Thank you for your question. Here is the cleaning and care information from Maintenance/Installation paperwork:
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains and calcium build up may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. Also take care to protect surfaces that may be damaged by vinegar. The white vinegar can stain porous stones like granite, limestone and marble.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: 409, Fantastic, or Windex, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub and Tile Cleaner, Lime Away and Soft Scrub.
Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
Avoid harsh abrasives or polishes.
Avoid bleach-based cleaners.
Date published: 2017-02-14