Single Handle Lavatory Faucet - Metal Pop-Up
Leland®
Model#: 578-MPU-DST
Leland Single Handle Lavatory Faucet - Metal Pop-Up is rated
out of
5 by
9.
Discontinued
Compare
Favorite
Add To A Project
View my Items
Print
Finish: Chrome
Finish: Chrome
List Price (US $):
$238.00
BASE PARTS
578-MPU-DST
$238.00
-
Water-Efficient
-
No-Lead Compliant
-
WaterSense® Labeled
- WaterSense® certification promotes water conservation
- DIAMOND Seal® Technology features a valve embedded with diamonds to ensure like-new operation for the life of the faucet
- Includes optional 6-1/4 in. escutcheon for 3 hole installations
- Includes matching finish drain assembly
- Meets standards set by Americans with Disabilities Act (ADA)
- 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa
- 1 or 3-hole 4 in. installation
- Standard spout
DIAMOND™ Seal Technology
Installation Information
1 or 3-hole 4" installation
- Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa
- Fittings Type: PEX
- Drain Type: Metal pop-up
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
Rated 3 out of
5
by
zbine3 from
Lasted about a week before I had to replace it
I really liked this faucet but it would not shut off completely unless the handle was in the correct position. Several times a slow steady stream of hot water would come out of the faucet after it was shut off. I replaced it with a Grohe and have not any more issues.
Date published: 2016-05-07
Rated 5 out of
5
by
mcddelta from
Over kill
I wanted some one to look at the base of the faucets to correct the problem . I did not want a hold new faucet.
Date published: 2015-05-03
Rated 5 out of
5
by
Gumwood from
Noise issue
The product does everything that I was looking for, with the exception of 1 thing. When the faucet is turned on it sounds like a freight train. Why would this make so much noise? Otherwise it works perfectly.
Date published: 2015-04-14
Rated 4 out of
5
by
afdgagfdas from
Looks good.
The faucet looks good with the towel holder and towel ring we bought to go in our guest bathroom. My only complaint is that the water when flowing at half volume us louder than the original faucet. When it is wide open it quiets down.
Date published: 2013-01-13
Rated 5 out of
5
by
Do it your selfer from
Perfect in every way!
Easy to use, easy to install. Own four of them.
Date published: 2011-04-16
Rated 5 out of
5
by
Kerry from
Attractive, well engineered faucet
THis attractive faucet is well built.
Date published: 2011-04-11
How can I remove the metal stopper in the sink bottom to clean out drain?
Hello Mona,
Thanks for your question! Here is a How to Video on removing a pop up assembly:
http://www.deltafaucet.com/shopping-tools/research/video-gallery/video.html?v=2c04YZbvWuE&cat=
I hope this helps!
Date published: 2016-01-26
crimp on brass pipe
Hi, I purchased a leland faucet and the brass tube is crimped...it has a tag on it that reads...tube crimped intentionally for improve installation in sinks with smaller holes,..is this a fact...or has the seller done this himself? It is on the hot water side...will it effect the water flow?
The faucet is so beautiful...I hope this is a delta decision and not a 'seconds' fixture I have just purchased...thanks for any help...I can send photo if necessay
Thank you for your question. Delta Faucet model # 578-MPU-DST may have that tag on it. It should be crimped.
Date published: 2013-10-22
what is the exact measurements of the plate for this faucet
I am replacing our existing vanity faucets but am limited to having a plate to cover up the 3 holes existing faucets, which also have a plate under them - so want to make sure that this model plate will cover the same area as existing one. thanks for your help!
Thank you for your question. Delta Faucet model #578-MPU-DST is 6.2 inches long and 2.6 inches wide.
Date published: 2013-10-22
