re: question about problems with the lift rod not being operable if there isn't enough space between the faucet and backsplash --what is the solution
I'd like to know before buying this faucet.
Thank you for your question. Delta Faucet model # 592-DST has to have 2-1/2 inches from the faucet to the backsplash for the lift rod to operate correctly. If you do not have this distance, then you will not be able to fully close your pop-up assembly.
Date published: 2013-10-22
Cover for Lift Rod Hole in back of Faucet
I prefer the drain style that you push closed and pop open manually (with your finger) as opposed to one controlled with the Lift Rod. Is there some sort of insert or cover that Delta sells that would cover the hole where the lift rod goes so the hole is not visible (could leave the Lift Rod in the hole but would just make it confusing on how to open and close the drain).
Hi Ben, Thank you for your question. Unfortunately we do not offer a lift rod hole cover for the model 592-DST.
Date published: 2015-04-29
Sudden reduction in water flow
Recently had new vanity installed with Delta Addison single handle center hole faucet installed.
While using the sink, the laundry was running in another part of the house. Suddenly the water flow dropped, and has not returned.
House sink aerators haven't been a problem before, but I suppose there could be accumulation.
How do I clean the faucet?
Hi Karl, Thank you for your question. Your model 592-DST faucet would have come with a small blue t-shaped wrench that will fit onto the aerator to unscrew it. This wrench can clip to the supply lines under the sink for storage. If you are missing the wrench it is available to order as the RP52217.
Remove the aerator and turn the faucet on to flush the lines. Check to make sure that there is no debris on the valve assembly.You may also want to check that the blockage is not in the shut off/stop valves under the sink.
Date published: 2014-10-28
What are the dimensions (length, max. width) of the escutcheon?
Thank you for your question. The escutcheon plate is 5 3/4" long and 2 1/2" front to back.
Date published: 2016-05-31
I need quick connect to connect apartment style washer mashine to the faucet
The existing quick connects (3/4) and those that I could find in Home depot and Lewe's have different size/thread. Where I cold get quick connect for 592-DST?
Hi Alexzu, Thank you for your question. Unfortunately we do not offer a cache aerator adapter that fits the model 592-DST. The faucet aerator cannot be adapted to work with the apartment style washing machine hook up.
Date published: 2014-06-13
I need a plug button for the opening behind my Addison bathroom sink single lever faucet.
The single hole drilled in my two granite vanities is too close to the sink and too close to the backsplash to change location for faucet, resulting in the lift rod for sink stopper to work. Moen offers a plug button for the lift rod hole in rear of their single faucets. I liked the Addison style over the Moen models. I noticed that over a year ago Ron had the same question. Surely it wouldn't be a great technological issue to create this plug button for customers such as ourselves instead of leaving a non functioning lever in rear of faucet, confusing people using the sink.
Hi Tngal2, Thank you for your question!
At this time we do not manufacture a hole cover for the lift rod opening on the 592-DST faucet. My recommendation is to order a push pop drain and leave the lift rod in for decorative purposes.
Date published: 2016-07-18
Will it hurt the brushed nickel to put a light oil on it to protect from spotting and deposits?
We have hard water and I would like to protect my fixtures with a light oil.
Thank you for your question. We recommend blotting the faucet dry after use to prevent water spots and mineral buildup. You can also use a 50/50 solution of white vinegar and water to remove spots and finger prints.
You may apply Pledge furniture polish on Chrome or Brilliance finishes for a water-resistant surface.
Date published: 2017-06-06
how do I get the stopper out & retrieve something that fell in?
Thank you for your question. If a stopper does not lift straight out, it is being held in by the horizontal rod. Behind the drain pipe under the sink is a horizontal rod connected to the lift rod via the strap. The horizontal rod is held in place by a nut. Remove the nut and pull the horizontal rod straight away from the pipe about an inch. The stopper should now come free of the drain.
Date published: 2017-01-09