- 1 or 3-hole 4" installation
- Includes deck plate to support 3-hole installation
- Backed by Delta Faucet’s Lifetime Limited Warranty
-
WaterSense® Labeled
List Price*:
$379.30
With defined geometric angles and edges, the Ara Bath Collection creates a streamlined look of contemporary elegance. Matte Black makes a statement in your space, cultivating a sophisticated air and coordinating flawlessly with most other fixtures and accents. With bright tones, Matte Black is undeniably modern with a strong contrast, but it can complement traditional or transitional spaces just as well when paired against warm nuetrals for a rustic feel akin to cast iron. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
- Laminar flow lends a beautiful, refined look that complements the design of the faucet
- 1 or 3-hole 4" installation
- Less pop-up
- ADA Compliant
- Standard spout
- Water-efficient faucet helps you conserve water and protect one of Earth’s most valuable natural resources
Special Features
-
ADA Compliant
Installation Information
1 or 3-hole 4" installation
- Escutcheon: Optional Escutcheon Included
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Spout Height: 6-3/8"
- Spout Length: 5-3/8"
- Fittings Type: 3/8" compression fittings
- Drain Type: Less pop-up
- Deck Thickness: 2.25"
- Supply Lines: 32" minimum InnoFlex® supply lines below the deck included
- Valve Type: Ceramic valve
Rated 2 out of
5
by
the_helf from
Meh
Don't get me wrong they look great, that said they are made so cheaply that i'm surprised that any american company would put their name on it.
The flow rate is half of what it should be considering its not a waterfall model, and frankly this model falls short on everything but how it looks.
I would not recommend that you get this model at all, its the second biggest mistake with my new faucets, the first being the waterfall version of this model. [This review was collected as part of a promotion.]
Date published: 2019-05-25
Rated 2 out of
5
by
CC from
like the style. Too short of reach. Terrible water flow.
I'm a designer so it blows me away when i have to find the things that the products designers completely missed. I like the look and the styling of the faucet. However The aerator is rectangular and the water sprays a criss cross pattern and splashes everywhere. With the short spout reach water splashes on the counter whenever you put something in the water stream. I cannot find a faucet that extends more towards the center of the drain away form the back to minimize splashing. A straight water stream and a couple more inches of reach and this would be one of the best modern looking faucets. Delta, if you need a designer that won't overlook the things users will complain about get in touch.
Date published: 2019-04-29
Rated 3 out of
5
by
Hildawn from
Love the style! Not impressed with performance.
We recently remodeled our master bathroom and bought these faucets for the sink. We have been using them for just over a month and while I love how they look and the styling of them, I do not like them when I use them. The aerator is rectangular and the water sprays everywhere whenever you put something in the water stream. I have tried moving my hands around in the sink and different heights close to and away from the faucet. It doesn't matter how hard I have the water turned on, no matter what the water just splashes everywhere. Also because the spout of the faucet is flat, water sits on it. When I wash my hands I use the towel to dry my hands and then have to wipe off the faucet so it doesn't have dry water spots on it all the time.
Date published: 2019-03-06
Can you have separate hot and cold by turning faucet? or does it only mix? If only mix which single hole do not?
Thank you for your question, Mungie! The handle will rotate to change the temperature between full hot, mixed, or full cold and tilts up and down to control the volume.
Best regards, Jon
Date published: 2019-04-10
Does the LPU until have the lift slider on the back?
I have another drain system in my sink which I want to keep, so I don't need the lift in the back. Does this "less pop-up" unit still have the lift lever/slider, and is it required (or a "dummy plate" provided)?
Hi Shagate,
Thank you for your question. The LPU version of the faucet does not come with a lift rod and slider.
Best regards,
Jon
Date published: 2017-04-20
Since this model doesn't have the slide and pop-up drain attachment, is the back of the faucet completely smooth and finished, with no hole?
Thank you for your inquiry! Bethy! Correct, the Delta Ara Lavatory 567LF-SSLPU faucet would not have a hole or lift rod knob on the back side of it.
Best regards,
Tanya
Date published: 2018-01-16
Does this 567LF-LPU require a 2 1/2” clearance to back splash since it has a smooth back with no pop up knob?
Hello Jane,
Thank you for your question. Yes, we still recommend a minimum of 2 1/2" (64 mm)
clearance to the back splash, for proper spacing above and below the sink.
https://media.deltafaucet.com/SpecSheet/dsp-l-567lf-mpu_F.pdf
Best regards,
Tanya
Date published: 2018-09-25
This faucet has the lift rod built in? Don't see it the picture.
Hi Newhomeowner, Thank you for your question!
The model 567LF-LPU ( less pop up assembly) Does not include a popup drain or lift rod. Both items have to be purchased separately. Below is the link to the installation guide for the unit:
http://www.deltafaucet.com/customersupport/documentation/567lf-sslpu.html?document=mi&documentIndex=0#flashWrapper
Best regards,
Brandis
Date published: 2016-03-24
Your Faucet 567LF-SSLPU ...What about matching pop-up
Hello,
Thanks for your question. The parts diagram for this faucet indicates both RP38958 and RP26533.
I hope this helps!
Best Regards,
Justin
Date published: 2017-08-12
Does this come with an integral pull rod for a drain. Is it compatible with a pop up drain.
Hi, Dave!
Thank you for your question. The Delta 567LF-SSLPU faucet does not include a drain assembly or lift rod. We recommend either the 72172-SS (without overflow holes) or 72173-SS (with overflow holes). Here are the links to each:
https://www.deltafaucet.com/parts-product-detail?modelNumber=72172-SS
https://www.deltafaucet.com/parts-product-detail?modelNumber=72173-SS
Best Regards,
Rosanna
Date published: 2019-01-09
How do you remove the aerator to clean out debris.
Hi, Gaiau!
Thank you for your question. The aerator for the Delta 567LF-SSLPU faucet can be removed by simply pulling the aerator straight down firmly from the spout assembly. Clean the aerator by soaking in a solution of 50% white vinegar and 50% water mix for an hour or even overnight.
Best Regards,
Rosanna
Date published: 2019-03-01
Featured Accessories
RELATED PRODUCTS View Collection
