Cassidy™
Single Handle Channel Vessel Bathroom Faucet
Model#: 798LF
- 1 or 3-hole 4" installation
- Backed by Delta Faucet’s Lifetime Limited Warranty
-
Water-Efficient
-
No-Lead Compliant
-
WaterSense® Labeled
List Price*:
$418.70
- Open channel spout creates a harmonious waterfall ambiance
- Single hole installation
- Less pop-up
- ADA Compliant
- Single hole installation
- WaterSense labeled faucet uses at least 20% less water than the industry standard without compromising performance
- Assembled dimensions: 11-9/16 in. H x 6-5/32 in. D x 3-13/16 in. W
- Channel spout
Special Features
-
ADA Compliant
Installation Information
Single hole installation
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Spout Height: 11-9/16"
- Spout Length: 5"
- Drain Type: Less pop-up
- Valve Type: Ceramic valve
Rated 4 out of
5
by
sb76 from
So far, so good!
I purchased this faucet to include in a vanity I’m making out of a vintage dresser. While it’s not hooked up and functional yet (my only reason for removing 1 star), it is exactly that old pump look I am going for. It appears well made, is a beauty, and I feel confident with the Delta brand! Will update once installed.
Date published: 2018-09-22
Rated 5 out of
5
by
Larry A from
Looks great
My wife and I bought this faucet to update our powder room along with a new vessel sink. We love the new look and the faucet works great.
Date published: 2018-08-25
Rated 5 out of
5
by
litehiker from
Worked will with vessel sink
This item worked really well with a vessel sink installed in a guest bath.
Date published: 2015-05-02
I ordered the tall spout and it is spraying too much water I think because I have a low vessel. Is there anyway to unscrew the lower housing or do I need to purchase two new lower spouts
Thank you for your question, Jeanne! The model 798LF does not come apart and the best model for a lower vessel sink would be model 598LF-MPU.
https://www.deltafaucet.com/bathroom/product/598LF-MPU
Best regards, Edward
Date published: 2018-09-16
How do you remove the end cap on the handle so that I can access the valve cartridge?
Thank you for your question, James! The cap can be popped out by hand or using a tool. If you do use a tool, please be careful not to scratch the finish.
Best regards, Jon
Date published: 2018-07-24
Which Copper tube is the hot one? One tube is longer than the other, neither on is marked hot or cold.
Hi, Javan!
Thank you for your question. If you are facing the faucet straight on, the hot supply line should be on the left, and is the longer supply line. The cold supply line is on the right, and is the shorter supply line.
Best Regards,
Rosanna
Date published: 2018-04-20
Is back hot and forward cold?
Hi Abigail,
Thank you for your question. The upright position is cold. Rotating the handle forward increases the temperature.
Best regards,
Jon
Date published: 2017-07-28
Can you adjust the water flow and temperature? Don't see anything about that in the instructions
Dear Todd,
Thank you for your question. The Delta Cassidy Lavatory 798LF-RB faucet has a maximum flow rate of 1.20 gpm @ 60 psi, 4.54 L/min @ 414 kPa. The handle on the side of the faucet turns the faucet on and off and controls the hot and cold water flow.
Best regards,
Tanya
Date published: 2017-03-13
What size hole needs to be drilled in the countertop for a single hole assembly?
Hi Corey,
Thank you for your question! We suggest the hole be 1 1/8" to 1 1/2" in diameter.
Please refer to the Technical Specifications for this and other measurements.
https://media.deltafaucet.com/SpecSheet/DSP-L-598LF%20Rev%20F.pdf
Best regards,
Jon
Date published: 2017-02-27
Is this 798 available with the handle on the left?
Hello Eduardo, Thank you for your question!
The 768LF single handle lavatory faucet is not available with the handle on the left side.
Best regards,
Brandis
Date published: 2016-08-01
Does the 798 model come with a drain assembly?
The spec sheet says "models" (plural) come with a pop-up drain, but then at the end says model 598 only. The picture of the 798 shows what looks like a pull at the top of the fixture for a pop-up drain, but given the note in the spec sheet, I'm wondering about that.
Thank you for your question. Delta Faucet model # 798LF does not include a pop-up assembly. We manufacture a couple of different styles to choose from. There are grid strainer assemblies and push-pop assemblies, with and without overflow holes.
Model numbers are as follows:
RP47648-without overflow holes
RP6346-with overflow holes
72172-without overflow holes
72173-with overflow holes
Date published: 2013-10-22
More Product Options
Explore options to create the perfect product to fit your needs and design style.Featured Accessories
RELATED PRODUCTS View Collection
