Will it hurt the brushed nickel to put a light oil on it to protect from spotting and deposits?
We have hard water and I would like to protect my fixtures with a light oil.
Thank you for your question. We recommend blotting the faucet dry after use to prevent water spots and mineral buildup. You can also use a 50/50 solution of white vinegar and water to remove spots and finger prints.
You may apply Pledge furniture polish on Chrome or Brilliance finishes for a water-resistant surface.
Date published: 2017-06-06
how do I get the stopper out & retrieve something that fell in?
Thank you for your question. If a stopper does not lift straight out, it is being held in by the horizontal rod. Behind the drain pipe under the sink is a horizontal rod connected to the lift rod via the strap. The horizontal rod is held in place by a nut. Remove the nut and pull the horizontal rod straight away from the pipe about an inch. The stopper should now come free of the drain.
Date published: 2017-01-09
If a faucet model comes with a pop-up drain, is there any way to get the same model but without the pop-up drain?
The sink I am using has a grid drain, so the pop-up drain that comes with most of the lavatory faucets is not needed. Can I get the same model but without the pop-up drain?
Hi, Bobby! Thank you for your question.
The faucet, 592-DST, is only available with a pop-up drain assembly. There isn't an option without the pop-up drain assembly.
Date published: 2016-07-21
I need a plug button for the opening behind my Addison bathroom sink single lever faucet.
The single hole drilled in my two granite vanities is too close to the sink and too close to the backsplash to change location for faucet, resulting in the lift rod for sink stopper to work. Moen offers a plug button for the lift rod hole in rear of their single faucets. I liked the Addison style over the Moen models. I noticed that over a year ago Ron had the same question. Surely it wouldn't be a great technological issue to create this plug button for customers such as ourselves instead of leaving a non functioning lever in rear of faucet, confusing people using the sink.
Hi Tngal2, Thank you for your question!
At this time we do not manufacture a hole cover for the lift rod opening on the 592-DST faucet. My recommendation is to order a push pop drain and leave the lift rod in for decorative purposes.
Date published: 2016-07-18