) of them that have not started leaking internally and down the hoses that are attached to these faucets by design. Out of the (4) that have been replaced in 2017, (2) of them have been replaced more than once. That being said I have replaced a total of (7) of them that developed these same leaking issues. Sometimes after several months, and at least one in less than one month. The good news is that the local distributor that I purchased these from keeps replacing them for us at no charge to us, but the bad news is I have to keep installing faucets.
Date published: 2017-06-20
Rated 1 out of
5
by
TexC from
2nd faucet in our facility to leak from inside
cheap quality, was not expecting this from delta. we renovated 3 bathrooms in the plant, all using this same faucet, and this is the 2nd faucet to develop a leak from inside the faucet. it has plastic tubes coming out, that appear to be pushed up onto barbs, or maybe glued into place. Im not a fan of all of these new faucets coming out with plastic tubes versus the older style of hoses being installed to the faucet.
Date published: 2016-07-06
What is the difference between the 500-DST and the 501-DST?
Hi, aaronforjesus!
Thank you for your question. There is no difference between the 500-DST and the 501-DST. Pricing, parts, and features are all the same between each faucet.
Best Regards,
Rosanna
Date published: 2018-02-16
USA garden hose adapter?
Do you sell a fitting that will allow me to attach a standard US garden hose to this faucet? I can temporarily remove the aerator if necessary.
Hi, Dave!
Thank you for your question. The RP51505 adapter can be used for this faucet to be able to attach a garden hose. Here is a link to the part:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51505
Best Regards,
Rosanna
Date published: 2017-09-11
what size holes do I drill for the D501DST ?
Thank you for your question. While we do not recommend drilling the holes for Delta Faucet model # 501-DST until you have the product, we do understand that sometimes that is not possible. We have included the spec sheet for this product below.
http://www.deltafaucet.com/customersupport/documentation/501-dst.html?document=ts&documentIndex=0#flashWrapper
Date published: 2013-10-22
