Single Handle Bathroom Faucet

Ashlyn®

Model#: 564-SSMPU-DST
Ashlyn Single Handle Lavatory Faucet is rated 4.6 out of 5 by 12.
  • y_2018, m_6, d_17, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_564-SSMPU-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 42ms
  • REVIEWS, PRODUCT

Download Image


Compare Favorite Add To A Project View my Items image/svg+xml Print
Finish: Stainless
List Price (US $):
$297.85

BASE PARTS
564-SSMPU-DST
$297.85

  • Water-Efficient
  • No-Lead Compliant
  • WaterSense® Labeled
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 4" installation
  • Metal pop-up
  • ADA Compliant
  • WaterSense® labeled faucet uses at least 20% less water than the industry standard without compromising performance
  • Rigid spout

Technology

Special Features

Installation Information


1 or 3-hole 4" installation


  • Escutcheon: Optional 6" Escutcheon
  • Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
  • Spout Height: 6-11/16"
  • Spout Length: 5-1/8"
  • Fittings Type: 3/8" compression fittings
  • Drain Type: Metal pop-up
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: DIAMOND Seal Valve
Rated 3 out of 5 by from Drain is not a pop up as stated! The faucet came with a standard Rear rod lift for the drain and it comes way to close to my back splash to operate properly. Now I must buy a true pop up and have it installed if I keep the faucet which is quite nice and works well. Any suggestions
Date published: 2018-01-22
Rated 4 out of 5 by from Modern look Faucet made of good quality material. Only drawback is that it is a little hard to adjust the flow and mixture.
Date published: 2017-06-16
Rated 5 out of 5 by from Transitional lines I have used the Delta Ashlyn line in several of my design renovations. It has clean lines yet gives a transitional look with the slight curve of the design. This works well for many of my clients as we are working on updates throughout their homes. I will be using this product again on future jobs!
Date published: 2017-05-31
Rated 4 out of 5 by from Very Sleek/Modern Look Used this as part of a bathroom remodel. Used it without the base plate to assist with the clean lines and sleekness of the "modern" bathroom we were going for. It's been about 2 years and have yet to be disappointed.
Date published: 2017-05-26
Rated 5 out of 5 by from GREAT DESIGN THE DESIGN IS SO ELEGANT AND SIMPLE! WORKS PERFECT! WOULD BUY AGAIN
Date published: 2017-05-25
Rated 5 out of 5 by from the original faucet had the wrong gasket for the pivot rod. However with one phone call a replacement was shipped out installation was a snap. Wrong gasket was sent with original faucet (for pivot rod). however with a phone call a new gasket was sent free of charge.
Date published: 2017-04-01
  • y_2018, m_6, d_17, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_564-SSMPU-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 34ms
  • REVIEWS, PRODUCT

The Hit water flow is weak and not very hot . Could you tell me if there is an adjustment I do not see?

Asked by: PJW5
Hi, PJW5! Thank you for your question, and I am sorry to hear that you are experiencing some issues with your Delta faucet. There is an adjustment to be able to make your faucet give hotter water. To do this, remove your handle and you will find the stem of the cartridge assembly. There is a switch on the cartridge located above the stem. Switch this to the left side. This will allow the hottest water. This will not adjust the flow for your hot water, however. For low flow at your hot side, we recommend to flush the supply lines for the flow issue. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you still have issues, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-29

Does the Ashlyn line have an "all brass body" or does it have plastic or nylon components? If so which of your products have an all brass body?

Asked by: V12345
Hello V12345, Thank you for your question. The Delta Ashlyn Lavatory 564-MPU-DST faucet uses either metal and plastic combination or a proprietary mixture of components so that the product has a high quality, while maintaining safety control with the various temperatures of water that go through the product. For safety reason we do not manufacture an "All Brass" faucet. Delta Faucet Company takes extreme pride in the quality of its products, and strives daily to meet and exceed the expectations of our customers. Best regards, Tanya
Answered by: Tanya
Date published: 2018-02-26

Any difference in quality/construction based on the retailer?

Hi, is there any difference in this faucet purchased from a big box store like Lowe's as compared to a plumbing supply store like Ferguson? My plumber told me that the ones at Lowe's use cheaper materials, and the much lower price at Lowe's than even the cheapest online plumbing supply store supports this, but they appear to have the exact same model number and specs. Also, does it carry the same warranty from Delta regardless of where it was purchased?
Asked by: Kren
Hi, Kren! Thank you for your question. The 564-SSMPU-DST will be the same exact make and quality where ever you choose to purchase the faucet at. The Lifetime Limited Warranty is the same regardless of where you choose to buy the faucet. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-01-20

It there an option to get rid of the red/blue temperature dot?

Wondering if that can pop out and have something else in that spot or if it leaves an exposed screw? I think the colored dot makes it look a bit cheap, and most people know how to find hot and cold. Thanks.
Asked by: RINDY
Hi RINDY, Thank you for your question. Unfortunately, we do not make another button for the handle. You can remove the button, however, we recommend to keep it in place as it will prevent buildup from forming around the set screw. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-09-19

Does the lever have a small turn radius?

We recently received this faucet and noticed the lever has a very small turn radius. It seems it would be very difficult to control the temperature with such a small radius. Is this by design and is the lever sensitive to small adjustments?
Asked by: hawaii808
Yes and it takes some getting used to.
Answered by: Gasdawg
Date published: 2017-12-16

What is the finish on the 564SSMPUDST? Is it "brushed" or "brilliant"

Can't tell from the brochure if this faucet has a "brushed" or "brilliant" stainless steel finish. Please advise.
Asked by: ROBERT
Hello Robert, Thank you for your question. The 564-SSMPU-DST single handle lavatory faucet is in the Brilliance Stainless Steel finish. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-09-06

There is an issue concerning the Ashlynn single handle faucet drain stop lever position so much at stake to have this issue confronted soon. I reall

I really had my mind made up and wish could still buy the Ashlynn single handle lav faucet Told by marble installer specialist that the pull out angle type of drain stop lever will not have enough space from tile of back wall. We will have 20 inch deep vanity counter and undermount sink and 13/16 thick marble splash. What to do. He said many people have same issues. Only can use top drain stop handle or pull handle that goes straight up. ASAP. Ths
Asked by: Honorine
Hi Honorine, Thank you for your question. The faucet requires a 1 1/4" minimum clearance to the backsplash. It may help to use a flexible lift rod such as the RP75526 in your installation. http://www.deltafaucet.com/repairparts/details/rp75526.html Alternatively, you can install a push pop-up assembly and cap the lift rod hole on the back of the spout with the included button. http://www.deltafaucet.com/search/results.html?q=push+pop+Chrome&num=20 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-06-30

what are the two extra tubes for?

there's four tubes coming out - looks like two supply lines plus two more that just get connected together? Whats that?
Asked by: john
Hello John, Thank you for your question! That is an outlet connector and spout hose as explained the instructions for this model. It is present because of the design and shape of the faucet.
Answered by: DeltaFaucet4
Date published: 2017-01-09
  • y_2018, m_6, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_564-SSMPU-DST, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 18ms
  • QUESTIONS, PRODUCT