What additional parts/diverters do I need to use the 59210-SS with the T17292-SS?
Here is the list I have thus far:
Thank you for your question, Gina Ann. All that you will need apart from the list that you provided is an R10000 rough-in valve for the T17292-SS trim kit.
Date published: 2017-10-24
Does the angle of the shower head adjust?
The attachment from the slide bar to the shower head looks like it allows us to adjust the angle of the shower head-up, down, right, left. It's the part that looks like a ball or half round. Am I correct?
Thank you for your question. Correct, the Delta Premium Slide Bar Hand Shower 59210 unit is designed with an adjustable slide mount that allows for adjustable showering heights.
Date published: 2017-03-29
Can you purchase the Addison wall bar seperate from the handshower?
Would like to buy the wall bar in the Addison collection to match faucet but looking for a multifunction handshower.
Thank you for your question! Unfortunately, the slide bar is not available separately. However, any Delta hand shower will work in place of the included single-setting hand shower.
Date published: 2017-02-15
Delta 59210-SS addison slide bar handshower....why do I need to purchase a wall elbow 50560?
looking at the picture of Addison 59210-SS, I cannot see where the wall elbow is located. I will get a professional installer to install this product. But before I purchase this product I need to know what additional parts are needed. I already have the Addison shower head and tub faucet installed, want to add the slide bar hand shower.
Thank you for your question. A wall elbow is where the supply end of the hose will connect. To divert the water between the hand shower and shower head, you will also need a 3-Setting Diverter, such as the R11000 valve and a T118_ trim kit.
Date published: 2016-05-03
For 59210-ss what valve do I need so that we can set the temp and leave it then only turn on and off the water.
Also, what trim goes with 59210-ss for the valve and the shower hose connection?
Hi Bob, Thank you for your question. You will need to install our R10000 multichoice universal rough in valve. The trim that coordinates with the 59210-SS and allows you separate control over temperature and volume is the T17092-SS. You will also need the 50560-SS wall elbow to complete your installation.
Date published: 2014-07-23
Handshower Diverters & Installation with Remodel
In the Q&A on the T17T292-SS page (http://www.deltafaucet.com/bath/details/t17t292-ss.html#/?tab=ask_answer), there are two questions regarding adding a handshower that suggest the original installation was complete, and the handshower was a later add-on.
If starting from scratch with a remodel, and using the T17T492-SS / 59210-SS combination, are there other options besides using the Delta U4923-RB-PK or Delta U4929-SS-PK diverters to select shower/handshower/or both? Any factors to consider between the U4923-RB-PK or Delta U4929-SS-PK diverters?
Hi Ryan, Thank you for your question. The U4923-SS-PK and the U4929-SS-PK are diverters that mount on the shower arm behind the showerhead and allow you to switch functions between the fixed and handheld showerhead when attached. To plumb everything behind your wall you will need to have the R11000 diverter rough in, the T11892-SS diverter trim, and the 50560-SS wall elbow. This diverter will be plumbed above the T17T292-SS and will allow you to switch between both showerheads or use both at the same time.
Date published: 2013-12-20
We are plumbing for the Delta slide bar hand shower. How far from the bar should the water supply be plumbed?
Thank you for your question. Delta Faucet model # 59210 does not have a standard that we can recommend for how far from the water to plumb the wall bar. It is based on family needs. You will want to make sure there is enough slack in the hose for all your family needs.
Date published: 2013-10-22