My contractor installed the adjustable slide upside down on the bar and I cannot see how to take it apart to turn it over. The hand shower will not fit into the holder the way it is.
There is a cap cover at the top and bottom of the Sliding Bar - remove these covers (cover just snaps into place, therefore all you need to do is pry the cover off with a small screw driver or small pry bar - be careful you don't scratch the surface of the Sliding Bar).
Underneath the caps, you will see the screws that are used to hold the bar in place - there should be 2 screws at the top and 2 more at the bottom. Remove the screws and the bar should come right off. NOTE: Your contractor may have used some silicone caulk to "waterproof" the install - this caulk will act like glue that you may need to also remove to "release" the Sliding Bar.
Once the Sliding Bar is released, you should be able to easily reverse you Mounting Bracket.
Good Luck - this is a fairly easy fix.
Date published: 2014-11-22