Foundations®

Single Handle Centerset Bathroom Faucet

Download Image

B510LF-PPU-ECO is rated 4.5 out of 5 by 46.
  • y_2019, m_9, d_12, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_46
  • loc_en_US, sid_B510LF-PPU-ECO, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 58ms
  • REVIEWS, PRODUCT
  • 3-hole 4" installation
  • Drain pop-up assembly in matching finish included
  • Backed by Delta Faucet’s Lifetime Limited Warranty
  • WaterSense® Labeled
Finish: Chrome
List Price*: $86.55
Base Parts
B510LF-PPU-ECO
List Price*: $86.55
Simple, yet cleanly defined curves make the Foundations Bath Series a well-suited accent to any bathroom décor. Delta WaterSense labeled faucets, showers and toilets use at least 20% less water than the industry standard—saving you money without compromising performance.
  • 3-hole 4" installation
  • Plastic pop-up
  • ADA Compliant
  • WaterSense® labeled faucet uses at least 20% less water than the industry standard without compromising performance
  • Rigid spout

Special Features

  • ADA Compliant

Installation Information


3-hole 4" installation


  • Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
  • Spout Length: 6-1/8"
  • Drain Type: Plastic pop-up
  • Valve Type: Stainless Steel Ball
Rated 5 out of 5 by from Good value, reliable faucet. Works great. Simple desigh, good looking faucet.
Date published: 2019-09-04
Rated 2 out of 5 by from No Hot Water Just installed this faucet. Nice looking and we like it, but the hot side is not giving us hot water. Every other faucet in the house is fine, as always. Everything hooked up correctly. What can this be? I would certainly recommend this product were it not for this malfunction.
Date published: 2019-08-17
Rated 5 out of 5 by from Great features It is very nice and a very good product. I really like the design . So far the water runs okay when you turn it to cold and hot and I really do not yet have any problem with the faucet.
Date published: 2019-08-16
Rated 5 out of 5 by from Beautiful finish , easy operation This was the perfect purchase for the perfect price. Easy installation.
Date published: 2019-07-27
Rated 5 out of 5 by from Nice design We replaced all the bathroom faucets. We like that the faucet is a bit higher than our old one but not too high. We like the rounded curves on the faucet. Water pressure is good. We had a plumber install four of them and it took him about 90 minutes to do all of them.
Date published: 2019-07-20
Rated 5 out of 5 by from Looks great They look and work great. Easy enough to install.the tuff part was removing the old faucets and pop ups
Date published: 2019-07-05
Rated 4 out of 5 by from Nice stainless finish Good faucet, it's the updated model of the Delta faucets I have in my other bathrooms. The only drawback is the cheap plastic drain assembly; for someone looking for a metal drain pipe, you better buy your own or find another faucet.
Date published: 2019-06-12
Rated 5 out of 5 by from Excellent Everything always works great
Date published: 2019-03-25
  • y_2019, m_9, d_12, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_46
  • loc_en_US, sid_B510LF-PPU-ECO, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • REVIEWS, PRODUCT

Does this come in a gold finish? Also need shower spout with hot/cold center handle in Gold finish.

Asked by: Chris
Hi, Chris! Thank you for your question. The Delta B510LF-PPU-ECO Faucet is only available in the Chrome and Brilliance Stainless Steel Finishes. Here is a link to our faucets available in our Polished Brass finish: https://www.deltafaucet.com/bathroom/sink?facetFinish=polishedbrass Here is a link to the shower valve trim kits in our Polished Brass finish as well: https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?facetFinish=polishedbrass Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-08-24

What is the aerator size, thread , and is it male or female aerator? Want to buy a replacement aerator from local hardware store for a couple dollars.

Asked by: JThomas
Thank you for your question, JMartin! The RP61340 aerator is a 1.5 gpm aerator and the size is 15/16"-27 male. https://media.deltafaucet.com/SpecSheet/DSP-L-AERATORS%20Rev%20C.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-04-24

is this faucete meant to be installed on a vanity that slopes down. It seems that the pop up will not work correctly if it is mounted flat

Asked by: bill
Thank you for your question, Bill! The lift rod hole for this model is designed at an angle to allow ease of use but will also help reach the strap below deck and will accommodate most installation holes. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-05-20

have installed 2 - b510lf-ppu-eco in bathroom sinks. i have NO overflo hole in sinks. the supplied drain leaks. Can i get a drain for a no overflo? i will be installing a 3rd faucet. Bill

Asked by: Bill
Hi, Bill! Thank you for your question. The Delta 72172 Push Pop Up Drain assembly is available with Less Overflow Holes. Here is a link to this unit: https://www.deltafaucet.com/parts-product-detail?modelNumber=72172 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-06-18

The packaging for the Faucet B510LF-PPU-ECO contains a small note. It warns not to use Plumber's Putty on the plastic parts for the drain. I overlooked this little label and applied putty. Will I have to remove the putty or what can I expect?

Asked by: ukasaka
Thank you for your question, ukasaka! We recommend silicone for various reasons, the most notable being that plumbers putty will eventually dry up over time, causing potential leak points whereas silicone does not. We would recommend un-installing the drain assembly and using silicone as any leaks due to improper installation methods can not be covered under the warranty. Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-11-26

Is this faucet made in U.S.A.?

Asked by: Lees
Thank you for your question, Lees! We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-12-13

I want to add a swivel aerator but this faucet has no threads

Asked by: Carol
Thank you for reaching out, Carol! Based on the photo, the screen has been removed from the aerator. However, the entire aerator will unscrew from the end of the spout. If it seems stuck, please try soaking it using a rag with a 50/50 white vinegar and water solution for about 15 minutes, then rinse and wipe with a soft cloth. This will help dissolve mineral buildup. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-10-03

Hello. I need to replace the cartridge on a B510LF-PPU-ECO and it requires a specific spanner wrench. Can you tell me what the part number is for the wrench?

Asked by: Mike
Hello Mike, Thank you for your question. We recommend using a rubber strap wrench or rubber jar opener to unscrew the dome shaped cap assembly, under the handle of the Foundations Lavatory B510LF-PPU-ECO faucet. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2019-01-15
  • y_2019, m_9, d_12, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_B510LF-PPU-ECO, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 35ms
  • QUESTIONS, PRODUCT