Delta Faucet 567LF-SSPP How do you remove water spots from this faucet?
Thank you for you question. Normally, we recommend to always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
Date published: 2017-07-08
what shower valve goes with this?
Thank you for your question. This faucet will coordinate with the Ara or Vero collection (link below).
Date published: 2017-06-14
Roman tub fixtures?
Do you have fixtures in this line, or similar line, that would go with roman tub? How about shower fixtures?
Thank you for your inquiry! The Delta Lavatory 567LF-PP is apart of the Ara collection. Please review the Ara bathroom collection for roman tub, shower and tub/shower faucets, in the below link.These faucet are also offered in several finishes.
Date published: 2017-05-22
Is this available without a pop-up assembly?
I have a wide basin sink with two faucets and only one drain so I need faucets without a pop up and just use a push down drain.
Thank you for your question. We do not currently make a PP (Project Pack) version of the faucet that does not include a pop-up assembly. However, the model 567LF-LPU does not include a drain assembly.
Please click the link below to browse our selection of push pop-up drain assemblies.
Date published: 2017-05-09
Water supply lines
I looked at the specifications of the supply lines that are included and it stated they are 14/12 inches long. Is there any way to change them since I need lines longer than that length.
Thank you for your question. The supply lines on the Delta Ara 567LF-SSPP are not designed to be removed or replaced. However, we do make a Delta Ara Vessel 767LF-SS faucet that has 35" (889 mm) and 36" (914 mm).
Date published: 2017-04-22
What are the aerator thread specs?
What are the thread specs for the aerator?
For example, is it a 15/16" x 27 Male Thread?
Thank you for your question. The Delta Modern Lavatory 567LF-PP faucet has a 15/16"-27 male thread aerator assembly.
Date published: 2017-03-18
Hole size needed
Good day folks - we purchased this faucet to go with a kohler "vessel style" sink
We checked the height clearances and we will be fine
The faucet will be installed directly through the countertop - not the sink - so we wonder what size hole do we need to punch through the marble
Thanks for your time and consideration
Thank you for your question. The Technical Specifications for the Delta Modern Lavatory 567LF-PP faucet shows a hole size of 1 1/4"-1 1/2" (32-38 mm).
Date published: 2017-01-28
Will escutcheon (part number RP78358) cover a 8" centerset?
We bought this for a vanity top with a predrilled 8" centerset faucet setup. That means the the base plate or "Escutcheon" needs to be 9".
Will part number RP78358 cover the holes? If not, is there a part number that will with this faucet? Thanks.
Thank you for your question! This escutcheon plate is only 6" long and it is meant to be used as a 4" center install. Unfortunately, we do not have any longer escutcheon plates that will work as an 8" center install.
Date published: 2016-10-06