Cassidy

Single Handle Channel Bathroom Faucet

Download Image

598LF-RBMPU is rated 4.5 out of 5 by 20.
  • y_2019, m_3, d_21, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_598LF-RBMPU, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 87ms
  • REVIEWS, PRODUCT
  • 1 or 3-hole 4" installation
  • Includes deck plate to support 3-hole installation
  • Metal drain pop-up assembly in matching finish included
  • WaterSense® Labeled
Finish: Venetian Bronze
List Price*: $527.40
Base Parts
598LF-RBMPU
List Price*: $527.40
Configurable Parts
You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Delta WaterSense labeled faucets, showers and toilets use at least 20% less water than the industry standard—saving you money without compromising performance.
  • Open channel spout creates a harmonious waterfall ambiance
  • 1 or 3-hole 4" installation
  • Metal pop-up
  • ADA Compliant
  • WaterSense labeled faucet uses at least 20% less water than the industry standard without compromising performance
  • Channel spout

Special Features

  • ADA Compliant

Installation Information


1 or 3-hole 4" installation


  • Escutcheon: Optional Escutcheon Included
  • Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
  • Spout Height: 6-13/16"
  • Spout Length: 5"
  • Drain Type: Metal pop-up
  • Valve Type: Ceramic valve
Rated 5 out of 5 by from Style Nice faucet to update bathroom seems to be quality built no cheap construction
Date published: 2018-03-17
Rated 4 out of 5 by from Unique look The open trough design is a unique look that complemented our bathroom remodel featuring weathered board wallpaper, a dune border, a sandy counter top and a driftwood vanity. A major failing is the length of the horizontal rod for the pop up drain, a meager 6". The sink I chose was a deep flat bottomed oval and really required a 12" rod. I made two calls to Delta to obtain a longer rod. Call one resulted in a 12" rod for an entirely different product and call 2 caused another 6" rod to appear <sigh>. I cut the 12" rod and used duct tape and zip ties to attach it to the 6" rod to cleanly reach the pull up.
Date published: 2017-07-24
Rated 5 out of 5 by from Attention Getter We purchased 3 of these faucets for the master and guest bath during a recent remod project They operate to our full satisfaction and look beautiful with the new granite countertops. My only concern is how well the finish inside the trough area will hold up but time will tell on that. Not too concerned however because of Delta's solid reputation on standing behind their products.
Date published: 2017-07-15
Rated 5 out of 5 by from Beautiful! We had this faucet installed in a half bath and its absolutely beautiful! We've received many complements on it.
Date published: 2017-06-29
Rated 5 out of 5 by from Classic! Bought this in chrome, looks beautiful, works great. Happy all of with the Cassidy Collection I purchased for my bathroom.
Date published: 2017-06-27
Rated 5 out of 5 by from Great Faucet..clean old school design Ordered 2 for a master vanity. Works and functions well...homeowner liked the old school pump design. [This review was collected as part of a promotion.]
Date published: 2017-06-27
Rated 5 out of 5 by from Great Investment Looks fantastic with the new vanity cabinet as part of our bathroom remodel. Really like the brushed stainless steel finish.
Date published: 2017-05-02
Rated 4 out of 5 by from Nice design I purchased this faucet several months ago and have had no issues with it. I like the style and overall design. If I had a complaint it would be with the drain. The one it comes with will only work on a sink with an overflow. It will not work with any type of vessel, glass, or stone sink. This added expense and a hard time matching the finish.
Date published: 2016-12-11
  • y_2019, m_3, d_21, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_598LF-RBMPU, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • REVIEWS, PRODUCT

Alternative plate installation for Cassidy Single Hole - Single Handle Channel Spout Faucet?

I have a bath counter configured with 3 holes and the 2 outer holes are 8&quot; apart. I know this bath faucet comes only with a 4&quot; plate which will not cover the outside holes. However if I purchase separately RP71545 (the plate for the Cassidy Single Handle Pull Down Kitchen Sink Faucet), will it work with this bath faucet to cover the outer holes?
Asked by: Dex
Thank you for your question. Delta Faucet model # RP71545 is not compatible with the 598LF-RBMPU. We recommend that you add a couple of soap dispeners and use one for soap and one for lotion. We recommend Delta Faucet model # RP37039RB.
Answered by: Delta1
Date published: 2016-04-30

I need a grid flange for a single wall sink. I Have the Venetian Bronze finish, do you have that option?

