How do you increase the water pressure?
Thank you for your inquiry! The Delta Windemere Shower BT14296-SS faucet is not designed with an increasing/decreasing pressure adjustment. We would advised making sure the stops (if you have them) are fully open and flushing the valve out, if you are getting low pressure.
Date published: 2017-12-18
Can you preset temperature
Thank you for your question. This faucet has only one handle that turns from off to cold to hot, so you will need to adjust temperature each time you turn it on. However, turning the handle to the same position should give you about the same temperature each time.
Date published: 2017-07-13
Current valve is a two handle system, will this work?
I am doing a remodel. My current valve is a two handle operaration, one to turn on shower and the other for hot and cold. Delta shower and value approx 14 years old. I have attached pic. Will i need a new rough in valve for it to work, or is their an adapter piece on trim? I really can't do a rough in, as i am keeping existing shower enclosure. Unless their is a way to access it, when i remove existing valve cover. If not is their another two handle valve system with a similar style to Windermere that would work? We want it to match, best we can. Already have installed sink faucets in windmere.
Thank you for your question. Unfortunately, this trim will not work with your existing 1700 series shower valve. However, you can use any Monitor 17 series trim using the original valve and cartridge (RP32104).
Date published: 2017-06-19
I need more hot water in the shower. It is luke warm when turned all the way to hot. Is this adjustable? I tried turning the hot water heater up but still only luke warm water in the shower. All the other faucets have hot water.
Thank you for your question, Laura19! The rotational limit stop found on your cartridge may simply need to be adjusted to allow more hot water to mix in the valve. The instructions for making this adjustment can be found on step 3, page 6 in the installation manual. If you have any question or need assistance please contact us directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at email@example.com.
Best regards, Edward
Date published: 2018-06-26
I currently have a 1400 Series shower faucet. Would like to replace with this one. Will I need to replace the current valve?
Thank you for your question. Any new Monitor 14 series shower trim will fit an existing 1400 series valve body. The new trim will come with a new valve cartridge assembly. This new cartridge will not work in the existing valve. You will want to keep your same, white cartridge. If you do need to replace the cartridge, you will want to replace with a RP19804 cartridge.
Date published: 2019-03-22