Model 598LF-MPU
Asked by: Robt
Dear Robt, Thank you for your inquiry! The RP6346RB is the Grid Strainer drain assembly for the Delta Cassidy Lavatory 598LF-RBMPU faucet model. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6346RB Best regards, Tanya
Answered by: Tanya
Date published: 2017-06-26

Do you have a template for this sink?

I need to give my granite guys a template for them to make a cut out to install the sink. Do you have one? Hoping you can mail me one.? Thank you!
Asked by: Sdd
Hi Sdd, Thank you for your question. Unfortunately, we do not have a template for the installation hole. We recommend a hole size of 1 1/8&quot; to 1 1/2&quot;. Please refer to the Technical Specifications for this and other measurements. https://media.deltafaucet.com/SpecSheet/DSP-L-598LF%20Rev%20F.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-08-08

Is the handle reversible?

I have a kitchen sink faucet with a similar set up, the handle off to the side. I was able to install it with the handle on either side. Is it possible to install the Cassidy single hole - single handle channel spout faucet with the handle on either side? It would be very helpful if it were. It seemed as though there was a picture on your site that showed it the other way but that just may be a reversed image. Additionally, is there a ceiling mounted rain shower haead and mixer valve that accompanies the Cassidy single hole faucet? Thank you for your time and prompt response.
Asked by: KP
Thank you for your question. Delta Faucet model # 589LF-MPU can have the handle on either side. Just remember that if you put the handle on the left side, then the hot and cold will be reversed. Regarding the ceiling mounted showerhead and trim, I would recommend Delta Faucet model # R10000-UNBXHF rough-in valve with the T17097 valve trim. The raincan showerhead is model # RP72568 and the shower arm and flange is either RP61058(6 inches) or U4999(9 inches).
Answered by: Delta1
Date published: 2015-01-18

how far out does the water pour from the channel spout?

We are looking to buy this faucet to accompany the Duravit 1930's pedestal sink which is on 16 3/4&quot; deep from the wall and the basin itself is only 10&quot; front to back. I'm wondering if this faucet will work with the Duravit sink without spilling and splashing all over?
Asked by: vrana
Hi Vrana, Thank you for your question. At high flow the water extends from the end of the spout approximately 5&quot; on the model 598LF-MPU. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-06-18

we recently purchased a 598LF-MPU faucet, the drain is for an over flow sink and ours is not. Can I get the top screw lip on top for a non overflow sink ?

Asked by: Michael B
Thank you for your question, Michael B! The drain assemblies designed for sinks without overflow holes will use different parts than a standard pop up assembly and the flange body can not be substituted for use with the rest of the drain and stopper for your model. An entire Push Pop-Up or Grid Strainer less overflow assembly will be needed and I will include a link to our current selections below. https://www.deltafaucet.com/search-results?searchTerm=less+overflow#resultPage=0&amp;offset=0 Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-02-04

My water flow has almost stopped. I get sediment due to well water. How can I open and clean any filters if sediment to restore flow

Asked by: Tom burns
Hello Tom, Thank you for your question and I am sorry to hear that you are experiencing low flow from your Delta faucet. We do recommend to flush the valve to make sure no debris is causing the low flow. To flush, first turn off the water supply to the faucet. 1. Remove the handle. On the lever handle, you should find a Phillps head screw under the top cap cover. The handle will lift off when this screw is loose enough. 2. Once the handle has been removed, unscrew the dome-shaped cap. The domed shaped cap will unscrew counter-clockwise. 3. Once the cap has been removed, grasp the round metal stem. The valve cartridge will pull straight out. Also remove the flow restrictor and rinse these parts. You will need to reinstall these parts later, so be sure to note how they are positioned in the valve. 4. Now, with the valve completely disassembled, place a bucket upside down over the top of the empty brass valve body. Turn the hot and cold water supplies back on and let the water run for about 10 to 15 seconds. The water will come directly up out of the valve and should mostly be deflected back into the sink by the bucket. You might have a little bit of water to clean up, though! 5. Shut off the water supplies. Reinstall all parts. If the flow is not better, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2019-02-18

Can I use this Delta Cassidy single hole channel spout on an IKEA sink that comes with an IKEA Godmorgen sink cabinet with 2 drawers?

Asked by: Carolyn
Hi, Carolyn! Thank you for your question. Our 598LF-MPU faucet should fit all standard sinks. Here is the faucet's technical specifications to verify that your faucet will fit in your sink. https://media.deltafaucet.com/SpecSheet/DSP-L-598LF%20Rev%20F.pdf Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-03-16
  • y_2019, m_3, d_23, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_598LF-RBMPU, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 89ms
  • QUESTIONS, PRODUCT